AcuraZine - Acura Enthusiast Community

AcuraZine - Acura Enthusiast Community (https://acurazine.com/forums/)
-   4G TL Tires, Wheels & Suspension (https://acurazine.com/forums/4g-tl-tires-wheels-suspension-298/)
-   -   instructions to relocate rear bumper tab? (https://acurazine.com/forums/4g-tl-tires-wheels-suspension-298/instructions-relocate-rear-bumper-tab-943016/)

RDXtremist 03-12-2016 07:36 AM

instructions to relocate rear bumper tab?
 
hello 4G fam,

I've seen people mention doing it but would appreciate if someone can share the instructions or give a few pointers. I recently installed my wheels and the rear tires are hitting the tabs when the car bounces, so i guess it's time to perform this minor body surgery.

thanks in advance and grateful for any advice.

https://cimg5.ibsrv.net/gimg/acurazi...20e6d3e6b0.jpg


https://cimg9.ibsrv.net/gimg/acurazi...a918b1d76a.jpg

jtech316 03-19-2016 09:02 PM

I read that some people shave it and some people relocate the tabs. Here's the thread that I remember reading it at. https://acurazine.com/forums/tires-w...r-tabs-912245/


Originally Posted by RDXtremist (Post 15702116)
hello 4G fam,

I've seen people mention doing it but would appreciate if someone can share the instructions or give a few pointers. I recently installed my wheels and the rear tires are hitting the tabs when the car bounces, so i guess it's time to perform this minor body surgery.

thanks in advance and grateful for any advice.


RDXtremist 03-20-2016 03:21 PM


Originally Posted by jtech316 (Post 15707047)
I read that some people shave it and some people relocate the tabs. Here's the thread that I remember reading it at. https://acurazine.com/forums/tires-w...r-tabs-912245/

many thanks! i managed to shave off the rear tabs as much as i can and it appears the rear tires are no longer hitting them. fingers crossed.

omgitsspooky 04-21-2017 09:41 PM

Do you have pictures? I'm confused. I didn't realize the tab was L shaped. Did you trim the side that's going down?

Soal Man 04-21-2017 11:22 PM


Originally Posted by omgitsspooky (Post 16003814)
Do you have pictures? I'm confused. I didn't realize the tab was L shaped. Did you trim the side that's going down?

Your best bet is to shave it down without messing with the covers. Just get it down close to the screws without modifying/damaging anything else besides the tab. Judging from your stance you'll be fine from just shaving the tabs without relocating them elsewhere. Just look at the post that jtech posted and you'll get a better understanding of it.


All times are GMT -5. The time now is 04:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands