Launched at the Frankfurt Motor Show on Tuesday, 9th September 2003, the Aston Martin DB9, became the first car to be produced at the company’s modern facility in Gaydon, Warwickshire. The innovative DB9 began an exciting new era for Aston Martin as it took on a fresh direction with new models.

Using a radical new aluminium bonded frame, the 2+2 DB9 remains one of the most sophisticated and technically advanced sports cars in the world. It successfully balances the attributes of a sports car with features normally found in luxury cars.

Dr Ulrich Bez, Chairman and Chief Executive Officer of Aston Martin said: "All cars built at Gaydon are based on Aston Martin's new VH [Vertical Horizontal] architecture. It's the first time in our history that we have had a totally flexible yet dedicated Aston Martin architecture. The DB9 is the first car to use it making it the most important Aston Martin ever."

DESIGN

The Aston Martin DB9 is a modern interpretation of a traditional Aston Martin sports car, representing a contemporary version of classic DB design elements and characteristics.
In true Aston Martin tradition, the DB9 reflects the company’s reputation for superb styling and continues a long history of beautiful sports cars

Key traditional Aston Martin features incorporated into the DB9 include the distinctive grille, side strakes and clean, crisp, uncluttered lines.

Clean and elegant surfacing

Aston Martins are not edgy cars - they don't have sharp surfaces or pronounced power domes. The bodywork is elegant and gently curved, with the side profile being very clean, with a single-sweep roofline. There is a pronounced boot - a noticeable feature of the DB4 and DB5 - and the haunches on the rear wings are wide and curvaceous.

A great deal of time was spent on detailing,. In particular, focus was placed on cutting down fuss. There are very few cut or shut lines. Each of the headlamps is set in a single aperture in the front wing.

There is no separate nose cone, another typical source of sports car design fussiness. The aluminium bonnet runs all the way to the leading edge of the car. This accentuates the length of the bonnet and the power of the car, all front cut lines emanate from the grille.

The DB9's bumpers are invisible. The front number plate is part of the crash structure and computer modelling has enabled Aston Martin to use invisible 'hard pressure zones' to cope with bumps.
The DB9 appears as if it were milled out of a single solid piece of aluminium, with the absence of fussy detailing and a minimum of shut lines have which helped create unparalleled elegance.
The side strakes - an Aston Martin DB signature - are made from metal. The door handles are flush with the body opening the unique 'swan wing' doors, which rise at a 12-degree angle for improved access.

There are no visible gutters on the roof panel, and no visible drain channels at the front or rear windscreens. Nor are there any plastic 'dressing' plates.

The importance of good stance

The way a car sits on the road is crucial, a sleek, long look is what Aston Martin wanted to achieve.
The wide track and long wheelbase are further advantages. Compared with the outgoing DB7 Vantage, the DB9's wheelbase is 149mm longer, yet the track is 52mm wider at the front. Yet overall length and width are only marginally increased. The 19-inch wheel has taken into account the optimal size for this car's design and dynamics, although different wheel styles are available.

The low bodywork, relative to the wheels, is possible because of the suspension design. The front suspension uses wishbones that 'fit' within the diameter of the wheels. This narrow spacing, between top and bottom wishbones, means the bodywork can be low - because there is no high suspension to clear. It also improves camber stiffness, improving handling.

The DB9 has the best quality and most luxurious cabin in the 2+2 sports car class. As with the exterior, the design is simple and elegant and a premium quality look and feel impress upon the driver.
The latest technology is also essential, and that's exactly what the DB9 customer gets, but in an Aston Martin, the technology is aimed at increasing the driving pleasure. There are no computer gimmicks. Aluminium is used for door handles, on the dashboard, in the instrument cluster, and for some trim panels. The most distinctive use of aluminium is probably in the instruments. The dials are made from aluminium, and are of noticeable 'three dimensional' design. They are flood lit, not back lit - making them especially attractive and clear at night.

There is a wide range of leather colours, supplied by Bridge of Weir in Scotland. In addition, a customer may specify their own choice of colour. The hides are particularly soft and supple. The leather skins the seats and is used widely throughout the rest of the cabin.

Aston Martin spent a lot of time considering how best to use wood. Today wood is typically used as an appliqué, strips of highly polished veneer simply adding decoration to the car. The wood in the DB9 is more structural using large pieces of wood, rather than small strips.

Wood is used in two places only: on top of the centre of the dashboard and, if the customer chooses, for the door trim. Four types of wood are offered: walnut, mahogany, piano black and bamboo. The wood is one piece, so it looks completely different from burr strips, and can be oiled rather than high gloss.

The driver’s first interaction with the V12 engine rests in the dashboard with the clear glass starter button. Unlike most car starter buttons which are plastic the glass adds class to the cabin inviting the driver with a deep red glow to start the engine.

A great deal of effort has been put into ensuring that the DB9 is stable at high speed and has excellent front-to-rear lift balance. Aerodynamic performance was tuned using Computational Fluid Dynamics (CFD), at Volvo's studios in Sweden. This is one of the most advanced and effective ways of ensuring good drag figures and excellent stability.

Aston Martin also used England's Cranfield University's state-of-the-art 40 percent model wind tunnel, which is widely used for motorsport.

Just as much effort was put into the underside, as the top side. A full undertray reduces lift and drag, and wheel arches are carefully profiled to allow for good airflow. Even the exhaust silencer has been shaped to be as aerodynamic as possible.

The designers of the DB9 balanced beauty with aerodynamic performance. Sharp corners and chiselled profiles can reduce Cd figures, but can also lead to bland and unsightly styling. Pushing wheels out to each corner, in the Aston Martin tradition, improves stability and handling but also means 'Coke bottle' curves down the car's sides, which can have an effect on the Cd figure. The DB9's drag coefficient is 0.35, similar to that of the Vanquish S.

The DB9 is one of the most sophisticated 2+2 sports cars available in the world today.
The Aston Martin engineers' goal was to make a beautiful, distinctive car that was also outstandingly nimble and fast, and a car that was a worthy successor to the DB7 – one of the most significant Aston Martins in history.

In every case, technology is used to make the car better and to make the driving experience more enjoyable. In most cases, the technology is invisible, always there, always helpful, never intrusive.
In a long list of technological innovations, the most important is the bonded aluminium frame. Aston Martin believes it is the most structurally efficient body frame in the car industry. The new Aston Martin VH (Vertical Horizontal) aluminium architecture gives immense benefits. It is very light, aiding performance, handling, economy and durability. It is also enormously strong. Despite being 25 percent lighter than the DB7 bodyshell, the DB9 structure has more than double the torsional rigidity.
This is the car's backbone, the skeleton to which all the mechanical components are either directly or indirectly mounted. Drawing on the experience and technology originally pioneered in the Vanquish, the DB9's frame is made entirely from aluminium. Die-cast, extruded and stamped aluminium components are bonded using immensely strong adhesives, supplemented by mechanical fixing using self-piercing rivets.

"It is far superior to the conventional steel saloon-based floorpan often used by high-volume brands," says Aston Martin DB9 Chief Programme Engineer David King.

"The torsional rigidity of a car is a key factor in driving enjoyment and good handling. Any flexibility of the body compromises the performance of the suspension, delays vehicle response and corrupts feedback to the driver."

The frame is made in aluminium and the body panels are then fitted, again using adhesives, in the advanced body assembly area at Aston Martin's new Gaydon facility. This adhesive is applied by a robot - the only one at Aston Martin. Computer controlled hot-air curing ensures the highest standards of accuracy and repeatability.

The bonding has enormously high stiffness, so that shakes and rattles are obliterated. Bonding also has excellent durability offering better stress distribution than welding - which is more prone to crack. The process is also used in the aircraft industry and Formula One.

There are also advances in the welding procedure. On the DB9, the upper and lower C-pillars are joined by advanced ultrasonic welding. It works by using a vibrating probe, called a sonotrode, which oscillates at 20,000 Hz. This high frequency of vibration agitates the molecules of the two aluminium panels to be joined, allowing them to form a molecular bond.

Because the bond takes place at a molecular level, it is 90 percent stronger than a conventional spot weld. It also requires only five percent of the energy of conventional welding, and as it generates no heat, there is no contamination or change in the characteristics or dimensions of the metal. Aston Martin is the first car company in the world to use this technique.

In addition to the aluminium frame, other lightweight or high-technology materials are used extensively. The bonnet, roof and rear wings are aluminium. The front wings and bootlid are composite. Cast aluminium is used in the windscreen surround, another industry first. Magnesium alloy, which is even lighter than aluminium, is used in the steering column assembly and inner door frames. The driveshaft is made from carbon fibre. It is part of the torque tube that rigidly connects the front engine to the rear gearbox. This arrangement helps the DB9 achieve perfect 50:50 weight distribution, further improving handling.

The DB9 uses all-round independent double-wishbone suspension. As the body frame is brand new, the chassis designers were able to start from scratch - rather than be forced to develop a suspension for an adapted saloon car platform. The front suspension is mounted on a cast aluminium subframe. At the rear, another subframe carries the rear suspension as well as the rear transaxle. Forged aluminium wishbones are used front and rear, as are aluminium-bodied dampers. This is rare, even on top-end sports and GT cars.

The steering rack is mounted ahead of the front wheels, which provides better control under extreme steering loads and heavy braking. Magnesium alloy is used in the construction of the steering column. Even the wheels have been specially designed to save weight. The 19-inch alloys are made using flow forming rather than casting. This saves about 1kg per wheel, benefiting unsprung mass, overall vehicle weight, and reducing rotational inertia. The tyres have been specially developed by Bridgestone.

On a 180+mph performance car, superb brakes are essential. The large discs (335mm front, 330mm rear) are ventilated and grooved, rather than cross-drilled.

"Grooving is more efficient than cross drilling," says David King. "The pads are kept cleaner and work more effectively. Also, brake pad dust can block cross-drilled discs, which reduces braking performance."

The calipers are made from a single casting, rather than being fabricated in two halves and then bolted together. This increases strength and rigidity and gives superior braking performance at high speeds.

"This project was such a pleasure to work on," comments King. "We really could start from scratch in just about every area which rarely happens in the car business. We were not fighting compromises, such as having to adapt a saloon car component into a sports car."

Braking is improved by Electronic Brakeforce Distribution (EBD), which is computer controlled to optimise the front-to-rear brake balance, and by Brake Assist - in which the car's electronics detect when the driver wants to emergency brake and automatically applies maximum braking force, cutting stopping distance. There is also the latest anti-lock (ABS) system, which prevents the car skidding or sliding out of control.

LED tail lamps improve rear lighting performance and also react quicker - in braking, for example - than conventional incandescent bulbs. Their design in the DB9 is novel: the tail and brake lamps project through a reflector, which disperses the rays more evenly, further improving lighting performance. This also gets rid of the little 'hot spots' that make up most LED tail lamps. Rather than a series of clearly visible dots, the light is one solid block.

Dynamic Stability Control (DSC) is standard. DSC is an advanced electronic control system that continually analyses wheel speeds, steering angle and yaw rate. It reduces the risk of skids by automatically applying braking to individual wheels, or reducing engine torque.

The DB9's entire electrical architecture is state-of-the-art, the result of a partnership with Volvo, which uses multiplex electrical systems in its product range. "It's a very advanced system, allowing every module on the car to talk to every other module."

The air conditioning and climate control system is one of the most compact and efficient units in production. The instrument pack is particularly attractive and innovative and all dials are made from aluminium. Microperforations allow the warning lights to illuminate through the aluminium. The rev counter runs anti-clockwise to maximise the visible area for the central electronic display, in the main instrument cluster. It's also a nice reminder of earlier Aston Martin models such as the Atom and the DB2.

There is no conventional red line on the tachometer. A red warning symbol will be displayed when maximum revs are reached but - thanks to the high-tech electronics - the 'red line' varies, depending on the engine's mileage, how recently the engine has been started, and ambient temperature.
The electronic message displays in the main instrument cluster, and in the centre console, are organic electroluminescent displays (OEL). This is another car industry first.

There are many benefits to OELs compared with conventional LCDs, including higher resolution and greater contrast, and improved clarity, particularly when viewed from an angle.

The in-car entertainment (ICE) system is state of the art. It has been developed by Scottish-based Hi Fi experts Linn, and includes its own amplifier and speakers that are specially designed for the DB9. It also benefits from the DB9's high-quality fibre optic electronics, which pass signals with total clarity. The top-of-the-range 950W Linn Hi Fi system uses 10 speakers and a 200W sub-woofer controlled by an in-built accelerometer that even compensates for changes of pressure in the car's interior.

Aston Martin wanted to make the DB9 one of the safest sports cars in the world. For this, as with the electrical architecture, Aston Martin's engineers turned to Volvo for assistance.

"Volvo is renowned as the automotive safety leader," says David King. "It was the perfect partner to assist in delivering the DB9's outstanding safety performance.

"This car was developed in-house, by Aston Martin's small but highly skilled engineering team," says King. "Yet there were some areas where it made sense to draw on the expertise of members of the Premier Automotive Group.

"Safety is one example. We are very fortunate to have Volvo as a partner. This partnership has given us access to the latest safety technologies, best-practice design guidelines and advanced computer aided engineering."

All crash testing was done by Volvo in its state-of-the-art safety centre in Sweden. The VH architecture was designed to provide a supremely robust passenger cell that cocoons its occupants. The cell is protected at the front and rear by extruded aluminium crumple zones. Dual-stage driver and passenger airbags, and seat-mounted side airbags, offer further protection, as do seat belt pretensioners.

"When you're attempting to build the world's greatest 2+2 sports car - and that's certainly the goal for the DB9 - there really is no substitute for a V12," says Aston Martin's Chief Powertrain Engineer Brian Fitzsimons. "Aston Martin's V12 is acknowledged as one of the best in the world, so was a very good starting point."

The engine is developed from the V12 used in the Vanquish. The advanced quad-cam 48-valve engine has been designed by Aston Martin engineers in partnership with Ford's RVT (Research and Vehicle Technology), and is unique to Aston Martin.

The crankshaft is new, as are the camshafts, inlet and exhaust manifolds, the lubrication system and engine management. The result is more low-down torque and a more seamless power delivery. Maximum power is 450bhp and maximum torque 420lb.ft. Even more impressive, 80 percent of that maximum torque is available at only 1500rpm.

"This car will overtake in any gear, at any revs, more or less any time. It really is that good," says Brian.

Comparing the Vanquish's engine to that of the DB9, Fitzsimons comments: "The Vanquish offers more ultimate performance, the DB9 has more torque over a wider rev range," says Brian.

In the new DB9, the V12 - which is a significant 11.8kgs (26lb) lighter than the Vanquish V12 - has been fitted as far back and as low as possible, to assist agility and handling. This helps the DB9 achieve its perfect 50:50 weight distribution.

Engine note is also very important to the driving experience. "The Aston V12 engine has been described as having the best sound in the world," says Brian . "We spent a great deal of time getting the 'music' of the DB9 just right."

The DB9 is fitted with a rear transaxle to help achieve the ideal 50:50 weight distribution. The front mid-mounted engine is connected to the rear gearbox by a cast aluminium torque tube, inside is a carbon fibre drive shaft. The use of carbon fibre prevents any flex and ensures low rotational inertia, improving response and cutting both noise and vibration.

Two transmissions are offered: a six-speed ZF automatic gearbox and a new six-speed Graziano manual gearbox. The ZF automatic used in the Aston Martin DB9 is particularly innovative. The DB9 is one of the first cars in the world to use a shift-by-wire automatic gearchange. The conventional PRNDL gear lever has been replaced by a system of buttons that select park, reverse, drive or neutral.

"It's easy to use and gets rid of the clutter associated with the automatic gear lever on the centre console," says David King.

Those choosing the ZF automatic can drive the car in full auto mode, or can change gear manually using the paddle shifts. The paddles are made from lightweight magnesium and are directly behind the steering wheel, at the ten-to-two position. They allow instant Touchtronic gearchanging.

A great deal of time has been spent ensuring that the new Graziano manual gearbox has a smooth and fast shift action. "It is one of the best manual gearchanges in the world," says David King. "Driving enjoyment is a very important quality of the DB9, and part of this is a superb gear change action."

The manual uses a twin-plate clutch, compared with the DB7 Vantage's single plate unit. It is more compact, has lower rotational inertia and is more robust. The clutch effort is also reduced.

The 'swan wing' doors are unique and have become one of the car's trademarks. They open out and up (by 12 degrees) making for easier access, especially for the driver's feet into the footwell. This also improves clearance for the driver's (or passenger's) head between side glass and roof, further easing access. The 12-degree angle also means there is less chance of the doors scuffing high pavements. As they are angled, the doors are easier to close: they shut under their own weight, rather than relying on the driver having to slam them. Beyond 20 degrees opening angle, there is also infinite door checking. This means that the door will stop and hold at whatever position the driver (or passenger) chooses.

The door handles feature LEDs that illuminate when the car is unlocked, allowing the handles to be located easily in the dark. The exterior handles lie flush with the door, to improve appearance and aerodynamics.

The DB9 has enjoyed thorough testing programme. Ninety-three prototypes were built and tested in locations as diverse as Nardo in Italy, Death Valley in the USA, and inside the Arctic Circle in Sweden, as well as in laboratories around the world.

As well as using the Cranfield University's state-of-the-art 40 percent model wind tunnel, Aston Martin also used Ford's Environmental Test Laboratory in Dunton, which features one of the most advanced climatic wind tunnels in the world.

Other testing took place at Volvo's world-renowned crash test safety centre in Sweden, and at the vast and superbly equipped Ford test track in Lommel, Belgium.

Producing the DB9 in small volumes allows us to retain our handcrafting skills, it also allows Aston Martin to use bespoke engineering solutions, such as the bonded aluminium structure and the aluminium instrument pack and the Linn ICE system. This is not possible in mass production.
Dr Ulrich Bez, Chairman and Chief Executive Officer of Aston Martin said: "We're confident that it is the finest 2+2 sports car in the world, and will continue the Aston Martin success story that is one of the highlights of the British motor industry in recent years."

"The DB9 has been designed as a sports car but with GT levels of comfort and cruising ability," says Dr Bez. "It is aimed at people who love driving but also enjoy exclusivity and style.

"It is the perfect vehicle to take you from London to the south of France, or to drive for the sheer exhilaration. It is fun and very focused on the driving experience, but also offers all the comforts you would expect from an Aston Martin grand tourer. "This car is new from the ground up. We made sure that every solution was the correct one for the DB9. This is important for a car that we believe will lead the 2+2 seater sports car class for many years to come." The DB9 manages to combine all facets of style, quality and useability of a traditional Aston Martin without relying on retrospective detail or design. It is a totally modern Aston Martin.

There is no conventional red line on the tachometer. A red warning symbol will be displayed when maximum revs are reached but - thanks to the high-tech electronics - the 'red line' varies, depending on the engine's mileage, how recently the engine has been started, and ambient temperature.
The electronic message displays in the main instrument cluster, and in the centre console, are organic electroluminescent displays (OEL). This is another car industry first.

Aston Martin will introduce a revised version of the company’s critically acclaimed DB9 at the 2008 Geneva Motor Show, which includes significant enhancements to standard specification.

These changes include a revised version of Aston Martin’s 6.0 litre V12 engine to deliver improved power and torque. Peak power of 470bhp (350kW) – increased by 20bhp (30Nm) - is now reached at 6,000rpm, resulting in a power to weight ratio of 267bhp per tonne (199kW/tonne) – an increase of 11bhp per tonne over the existing DB9.

Peak torque of 600Nm is delivered at 5,000rpm, providing even more accessible power for the driver, as well a greater performance feel overall. Accordingly, top speed is now 190mph (306km/h) and the benchmark 0-60mph time improves by 0.3 seconds for the Touchtronic transmission – which benefits from a new valve box and integrated transmission controls to achieve quicker gear shifts – to 4.6 seconds and by 0.1 seconds to 4.6 seconds for the manual gearbox.

The latest DB9 also incorporates a series of chassis developments for both the Coupe and Volante derivates. Bilstein dampers are introduced in addition to revised upper suspension arms and retuned suspension bushes to deliver improved ride quality; aiding greater refinement in the Volante and an enhanced sporting feel in the Coupe. The DB9 Volante also benefits from revisions to the front shear panel which increases torsional rigidity by 10%, further improving refinement.

The DB9 manages to combine all facets of style, quality and usability of a traditional Aston Martin without relying on retrospective detail or design. Accordingly, styling changes to the revised DB9 are subtle, reflecting the car’s timeless design and understated elegance.

Exterior styling changes include the introduction of a new standard 19’’ 10-spoke alloy wheel, new door mirrors and a revised anodised aluminium five-bar grille. In the cabin changes include a new centre console constructed from die cast zinc with a painted iridium silver finish and the introduction of a new Emotion Control Unit (ECU) – first seen on the DBS in 2007. The ECU – constructed from glass, polished stainless steel and polycarbonate - replaces the key used previously for the DB9.

The innovative DB9 introduced an exciting new era for Aston Martin. The 2+2 sports car set new standards in its class due to its astonishing combination of technology, agility and design. The car marked the beginning of a new era for Aston Martin and became the first car to be hand-made at the company’s state-of-the-art facility in Gaydon, Warwickshire.

Sales of the DB9 started in spring 2004, and to date, more than 10,000 examples have been produced and delivered to customers around the world – surpassing the DB7 as the most successful Aston Martin of all time.

Deliveries of the updated DB9 begin during quarter two 2008, with prices from Ŗ113,950 for the DB9 Coupe and Ŗ122,950 for the DB9 Volante.

Not to be outdone by the improvements to the "lesser" V8 Vantage, Aston Martin has announced its upgraded DB9 for the 2009 model year. As with the 2009 V8 Vantage, changes are subtle but promise to make for a better all-around car.

Like the V8 Vantage, the DB9 will be getting a boost beneath its bonnet. The 6.0L V12 remains, but power gets a bump from 450 horsepower to 470, with torque figures checking in at 442 lb-ft. The new gusto can whoosh the DB9 from naught to sixty in 4.6, on its way to a top speed of 190 mph.

Handling should also be improved for 2009, thanks to a revised chassis and an upgraded suspension.

Also like the V8 Vantage, the DB9 will receive a new center console and switchgear — which is finished in iridium silver — and will get a new Emotion Control Unit (ECU).

Exterior changes include new side-view mirrors, a revised grille and updated 19 inch wheels.

Aston Martin doesn't actually need to face-lift the DB9. It's got its own fridge on the Cool Wall, it's still selling well and the whole world knows it's stunningly good-looking.

Aston is well aware of this, so the new DB9 looks all-but identical to the last one. (For the anoraks among you, the big news is that the grille has lost a single horizontal bar. Oh, and the wing mirrors are now the same designs those on the DBS.) It's some tribute to the original design that, after four years of sales, this car still looks bang up to date. But perhaps that has as much to do with the other cars in the range looking very similar - if none of them advances the design language, none of them looks old hat.

But there were some areas that needed attention. Similar to the Vanquish before it, the DB9's interior simply had too much of a parts-bin feel. Not now. The fascia from the DBS has been carried over - with a slightly different finish. Gone is the old confusing layout with its myriad buttons, replaced by a simple design that makes it much easier to do everything from work your phone to change a track on your iPod. You even get a proper vanity mirror now, with its own slidey cover, and not a Ford parts-bin glue-on job.

So, bits that needed leaving alone have been left, others have been changed - from this point of view, the DB9 is a big step forward. But unlike the V8 Vantage that Tom Ford has driven, the rest of the experience hasn't been tweaked to where I'd like it.

First, the good news - the Touchtronic transmission has been fine-tuned to give smoother shifts. The old one hindered your progress sometimes because it was a bit clunky, but up- and down-shifts are now much slicker. On the way down, you get a small blip of the throttle (nothing new there), but the more purposeful way it does it is new and better. No wishy-washy hesitation here - you want a gear, you get it.

But everywhere else left me feeling a touch disappointed. Aston is keen to trumpet the extra power you get from the engine, and, sure, 20bhp and 22lb ft aren't to be sniffed at, but when the old DB9 had 450bhp, the differences are, in reality, quite small. The DB9 was a very fast car; now it's a very fast car. It's just a shame this tweak hasn't come with a slightly more hardcore exhaust note - I reckon you'll notice the transmission whine more than the engine.

But the biggest disappointment for me is the chassis. Although this DB9 now has new Bilsteindampers which have resulted in a bit of extra give in the chassis and ride quality, the dynamic problems the DB9 had have still not been resolved. OK, so as a GT, the DB9 performs beautifully, but if you want to ask a bit more of it - go for a drive rather than a cruise - then there are other cars out there, other Astons, that will reward you more.

Get a mid-corner bump, when you're gunning it and the rear suspension is loaded up, and you get this strange rolling effect from the back end. I drove a Sports Pack car a while ago, and the revised spring rates and lower unsprung mass cured this. I was hoping that the face-lift would've done the same thing, but it seems you've still got to specify that option if you want the best-handling DB9.

Which is a shame, because it takes the shine off what is otherwise a much improved car, and one which now has the interior to match the price tag. Aston has listened to the critics to give a much improved V8 Vantage, but it could have done with listening a bit more...

Aston Martin and Bang & Olufsen are proud to introduce BeoSound DB9, a bespoke audio system developed and designed exclusively as an option for the Aston Martin DB9. BeoSound DB9 marks the next chapter in the acclaimed collaboration between the two brands, which began with the BeoSound DBS in 2008.

BeoSound DB9 continues a tradition of innovation established by two brands with an unrivalled history of design and engineering excellence within their respective fields. "Aston Martin and Bang & Olufsen have achieved a reputation as leaders in both design and performance through constant innovation," said Dr Ulrich Bez, Aston Martin's Chief Executive, "we are proud that BeoSound DB9 continues a strong tradition of technology, design and artistry."

"The BeoSound DB9 system demonstrates that consistent commitment to high-tech innovation and traditional craftsmanship skills which is a hallmark of both Aston Martin and Bang & Olufsen," said Bang & Olufsen President and CEO Karl Kristian Hvidt Nielsen.

The Aston Martin DB9 is a thoroughbred sports car with GT levels of comfort and refinement. Combining Aston Martin's unique character with an uncompromising design philosophy, the DB9 was borne out of a synthesis of traditional craftsmanship, high-tech manufacturing, modern components and use of the finest materials.

The BeoSound DB9 shares these values. The system was developed exclusively for Aston Martin to be perfectly matched to the DB9, both acoustically and physically. The unit's design follows the inherent quality and understated beauty of the car's hand-crafted interior, with smoothly contoured, aluminium loudspeaker grilles that integrate seamlessly into the fluid lines and curves of the cabin.

Turn on the BeoSound DB9 and the twin acoustic lens speakers emerge silently and swiftly from either side of the dashboard, adding a touch of theatre and technological panache that is a formidable complement to the emotive roar of the DB9's V12 engine.

The BeoSound DB9 system incorporates proprietary ICEpowerŽ technology; a fusion of high output power and hi-fi sound quality with ultra-compact design and sleek, functional operation. The motorised tweeter units demonstrate Bang & Olufsen's patented and automatically operated ALT (Acoustic Lens Technology), with their placement enabling 180° horizontal dispersion of high frequency sounds, giving listeners an improved sense of space, staging and realism regardless of their location in the car.

In addition to the two tweeters incorporated into the ALT, the system comprises five mid-range speakers, three further tweeters and three woofers, including a powerful 200mm subwoofer mounted beneath the rear bench. In all, thirteen speakers are positioned in ten locations around the car.

The system has been acoustically tuned for the DB9 by Bang & Olufsen's skilled tonmeisters and Bang & Olufsen's advanced Digital Signal Processing (DSP) unit, which stage-manages the musical performance of the thirteen individual loudspeakers for the optimal in-car listening experience. The DSP also provides dynamic modelling that adapts automatically to changing road and noise conditions, enabling the occupants to concentrate on an engaging driving and listening experience. The BeoSound DB9 fitted to the DB9 Volante has been developed to suit the different acoustic characteristics of the convertible, whether open or closed.

Translating such pioneering acoustic technologies into an equally functional and elegant design language is testament to the design excellence and craft tradition of Bang & Olufsen. The BeoSound DB9 system also reflects Aston Martin's ethos of 'Power, Beauty and Soul'. The result is a system that has become an integral part of the DB9, creating an incomparable ambiance that embraces both design and performance.

No sports car manufacturer has a greater design heritage than Aston Martin. Responsible for some of the most beautiful sports cars ever made, Aston Martin imbues every model with understated elegance and graceful styling, achieved through harmonious proportions, taut surfacing, a ground-hugging stance and thorough attention to detail.

Innovation, sophistication, craftsmanship, beauty and, naturally, peerless sound quality are fundamental to any Bang & Olufsen system. Thanks to its focus on elegance and design Bang & Olufsen has become an icon of performance and styling, with a commitment to real materials and exceptional sound and picture quality. The company remains at the forefront of domestic and automotive technology.

The BeoSound DB9 embodies the art of shaping sound to the interior contours of a true performance car, focusing not only on horsepower or output power, but on the overall experience and musicality.

The Beosound DB9 is available to order as an option for both DB9 Coupe and Volante variants immediately.