DIY - RSX/S2K/EP3 Steering Wheel into an 03 CL
#81
2003 CL
My set up is a bit different. I am using the S2K steering wheel but with an Acura RSX 2 stage airbag. The mounting hardware for this airbag is different so I bought the RSX hardware online & assembled them to the S2K wheel.
#82
2003 Acura CL-S6
Well come to find out, what my friend thought was a s2k wheels really wasn't... And the s2k bag is single stage so it wouldn't work anyway. I guess im just going to look for a rsx wheel with a good airbag.
#83
I took some photos on interfacing CL’s cable reel to RSX's cruise control switch to retain its 5 functions. The pictures will show which wire needs to be spliced to which wire to retain all functions.
The combination below as posted by anthracitecl on 9/17/2012 was correct and it worked when I rigged up the wires:
CL clock spring---------------> RSX CC switch
#1 Green ---------------------> Black/Red
#2 Green ---------------------> Black/Orange
#3 Green ---------------------> Black/White
CL's cable reel
How the wires were interfaced during the trial.
Actual wiring before I secured a duct tape over the CL wire harness connector before taking it for a road test.
The combination below as posted by anthracitecl on 9/17/2012 was correct and it worked when I rigged up the wires:
CL clock spring---------------> RSX CC switch
#1 Green ---------------------> Black/Red
#2 Green ---------------------> Black/Orange
#3 Green ---------------------> Black/White
CL's cable reel
How the wires were interfaced during the trial.
Actual wiring before I secured a duct tape over the CL wire harness connector before taking it for a road test.
Thank You for this write up! My CC is finally working again, you've saved my life lol
#84
2003 CL
#85
2003 CL
Reposting due to Photobucket's GREED!
Not sure if anyone still comes here or not, but I'm annoyed that Photobucket wanted $399 to update my account. So, for that kind of highway robbery money, you'll never see a penny from me, photobucket!
I took some photos on interfacing CL’s cable reel to RSX's cruise control switch to retain its 5 functions. The pictures will show which wire needs to be spliced to which wire to retain all functions.
The combination below as posted by anthracitecl on 9/17/2012 was correct and it worked when I rigged up the wires:
CL clock spring---------------> RSX CC switch
#1 Green ---------------------> Black/Red
#2 Green ---------------------> Black/Orange
#3 Green ---------------------> Black/White
CL's cable reel
How the wires were interfaced during trial
Actual wiring before I secured a duct tape over the CL wire harness connector before taking it for a road test.
I took some photos on interfacing CL’s cable reel to RSX's cruise control switch to retain its 5 functions. The pictures will show which wire needs to be spliced to which wire to retain all functions.
The combination below as posted by anthracitecl on 9/17/2012 was correct and it worked when I rigged up the wires:
CL clock spring---------------> RSX CC switch
#1 Green ---------------------> Black/Red
#2 Green ---------------------> Black/Orange
#3 Green ---------------------> Black/White
CL's cable reel
How the wires were interfaced during trial
Actual wiring before I secured a duct tape over the CL wire harness connector before taking it for a road test.
Last edited by hotclick56; 07-20-2017 at 06:09 PM. Reason: improvements
Thread
Thread Starter
Forum
Replies
Last Post
rockyboy
2G RDX (2013-2018)
170
12-06-2022 02:29 PM