Cam Shaft: 997 Turbo (based on Porsche 911) news
#1
Senior Moderator
Thread Starter
Cam Shaft: 997 Turbo (based on Porsche 911) news
Press release...
Punctually for the 50-th anniversary of Porsche's 911 – almost unimaginable that, there is this epitome of the brand from Zuffenhausen since 1963 – the company CAM SHAFT in the Lower Rhine Kempen, has changed the outfit of Porsche 997 Turbo, which is meanwhile the sixth generation of the 911, that fulfils unlimited once again the reputation of distinctiveness.
CAM SHAFT specializes just on creating and implementing unique designs with its Europe-wide exclusive customer base. Customers from Budapest, Vienna, Monaco, Zurich, Amsterdam, up to the north of Oslo find the way to the Lower Rhine Kempen near Dusseldorf. Special wishes of any kind of extraordinary design are, where feasible, implemented and each vehicle leaves the spectacular industrial premises as absolute unique with incomparable recognition factor. CAM SHAFT stands not only for monochrome foliation, how we get meanwhile on almost every corner, but rather here the customer requests are objectively taken into consideration, as unusual as may be, with the highest quality demands. And usually the hoped-for result is even far exceeded!
Back to our jubilee. The two colour extremely complex retro - design foliation in a balanced interplay of light blue and orange accounts for € 2800.00. 700.00 € are added for door sills and visible edges. Certainly not a bad investment, since hardly anything is considered uglier, if with the doors open, the original colour leaps out of the otherwise fully foiled car.
By the way, Porsche 997 Turbo before the refinement has been passed through the capable hands of Dortmund Tuner 9ff, with the following changes: exhaust system including Sportkats and headers, larger intercooler, air filter, fuel pressure regulator, and of course the adapted electronics. In addition, 65 kg weight could be saved. Performance upgrade- considerable acceleration values: 0 to 100 km/h in 3,8 seconds, from 100 to 200 km/h in 6,0 seconds and from 100 to 300 km/h in 20,3 seconds. The Porsche has 650 hp (= 478 kW), whereby the torque is limited to 800 Nm, in order to avoid damage. The coupling is of course also adapted to the performance. A height adjustable system from Bilstein and the set of rims OZ-Ultralegera benefit driving dynamics. In terms of interior upgraded bucket seats are also to mention.
CAM SHAFT specializes just on creating and implementing unique designs with its Europe-wide exclusive customer base. Customers from Budapest, Vienna, Monaco, Zurich, Amsterdam, up to the north of Oslo find the way to the Lower Rhine Kempen near Dusseldorf. Special wishes of any kind of extraordinary design are, where feasible, implemented and each vehicle leaves the spectacular industrial premises as absolute unique with incomparable recognition factor. CAM SHAFT stands not only for monochrome foliation, how we get meanwhile on almost every corner, but rather here the customer requests are objectively taken into consideration, as unusual as may be, with the highest quality demands. And usually the hoped-for result is even far exceeded!
Back to our jubilee. The two colour extremely complex retro - design foliation in a balanced interplay of light blue and orange accounts for € 2800.00. 700.00 € are added for door sills and visible edges. Certainly not a bad investment, since hardly anything is considered uglier, if with the doors open, the original colour leaps out of the otherwise fully foiled car.
By the way, Porsche 997 Turbo before the refinement has been passed through the capable hands of Dortmund Tuner 9ff, with the following changes: exhaust system including Sportkats and headers, larger intercooler, air filter, fuel pressure regulator, and of course the adapted electronics. In addition, 65 kg weight could be saved. Performance upgrade- considerable acceleration values: 0 to 100 km/h in 3,8 seconds, from 100 to 200 km/h in 6,0 seconds and from 100 to 300 km/h in 20,3 seconds. The Porsche has 650 hp (= 478 kW), whereby the torque is limited to 800 Nm, in order to avoid damage. The coupling is of course also adapted to the performance. A height adjustable system from Bilstein and the set of rims OZ-Ultralegera benefit driving dynamics. In terms of interior upgraded bucket seats are also to mention.
#2
Senior Moderator
Thread Starter
#3
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
#4
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Thread
Thread Starter
Forum
Replies
Last Post
mlody
5G TLX (2015-2020)
85
12-04-2019 02:11 PM
ExcelerateRep
4G TL Performance Parts & Modifications
8
10-14-2015 08:20 AM
detailersdomain
Wash & Wax
3
10-09-2015 10:13 PM
joflewbyu2
5G TLX (2015-2020)
139
10-08-2015 11:16 AM