2nd Gen CL video thread
#161
Whats up with RDX owners?
iTrader: (9)
Valves are tricky beasts, a motor with 120k can be within spec while a motor with 12k can be way off. If you hear ticking from the valve train that usually indicates they are slightly out of spec. Mine were way out of spec and very loud, but since the rebuild theyve been perfectly silent.
Tarzan - Were you launching in second on the bike? I noticed the front end didnt lift at all, and it seemed like way too long of a gear to be in first. Looked good though
Tarzan - Were you launching in second on the bike? I noticed the front end didnt lift at all, and it seemed like way too long of a gear to be in first. Looked good though
#162
lowrd on tein CS biatch
iTrader: (2)
my motor had a tad bit of tapping coming from the valves, but it's quiet IMO. The purge solenoid is just as loud as the "ticking"
I dunno... for the money I dunno if it's worth all the hassle. If I knew they needed adjusting I'd be inclined to do so.
My car was driven in bumper to bump traffic for it's first 8 years/81000kms... so that could screw the valves up a bit I guess, right??
See my proble.. when its valves/lifters were screwed u heard them banging around, in comparison to my CL now it's like 4-5times quieter.
Car pulls very hard tho, and is very quiet all things considered... so I dunno how i'd tell if i need an adjustment
I dunno... for the money I dunno if it's worth all the hassle. If I knew they needed adjusting I'd be inclined to do so.
My car was driven in bumper to bump traffic for it's first 8 years/81000kms... so that could screw the valves up a bit I guess, right??
See my proble.. when its valves/lifters were screwed u heard them banging around, in comparison to my CL now it's like 4-5times quieter.
Car pulls very hard tho, and is very quiet all things considered... so I dunno how i'd tell if i need an adjustment
#163
thats not my bike, its my buddies. 05 R1 w/ full exhaust, power comm. and sprockets. i have another vid of him coming up on the launch. he ran a 9.96 when it was stock, but he said the gearing made it too short and it was impossible to keep the front down now w/o an extended swing arm. hes an amazing rider, .003-.005 r/t non-stop, but idk what he was launching at.
#165
Whats up with RDX owners?
iTrader: (9)
my motor had a tad bit of tapping coming from the valves, but it's quiet IMO. The purge solenoid is just as loud as the "ticking"
I dunno... for the money I dunno if it's worth all the hassle. If I knew they needed adjusting I'd be inclined to do so.
My car was driven in bumper to bump traffic for it's first 8 years/81000kms... so that could screw the valves up a bit I guess, right??
See my proble.. when its valves/lifters were screwed u heard them banging around, in comparison to my CL now it's like 4-5times quieter.
Car pulls very hard tho, and is very quiet all things considered... so I dunno how i'd tell if i need an adjustment
I dunno... for the money I dunno if it's worth all the hassle. If I knew they needed adjusting I'd be inclined to do so.
My car was driven in bumper to bump traffic for it's first 8 years/81000kms... so that could screw the valves up a bit I guess, right??
See my proble.. when its valves/lifters were screwed u heard them banging around, in comparison to my CL now it's like 4-5times quieter.
Car pulls very hard tho, and is very quiet all things considered... so I dunno how i'd tell if i need an adjustment
thats not my bike, its my buddies. 05 R1 w/ full exhaust, power comm. and sprockets. i have another vid of him coming up on the launch. he ran a 9.96 when it was stock, but he said the gearing made it too short and it was impossible to keep the front down now w/o an extended swing arm. hes an amazing rider, .003-.005 r/t non-stop, but idk what he was launching at.
I just finished most of my camera mount. I need to do a few little things to it before its ready for action. Hopefully by the end of the week.
#166
lowrd on tein CS biatch
iTrader: (2)
well my local mechanic (who's my buddy) works for my local DLR. and he does work on the side. and he even told me my car is mint and it's a waste of money pretty much.
if anything it's preventative maitenance, not gonna get me any HP.
lol.
I asked him if i'd gain hp and he laughed at me
if anything it's preventative maitenance, not gonna get me any HP.
lol.
I asked him if i'd gain hp and he laughed at me
#171
Whats up with RDX owners?
iTrader: (9)
Its supposed to dry up in a few days, so I can go out and make some videos
#173
Whats up with RDX owners?
iTrader: (9)
Posting from a phone?
#177
Racer
iTrader: (1)
yeah iam tryna get springs remove air box resonator bigger throttle body lighter rsx flywheels with stage 2 clutch i hate the way the honda one grabs when hard it feals so flimsy iam tryng to mount my camera from the dome light using the whole where the screw goes fabing up a camera stand
#178
Banned
iTrader: (1)
I'm going to make a 0-100mph video soon when i get headers.
This is what i have right now:
http://s146.photobucket.com/albums/r...7.flv&newest=1
This is what i have right now:
http://s146.photobucket.com/albums/r...7.flv&newest=1
Last edited by Jacobpockros; 02-15-2010 at 07:52 PM.
#179
Whats up with RDX owners?
iTrader: (9)
yeah iam tryna get springs remove air box resonator bigger throttle body lighter rsx flywheels with stage 2 clutch i hate the way the honda one grabs when hard it feals so flimsy iam tryng to mount my camera from the dome light using the whole where the screw goes fabing up a camera stand
Jacob - The car looks good. GET THOSE DAMN HEADERS ASAP!
#181
Whats up with RDX owners?
iTrader: (9)
Nice, should look good Jacob
#183
Whats up with RDX owners?
iTrader: (9)
I kid
#187
Whats up with RDX owners?
iTrader: (9)
WOAH! 54,650!!! Thats 53k less then my car lol
#188
G.uns O.n D.emand
iTrader: (1)
Join Date: Aug 2008
Location: STATEN ISLAND, N.Y.C.
Age: 43
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
car looks sweet jake...nice and clean...
do you have comptech axlebacks only? i wanna swap my exhaust but i don't want a loud annoying sound. from doing alot of research it seems comptech are the best for sound...no rice
do you have comptech axlebacks only? i wanna swap my exhaust but i don't want a loud annoying sound. from doing alot of research it seems comptech are the best for sound...no rice
#189
Whats up with RDX owners?
iTrader: (9)
The CTs are quiet until you get on it, then they liven up. But theyre nowhere near rice.
#191
G.uns O.n D.emand
iTrader: (1)
Join Date: Aug 2008
Location: STATEN ISLAND, N.Y.C.
Age: 43
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
thanks...i have been searching all over for comptech mufflers and headers...i found some new mufflers for like $500...so much money for comptech stuff..friggin headers are ridiculous too...i'm prob gonna go with dc ceramics...but i won't settle for anything less then comptech muffs
#192
Burning Brakes
iTrader: (1)
thanks...i have been searching all over for comptech mufflers and headers...i found some new mufflers for like $500...so much money for comptech stuff..friggin headers are ridiculous too...i'm prob gonna go with dc ceramics...but i won't settle for anything less then comptech muffs
#193
Whats up with RDX owners?
iTrader: (9)
But the Magnaflows are louder.
#194
G.uns O.n D.emand
iTrader: (1)
Join Date: Aug 2008
Location: STATEN ISLAND, N.Y.C.
Age: 43
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
although might be interesting to hear magnaflows with stock tips..
+1 too loud
#197
#198
3.7L Nitrous Breathing CL
iTrader: (7)
Adding this guy's hydro set up because it looks sick slamed draging.
And the dog wheeling/3 wheeling is pimp'n.
http://www.youtube.com/watch?v=ZsFW5FKUnKg
And the dog wheeling/3 wheeling is pimp'n.
http://www.youtube.com/watch?v=ZsFW5FKUnKg
#200
Whats up with RDX owners?
iTrader: (9)
Uh, is teh CLs post screwed up for anyone else?