Toups

I am currently in the process of installing a Pioneer Avic-D1 into my 03 TL-s, but i need some help.

I have located all of the other wires needed, except for the vehicle speed detection circuit. Any help would be greatly appreciated!



Once I get the install completed, I will post pics of the process and the final product, and BTW for those interested, here is the list of parts going in:

Pioneer Avic-D1
Pioneer XM/Navtraffic receiver
Pioneer TS-C1653 Components (front)
Pioneer TS-A1631 Coaxials (rear)

and once I get these in, I will be adding a Kicker RMB8 and a small amp for power. The other thing I will be doing durring the process is covering all of the interior door skins, and door components with 2 coats of QuietCar, as well as the interior fender well (behind the plastic covers) the inside of the plastic covers, the underside of the hood (behind the liner) and the entire trunk. I might do some of the floor under the carpet, just not sure if I will have time.


TIA
Toups

thx2249

If you look under the steering wheel and locate the cruise control harness, it should the blue/white wire that's the VSS.

Check out this LINK