Mounting a 300/4 in TSX
#1
Mounting a 300/4 in TSX
I got my 300/4 installed by StreetEffectz last weekend...
sounds 10x better than the Soundstream Reference amp it replaced!
only problem, they mounted it to the back of the seat and the amp's mounting holes dont line up with the metal in the seat.
so apparantly they screwed it into carpet and obviously on the way home the amp fell off.
I was able to get it to stay by making it all crooked to line up the mounting holes with the metal in the seat, but it looks pretty dumb.
Any suggestions?
sounds 10x better than the Soundstream Reference amp it replaced!
only problem, they mounted it to the back of the seat and the amp's mounting holes dont line up with the metal in the seat.
so apparantly they screwed it into carpet and obviously on the way home the amp fell off.
I was able to get it to stay by making it all crooked to line up the mounting holes with the metal in the seat, but it looks pretty dumb.
Any suggestions?
#2
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
go back in he seems like a good guy I am sure he would fix it.
#4
Get outta here? Oh boy, one of my guys is gonna GET SHOT!! LOL - sorry for the problem, that's definitely uncalled for. I will personally fix it for you if you wanna ride back again, OR, you can remove the amp, unfold the carpeting off the seat, and put a piece of 1/4" or 1/8" hardboard underneathe, secure that to the seat, fold the carpeting back over, and re-secure the amp to that.
#6
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
Originally Posted by StreetEffectz
Installer was fired ![what](https://acurazine.com/forums/images/smilies/what.gif)
![what](https://acurazine.com/forums/images/smilies/what.gif)
#7
Originally Posted by CCColtsicehockey
think that was a little harsh.
Trending Topics
#9
Originally Posted by Playa178
ack....that wasnt my goal haha
just trying to figure out how to mount it properly
guess it could happen to anyone, not a huge deal.
just trying to figure out how to mount it properly
guess it could happen to anyone, not a huge deal.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#10
Racer
Join Date: Jan 2003
Location: New Orleans
Age: 42
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
I have a 300/4 as well that I mounted to the back of my back seat, but i'm an idiot and just drilled it ontop of the carpet, through the carpet to the metal and of course it fell off a few months later.
Do I need to cut the fabric to get a board in there, and do i just screw the board into the metal seat back?
I know that's the best way to do it, but just out of curiosity, how does that give it more support? amp screwed into wood then metal, rather than amp to metal?
-vasu
Do I need to cut the fabric to get a board in there, and do i just screw the board into the metal seat back?
I know that's the best way to do it, but just out of curiosity, how does that give it more support? amp screwed into wood then metal, rather than amp to metal?
-vasu
#11
Originally Posted by vasu
I have a 300/4 as well that I mounted to the back of my back seat, but i'm an idiot and just drilled it ontop of the carpet, through the carpet to the metal and of course it fell off a few months later.
Do I need to cut the fabric to get a board in there, and do i just screw the board into the metal seat back?
I know that's the best way to do it, but just out of curiosity, how does that give it more support? amp screwed into wood then metal, rather than amp to metal?
-vasu
Do I need to cut the fabric to get a board in there, and do i just screw the board into the metal seat back?
I know that's the best way to do it, but just out of curiosity, how does that give it more support? amp screwed into wood then metal, rather than amp to metal?
-vasu
#14
Originally Posted by StreetEffectz
Installer was fired ![what](https://acurazine.com/forums/images/smilies/what.gif)
![what](https://acurazine.com/forums/images/smilies/what.gif)
![Bullshit](https://acurazine.com/forums/images/smilies/bs.gif)
![Blah Blah](https://acurazine.com/forums/images/smilies/blahblah.gif)
I know it's important to keep your "official vendor status" alive and well so you don't become the laughing stock of the A/V forum like El Duderino after CCS
![Owned](https://acurazine.com/forums/images/smilies/owned.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
#15
Acura drove me away too..
iTrader: (2)
Originally Posted by vpat25
![Bullshit](https://acurazine.com/forums/images/smilies/bs.gif)
![Blah Blah](https://acurazine.com/forums/images/smilies/blahblah.gif)
I know it's important to keep your "official vendor status" alive and well so you don't become the laughing stock of the A/V forum like El Duderino after CCS
![Owned](https://acurazine.com/forums/images/smilies/owned.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
#16
Racer
Join Date: Jan 2003
Location: New Orleans
Age: 42
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Hey StreetEffectz, thanks for the tip .. um, I'm still not visualizing it properly.
What do you mean by lining up the holes in the metal? I guess my question is, how would drilling a piece of wood into the metal seat back line it up more than going through the 4 mounting holes on the amp?
Also, are you saying to get a piece of board as large/larger than the amp, or as big as the entire metal seat back?
Are there actual pre-drilled holes in the seat back I'm just not seeing or something?
-vasu
What do you mean by lining up the holes in the metal? I guess my question is, how would drilling a piece of wood into the metal seat back line it up more than going through the 4 mounting holes on the amp?
Also, are you saying to get a piece of board as large/larger than the amp, or as big as the entire metal seat back?
Are there actual pre-drilled holes in the seat back I'm just not seeing or something?
-vasu
#17
Originally Posted by vpat25
![Bullshit](https://acurazine.com/forums/images/smilies/bs.gif)
![Blah Blah](https://acurazine.com/forums/images/smilies/blahblah.gif)
I know it's important to keep your "official vendor status" alive and well so you don't become the laughing stock of the A/V forum like El Duderino after CCS
![Owned](https://acurazine.com/forums/images/smilies/owned.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
It means StreetEffectz made the HIS DECISION to fire him, he always produces quality work, cant say that for a new employee that he just hired. Enough Said
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#18
Originally Posted by xenonhid
It means StreetEffectz made the HIS DECISION to fire him, he always produces quality work, cant say that for a new employee that he just hired. Enough Said ![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
![Owned](https://acurazine.com/forums/images/smilies/owned.gif)
So, my point is, don't put anybody on a pedestal as being perfectly honest, genuine, and intelligent--because then they'll become egotistical assholes (like El Duderino) and ruin the integrity of the forum.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#19
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
anyone want to explain this thread where el duderino got owned cause i missed it and would like to know what happened.
#20
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
Originally Posted by StreetEffectz
Oh no no, he had it coming anyway - and maybe not a big deal to you, but to me, that's my business and work like that should NEVER, EVER leave my shop ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#21
Senior Moderator
iTrader: (5)
Originally Posted by vasu
Hey StreetEffectz, thanks for the tip .. um, I'm still not visualizing it properly.
What do you mean by lining up the holes in the metal? I guess my question is, how would drilling a piece of wood into the metal seat back line it up more than going through the 4 mounting holes on the amp?
Also, are you saying to get a piece of board as large/larger than the amp, or as big as the entire metal seat back?
Are there actual pre-drilled holes in the seat back I'm just not seeing or something?
-vasu
What do you mean by lining up the holes in the metal? I guess my question is, how would drilling a piece of wood into the metal seat back line it up more than going through the 4 mounting holes on the amp?
Also, are you saying to get a piece of board as large/larger than the amp, or as big as the entire metal seat back?
Are there actual pre-drilled holes in the seat back I'm just not seeing or something?
-vasu
wat u do is drill the wood into the metal seat back... cover it with the carpet... and now ur amp can drill into anywhere on the wood... u just made your drilling surface so much larger with the wood...
am i picturing it correctly ron?
#22
Originally Posted by CCColtsicehockey
anyone want to explain this thread where el duderino got owned cause i missed it and would like to know what happened.
page 4 is where the drama begins.
![Drool](https://acurazine.com/forums/images/smilies/drool.gif)
#23
Originally Posted by vpat25
![Bullshit](https://acurazine.com/forums/images/smilies/bs.gif)
![Blah Blah](https://acurazine.com/forums/images/smilies/blahblah.gif)
I know it's important to keep your "official vendor status" alive and well so you don't become the laughing stock of the A/V forum like El Duderino after CCS
![Owned](https://acurazine.com/forums/images/smilies/owned.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
Last edited by StreetEffectz; 11-30-2005 at 11:01 PM.
#24
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
Originally Posted by StreetEffectz
Can you tell me where I said "I have to look into WHO installed it"? I know WHO installed it, I just said one of my guys was gonna get shot, correct????? And I got right on the phone with him and told him I didn't need him anymore - am I missing something here?????????????????
#25
Originally Posted by CCColtsicehockey
nah i understood you the first time.
![Annoyed](https://acurazine.com/forums/images/smilies/annoyed.gif)
#26
^^^Chillax, the only person i've been slandering is El Dude. I even went out of my way to state your credentials. My whole point behind what I said was to keep people from wholehartedly putting their trust in people--THATS IT. So if you wanna start something thats your perogative. I just don't want another "Official vendor" getting pwned and running away. :2 cents: :bitch:
#27
Racer
Join Date: Jan 2003
Location: New Orleans
Age: 42
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KaMLuNg
i am pretty sure what he is saying is that with the piece of wood, it doesn't matte where u place the wood as long as it is as big as the metal seat back...
wat u do is drill the wood into the metal seat back... cover it with the carpet... and now ur amp can drill into anywhere on the wood... u just made your drilling surface so much larger with the wood...
am i picturing it correctly ron?
wat u do is drill the wood into the metal seat back... cover it with the carpet... and now ur amp can drill into anywhere on the wood... u just made your drilling surface so much larger with the wood...
am i picturing it correctly ron?
I guess my question is, if the screws didn't grip well enough into the metal before, what ensures that the wood stays planted to the metal seatback? Because it seems that the bumps in the road caused the screws to just tear out of the metal, so why wouldn't the wood board tear out of the metal seat back?
-vasu
#28
Originally Posted by vasu
When I first mounted my amp I just used self-drilling screws and placed my amp on the metal seat back and just drilled down into the metal (making sure that there was metal underneath each amp mounting hole). But then a few months of driving later it fell out (TSX's firm suspension + potholes in new orleans and boston).
I guess my question is, if the screws didn't grip well enough into the metal before, what ensures that the wood stays planted to the metal seatback? Because it seems that the bumps in the road caused the screws to just tear out of the metal, so why wouldn't the wood board tear out of the metal seat back?
-vasu
I guess my question is, if the screws didn't grip well enough into the metal before, what ensures that the wood stays planted to the metal seatback? Because it seems that the bumps in the road caused the screws to just tear out of the metal, so why wouldn't the wood board tear out of the metal seat back?
-vasu
#29
Racer
Join Date: Jan 2003
Location: New Orleans
Age: 42
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Spoon
Pilot holes almost as big as the screws used and/or screws not long enough to go through amp, carpet, and to really grip the metal and/or screws too thin? If you have four #10 sheet metal screws at least a 1/4" through the metal, they shouldn't pull out. The seat back isn't completely flat, right? I think the board under the carpet just gives you flexibility in mounting location.
I think i might try the long screw approach first .. the ones i was using before were a bit on the shorter side since i was worried about them poking through the other end of the seat cushion .. i'll take some measurements and get some longer ones and if those don't hold, then i'll grab some boards?
thanks
-vasu
#30
Originally Posted by vpat25
^^^Chillax, the only person i've been slandering is El Dude. I even went out of my way to state your credentials. My whole point behind what I said was to keep people from wholehartedly putting their trust in people--THATS IT. So if you wanna start something thats your perogative. I just don't want another "Official vendor" getting pwned and running away. :2 cents: :bitch:
Hey, I'm relaxed - look at your post, you said MY post was "BS" did you not? and you misquoted me, did you not? That's all - I simply stated, and I quote, "one of my guys was gonna get shot" - I know who did the work, I wasn't happy, so I called him right up and told him I didn't need him anymore - there was no "BS" involved in that. You even quoted the times I made both posts, how does that relate to putting trust in people?? I got nothing to hide - quality work comes out of my shop and I need to keep it that way and I need the right people working for me to keep it that way and I just thought your post, like you were calling me out cuz I didn't do what I said or I was making it up, was completely uncalled for.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
And I'm not going anywhere - I've been on these forums for almost as long as they have been opened
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#31
You have to use sheet metal screws in that metal - it is very thin - most people keep using wood screws that they would screw a box together with or whatever....NO GOOD.... definitely need the sheet metal screws.
#32
maybe mods should lock this post, it's getting a bit off topic.
I dont see how slandering El Dude is necessary, he has posted a lot of informative info for everyone and made some great products that people seem to like.
I dont see how slandering El Dude is necessary, he has posted a lot of informative info for everyone and made some great products that people seem to like.
#33
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
Originally Posted by Playa178
maybe mods should lock this post, it's getting a bit off topic.
I dont see how slandering El Dude is necessary, he has posted a lot of informative info for everyone and made some great products that people seem to like.
I dont see how slandering El Dude is necessary, he has posted a lot of informative info for everyone and made some great products that people seem to like.
#34
Rep'n Taxbrain.com
Join Date: Aug 2004
Location: N. Cali-forn-i-a
Age: 44
Posts: 7,075
Likes: 0
Received 3 Likes
on
3 Posts
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Lock](https://acurazine.com/forums/images/smilies/padlock.gif)
We should close this up. I don't think anyone should question Streeteffectz or Elduderino. STreeteffectz has posted tons of pics of his work. There is no doubt that he and his shop has skillz. He had to let someone go because he wasn't living up to the high standards that he has for himself and his shop. Although it seemed harsh because it happened so fast, he did the right thing. In the world of buisness your reputation is everything.
As for Eld, I have been on the forum with Eld for a long time. He contributed a ton of information to this forum. A lot of his informative posts came even before he was a board vendor and before the a/v sections got merged. Although he made a mistake, he had good intentions and was only trying to help people out. I heard many stories of him talking on the phone to installers for forum members. He helped me out a lot during my installs and would always go above and beyond the call of duty. With all that being said, I still don't respect the fact that he just disappeared like that. Hopefully he'll come back.
#35
Originally Posted by elduderino
I put one under the passenger seat of our 04. Took the removal of some padding and the foot warmer vent, and 3mm worth or rear shim washers.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#37
VP Electricity
Join Date: Jun 2004
Location: Portland OR US
Age: 58
Posts: 4,617
Likes: 0
Received 8 Likes
on
1 Post
Originally Posted by vpat25
![Bullshit](https://acurazine.com/forums/images/smilies/bs.gif)
![Blah Blah](https://acurazine.com/forums/images/smilies/blahblah.gif)
I know it's important to keep your "official vendor status" alive and well so you don't become the laughing stock of the A/V forum like El Duderino after CCS
![Owned](https://acurazine.com/forums/images/smilies/owned.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
#39
elduderino
i am trying to send you a PM about your avincar speakers, but it's telling me that your mailbox is full. pm me please when you have some space and i will reply. thanks.
(sorry to hijack the thread)
i am trying to send you a PM about your avincar speakers, but it's telling me that your mailbox is full. pm me please when you have some space and i will reply. thanks.
(sorry to hijack the thread)
#40
Yeehaw
I'm closing this up, Playa178 I hope thats cool with you.
Streeteffects and ElDude are two of the most knowledgable and highly qualified A/V guys on this forum. They both do excellent work which they stand behind. I'm not saying this because they are vendors, I've talked to ElDude many times, and I've seen dozens of Streeteffects installs. The slander is uncalled for.
Streeteffects and ElDude are two of the most knowledgable and highly qualified A/V guys on this forum. They both do excellent work which they stand behind. I'm not saying this because they are vendors, I've talked to ElDude many times, and I've seen dozens of Streeteffects installs. The slander is uncalled for.