The Machine's Acura TL/Supercharged S2000 Build Thread Updated 3/13/16
#242
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Tyler....you need to post more pix
#243
Moderator
iTrader: (3)
I wasn't thinking about it when I took the picture. Now that I look at it, I consider it a compliment because I want the lip spoiler
I think I post more pictures than anyone else in the 3G side
I think I post more pictures than anyone else in the 3G side
#244
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
I dont think so....I think Jeremy and Meko have you beat
#245
Registered Member
Thread Starter
iTrader: (8)
Unless of course you are talking about John's car.
#246
Moderator
iTrader: (3)
Ah true. I'm a top contributor then
I LOVE the lip spoiler. I would love an OEM 04-06 one but they are stupid expensive. The Type-S lip is nice but a bit too big IMO.
I LOVE the lip spoiler. I would love an OEM 04-06 one but they are stupid expensive. The Type-S lip is nice but a bit too big IMO.
The following users liked this post:
The Machine (01-24-2013)
#252
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 30
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Yeah
Naked car ftw
Naked car ftw
#255
2014 Jeep SRT
The following users liked this post:
Undying Dreams (01-29-2013)
#257
Moderator
iTrader: (3)
The following 2 users liked this post by CLtotheTL32:
The Machine (01-29-2013),
Undying Dreams (01-29-2013)
#259
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 30
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
What's in Baggins' pockets? Handsies?!
#260
Moderator
iTrader: (3)
I heard that your hand is always in his pocket that has the hole :ghey:
#261
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 30
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Way to take this thread to gay level 11.
#263
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 30
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
#264
Registered Member
Thread Starter
iTrader: (8)
Time for dat mega update again....ugh where to start....
I wanted to change up the rear some so I decided to debagde the trunk
I had some chips from when my car got repainted after the accident and I wanted those fixed. Also from the license plate bracket on the bumper they put a hole dead center so I had that fixed as well.
BEFORE
AFTER
Since the front was being done I figured now was a good time to install a Domed Decal and the Swift hideaway license plate holder.
Next I decided to do the RDX covers
After the RDX covers I put on the OEM visiors
And last but not least, what everyone has been waiting for! NEW RIMS!!
Varrstoen ES 1.1.1 Hyper Black 18X9.5"F 18X10.5"R +30 all around.
225/40/18 on a 9.5"
235/40/18 on 10.5"
Next mod that will be getting done soon is the Skunk2 UCA
Thanks for looking!!
I wanted to change up the rear some so I decided to debagde the trunk
I had some chips from when my car got repainted after the accident and I wanted those fixed. Also from the license plate bracket on the bumper they put a hole dead center so I had that fixed as well.
BEFORE
AFTER
Since the front was being done I figured now was a good time to install a Domed Decal and the Swift hideaway license plate holder.
Next I decided to do the RDX covers
After the RDX covers I put on the OEM visiors
And last but not least, what everyone has been waiting for! NEW RIMS!!
Varrstoen ES 1.1.1 Hyper Black 18X9.5"F 18X10.5"R +30 all around.
225/40/18 on a 9.5"
235/40/18 on 10.5"
Next mod that will be getting done soon is the Skunk2 UCA
Thanks for looking!!
Last edited by The Machine; 02-24-2013 at 10:50 AM.
The following 5 users liked this post by The Machine:
CLtotheTL32 (02-24-2013),
EL PESADO (02-25-2013),
Phat_Type S (03-11-2013),
rockstar143 (02-25-2013),
Undying Dreams (02-25-2013)
The following users liked this post:
The Machine (02-24-2013)
The following users liked this post:
The Machine (02-24-2013)
The following users liked this post:
The Machine (02-24-2013)
#268
2014 Jeep SRT
I love epic updates.
The following users liked this post:
The Machine (02-24-2013)
#269
Registered Member
Thread Starter
iTrader: (8)
Thanks! And will do. Right now I have no rubbing in the rear which I am extremely shocked at for as close as it is to the fender. The only rubbing I get is in the front when I have the wheels fully turned and hit a dip. It is very very minor though. I wanted to run -1 up front, but I don't think that is going to happen if I rub the little bit I do now. I'll just make it even on both sides and probably run around -2.
#270
Moderator
iTrader: (3)
Holy shit
SO much new stuff! I'm glad you finally put the wheels on. Game changer
SO much new stuff! I'm glad you finally put the wheels on. Game changer
The following users liked this post:
The Machine (02-24-2013)
The following users liked this post:
The Machine (02-24-2013)
The following users liked this post:
The Machine (02-24-2013)
#273
Racer
iTrader: (2)
Thanks! And will do. Right now I have no rubbing in the rear which I am extremely shocked at for as close as it is to the fender. The only rubbing I get is in the front when I have the wheels fully turned and hit a dip. It is very very minor though. I wanted to run -1 up front, but I don't think that is going to happen if I rub the little bit I do now. I'll just make it even on both sides and probably run around -2.
Last edited by turtlecivic; 02-24-2013 at 04:13 PM.
The following users liked this post:
The Machine (02-24-2013)
#275
Registered Member
Thread Starter
iTrader: (8)
Thanks for the kind words guys!
If you are going to go as low as I am, I would definitely recommend a rear camber kit. Before I put these wheels on and lowered it a little more. I was a little over -2 on each side. I'll be getting another alignment soon once the skunk2 uca's go on and post what the specs are. The tires are Achilles ATR Sport.
If you are going to go as low as I am, I would definitely recommend a rear camber kit. Before I put these wheels on and lowered it a little more. I was a little over -2 on each side. I'll be getting another alignment soon once the skunk2 uca's go on and post what the specs are. The tires are Achilles ATR Sport.
#276
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Well done, dude!
Obviously, the date in your title has been changed!
Obviously, the date in your title has been changed!
The following users liked this post:
The Machine (02-24-2013)
The following users liked this post:
The Machine (02-25-2013)
The following users liked this post:
The Machine (02-25-2013)
The following users liked this post:
The Machine (02-25-2013)