Reference: Honda/Acura J30AC (TLX and MDX Type S) Engine Cutaways
09-02-2022 | 09:58 PM
#1
Thread Starter
Intermediate
Joined: Nov 2021
Posts: 25
Likes: 54
Reference: J30AC (TLX and MDX Type S) Engine Cutaway and Behind the Scenes Production
Was searching for additional information on the J30AC (TLX and MDX Type S engine), and pulled some noteworthy screen grabs from these two videos below that either showed cutways or behind the scenes production of Honda's 355 HP 3.0 TGDI engine:
Last edited by praecisiovectura; 09-02-2022 at 10:08 PM.
The following 8 users liked this post by praecisiovectura:
bilirubin (09-07-2022),
Carlson_TS (02-15-2023),
FckFiat (09-08-2022),
Hexaform (09-11-2022),
KidK (09-08-2022),
and 3 others liked this post.
The following users liked this post:
FckFiat (09-08-2022)
. Looking to see if they have cutaways for the 4-banger as well.
09-09-2022 | 10:00 PM
#4
Thread Starter
Intermediate
Joined: Nov 2021
Posts: 25
Likes: 54
For cross reference, here's a link to the K20 series, C1 is for the CTR, C4 is the Accord 2.0T and for the TLX it's a C6. There's quite a few differences between the C1 (CTR) v. C4/C6 in the Accord, TLX and RDX. I believe the only differences between the C4 and C6 is just the engine mount, otherwise everything is identifical.
https://acurazine.com/forums/second-...-views-997821/
https://acurazine.com/forums/second-...-views-997821/
Thread
Thread Starter
Forum
Replies
Last Post
praecisiovectura
6G TLX (2021+)
8
03-08-2022 12:37 AM
praecisiovectura
6G TLX (2021+)
7
03-03-2022 11:48 AM
GhostTL09
6G TLX Photograph Gallery
3
07-07-2021 09:34 PM