Dopeboy1's CBP SH-AWD Progress Report
Figured id start a progress thread too since lots of people on here have some really cool whips. I really like seeing the transformation that some rides have taken and I imagine mine will take one as well... got a lot of plans and hope I can get there one day. I would really appreciate opinions or any commentary. Also want to be straight up about how much these mods cost me. So I bought it at an online auction in late February of 2017, 2012 TL SH-AWD tech and this is how it looked when it arrived.
https://cimg0.ibsrv.net/gimg/acurazi...3e96370aba.jpg https://cimg2.ibsrv.net/gimg/acurazi...3019c776bd.jpg First up I got the front windows tinted to match the rest and the same place wrapped the grill and chrome trim under the trunk. Cost $250 https://cimg0.ibsrv.net/gimg/acurazi...9d74234c2b.jpg https://cimg1.ibsrv.net/gimg/acurazi...e38575e630.jpg |
Rear window lip. Cost $70 plus 16.50 duty charge.
https://cimg7.ibsrv.net/gimg/acurazi...ab4e8586c3.jpg The passenger mirror glass had a small brown streak at the bottom. Not really noticeable unless you looked closely but it wasn't perfect so I replaced it. Cost $65. Replaced it myself and found how to here https://acurazine.com/forums/fourth-...-10-tl-942362/ Was really easy after seeing that. The replacement mirror didn't really seem compatible with being a heated mirror but I peeled the layer with the heating element off the old glass and stuck it to the back of the new glass anyways. Below is a picture of the old glass with the brown streak at the bottom, seemed to me the brown was in the layer between the back of the glass and the heating element. It spent 4 winters in the Montreal area though so I bet they got used a lot. https://cimg4.ibsrv.net/gimg/acurazi...2b4680114a.jpg Below is the new glass installed. https://cimg5.ibsrv.net/gimg/acurazi...b3b19196b9.jpg |
The car came with winter tires on the stock rims so when hotter weather came I had to make a decision. I do plan on getting proper rims for it in the future hopefully next summer. This will give me time to decide what rims I want to get. In the interim these rims were sitting in my shed from my old car so the cost is zero and since they fit...........
https://cimg9.ibsrv.net/gimg/acurazi...8b4bf10cd4.jpg https://cimg3.ibsrv.net/gimg/acurazi...f61f14bd55.jpg |
Quad Exhaust tips. Cost 170 + 60 shipping + 60 for install.
https://cimg4.ibsrv.net/gimg/acurazi...e58f5ca030.jpg https://cimg5.ibsrv.net/gimg/acurazi...28018db864.jpg |
love the kit.. no sure about these wheels tho.
|
Awesome dude!
Quite the gamble to get it from an online auction, but damn it looks like it paid off getting the kit with it! Looking forward to seeing more as I push through with my own TL :thumbsup: |
chose some funky looking wheels, but if you dig it, i dig it :thumbsup:
|
lol i didn't think people would be feelin the rims but they will have to do for this summer. Got too much going on to contemplate new rims right now, next summer I will for sure.
As far as the auction I was told the key to getting a good car was (among other things) to only bid on the cars with the highest possible overall rating by the auction company. My car was rated a 4.4 out of 5.0 which was the highest overall rating for any 2012-14 TL SH-AWD up for auction that week. Out of all the cars I was going to bid on that week this one came up first and I got it for less than my max. I think I bought at the right time and got a bit lucky. So what's up next are some LED upgrades. I have here reverse lights, license plate lights, daytime running lights, fog lights, turn signals, switchbacks and resistors for the switchbacks. The LEDs that came in the LITECH packages are already installed, their packages in the picture have the stock bulbs in them. The rest I plan to put in this weekend, will post some pics when there in. Total cost about $250 https://cimg1.ibsrv.net/gimg/acurazi...9a9d24ede2.jpg |
interesting tip on the auction! now to get my dealers license
|
The lights are in! I'm really happy with them they look cool and seem really bright. The install was easy after researching how to get at the fogs/turn signals and how to install resisters. I drove the front of the car on ramps and went from underneath. The hardest part was getting off a couple of seized bolts. Heres some pics of the fogs/switchbacks.
https://cimg6.ibsrv.net/gimg/acurazi...6f1c053bf0.jpg https://cimg7.ibsrv.net/gimg/acurazi...4a95256ca7.jpg https://cimg8.ibsrv.net/gimg/acurazi...20e5ef9b5e.jpg https://cimg0.ibsrv.net/gimg/acurazi...964de2dabd.jpg |
This is a pic of the daytime running lights which came in the ijdmtoy box and below it a pic of what I am planning to do next. Red tint for the taillights and fishing line to debadge the trunk. I am removing the 'ACURA' and the 'TL', after much deliberation ill probably keep the 'SH-AWD'. The tint is about 35 and the fishing line 5.
https://cimg8.ibsrv.net/gimg/acurazi...d998c67c03.jpg https://cimg1.ibsrv.net/gimg/acurazi...1edb265024.jpg |
Well the trunk is debadged but the tail lights are not tinted yet. After heating up the letters and getting the fishing line behind them the badges came off really easily. Unfortunately almost none of the adhesive came off with the letters, it was all still stuck to the car. Took a lot of heat and effort to get it all off and then a little polish to clean the area up. Before the polish the outline of the letters was very clearly visible. The taillight tints I am hoping to get to soon.
https://cimg7.ibsrv.net/gimg/acurazi...7ee6088cf0.jpg |
Finally got something other than driveway pics while waiting for a bridge. I really think the car is itchin to go lower. Last minute switch up I decided black tint would look better with a black car. Though I really like the red, I have ordered some medium smoke tint.
https://cimg3.ibsrv.net/gimg/acurazi...dae6dfe1a7.jpg https://cimg4.ibsrv.net/gimg/acurazi...c88ba532d8.jpg https://cimg5.ibsrv.net/gimg/acurazi...5f9ac9dd20.jpg |
Had some time to work on the TL so I decided to paint the calipers. They were really ugly lookin before. I bought one of those caliper painting kits for 30 bucks. I didn't have time to do the hubs but with my current rims you really cant see the hubs and I can always paint them later.
https://cimg2.ibsrv.net/gimg/acurazi...c3f0f85cc0.jpg https://cimg6.ibsrv.net/gimg/acurazi...defb59da0e.jpg https://cimg5.ibsrv.net/gimg/acurazi...0abf0e0daf.jpg https://cimg5.ibsrv.net/gimg/acurazi...a194e1f394.jpg |
Tein street advance coilovers just came in. They were on backorder so I had to wait a while... ordered them almost exactly a month ago. After asking around I found someone who is going to install them and do a 4 wheel alignment for $250. The coilovers cost $995 all in. The exchange rate really drove that number up.
https://cimg6.ibsrv.net/gimg/acurazi...07ae19b376.jpg |
I've got some stuff done since my last post. I put on the wellvisers (140 cad) and tinted the rear reflectors. I did try to tint the taillights but I couldn't get it to be perfect... its more difficult than I thought it would be but I've got a plan to tint them eventually. Also been messing around with tint on the fog lights, I like the blue for the moment. Oh and of course the Tein Street advance coil overs are on! I told the people who installed them to set it to the recommended settings from Tein. I have to say it drives so so so nice. I understand the recommended stiffness is on the softer side and wow is it smooth. Its like driving on a cloud. Could not be happier with the coils. If anyone could help me understand what I need to fix the camber issue I have posted the alignment report in the link below thanks!
https://acurazine.com/forums/4g-tl-t.../#post16069835 https://cimg9.ibsrv.net/gimg/acurazi...70e2e4ca1f.jpg https://cimg3.ibsrv.net/gimg/acurazi...5fe0db0ba1.jpg https://cimg6.ibsrv.net/gimg/acurazi...fc02568f68.jpg https://cimg7.ibsrv.net/gimg/acurazi...3b459b819e.jpg https://cimg8.ibsrv.net/gimg/acurazi...12d6012c83.jpg https://cimg8.ibsrv.net/gimg/acurazi...90f71744f7.jpg |
Looks good. Keep up the progress! Wheels don't look too bad with the drop. Just never a fan of all chrome wheels. I know it's only temporary for you though.
|
Hey thanks for the reply teamacura, yeah I think the drop has helped the look a lot. Now the long process of figuring out what rims to get can begin.
|
The cloudiness of my headlights really jumped out at me one day. After seeing some before and after's on here I decided to do a little work on mine. I think the before and after's speak for themselves.
before https://cimg5.ibsrv.net/gimg/acurazi...7623ebca67.jpg before https://cimg3.ibsrv.net/gimg/acurazi...5b6ea51d5f.jpg after https://cimg8.ibsrv.net/gimg/acurazi...57be866230.jpg after https://cimg7.ibsrv.net/gimg/acurazi...758cbe1262.jpg passenger side after driver side before https://cimg9.ibsrv.net/gimg/acurazi...fd15ec25fd.jpg |
I did the turn signals the same as the headlights. First pic is a before and after next two pics are the end result. What a difference it makes.
passenger side after driver side before https://cimg3.ibsrv.net/gimg/acurazi...1bca742730.jpg done https://cimg4.ibsrv.net/gimg/acurazi...1d82ee8602.jpg done https://cimg5.ibsrv.net/gimg/acurazi...a772280e59.jpg |
Great idea with the turn signals - didn't even think about how those could be messed up!
It's really amazing how big a difference it actually makes - you don't really know until you've done them |
Would have never thought to do the turn signals, but I can definitely see a huge improvement. Nicely done!
|
Originally Posted by dopeboy1
(Post 16039822)
So what's up next are some LED upgrades. I have here reverse lights, license plate lights, daytime running lights, fog lights, turn signals, switchbacks and resistors for the switchbacks.
https://cimg1.ibsrv.net/gimg/acurazi...9a9d24ede2.jpg |
The led switchbacks I bought are these ones here
You also need to get resisters for them to prevent hyper flash and they are here |
Good lookin out. Much appreciated. Those are the set I have sitting in my Amazon cart right now. haha
|
you should probably clear coat them with 2k clear so it doesnt haze again.
|
you should probably clear coat them with 2k clear so it doesnt haze again. Great idea with the turn signals - didn't even think about how those could be messed up! It's really amazing how big a difference it actually makes - you don't really know until you've done them Would have never thought to do the turn signals, but I can definitely see a huge improvement. Nicely done! before https://cimg2.ibsrv.net/gimg/acurazi...ae904af8cd.jpg after https://cimg3.ibsrv.net/gimg/acurazi...ae0d6258e0.jpg |
Beautiful, but have subjective taste on rims
|
Beautiful, but have subjective taste on rims https://cimg1.ibsrv.net/gimg/acurazi...2f1bffaa1d.jpg https://cimg2.ibsrv.net/gimg/acurazi...bf64c1734c.jpg https://cimg8.ibsrv.net/gimg/acurazi...f23c8cedb2.jpg https://cimg9.ibsrv.net/gimg/acurazi...b71c7d97d3.jpg https://cimg0.ibsrv.net/gimg/acurazi...21a46a484e.jpg https://cimg3.ibsrv.net/gimg/acurazi...a91d0bdf85.jpg https://cimg4.ibsrv.net/gimg/acurazi...f3f70f3015.jpg These TSW's were actually for sale on the acurazine black market. After realizing the seller wasn't very far away from me I jumped on them. Got a hell of a deal, the rims are like new, the tires are like new, they have tpms installed. Can hardly believe the deal I got on them. The tpms synced up the second time I started the car. The painted calipers and rotors are really payin off now! I also put onto the calipers some high temp acura decals. The only issue is that the rims are 20x9.5 and the tires are 255/35/20 so the backs do rub when going over decent size bumps. Im going to look into getting the fenders rolled. |
I figured that tire size on the rim would be pushing it. Glad you like them, start with the rolled fenders and if not enough run slight camber.
|
Car looks a million times better with those wheels. Nice.
|
Originally Posted by Mickman
(Post 16088847)
Car looks a million times better with those wheels. Nice.
|
Good looking car!
:canada: |
Yeah the rims are working out well but, I'm still trying to find somewhere to roll my fenders. I added the rear diffuser. Its the same one that is on here and done by a some others. Really wanted to see it on a black car. Also freshly cleaned rims and tires.
https://cimg5.ibsrv.net/gimg/acurazi...3c4734cac6.jpg https://cimg6.ibsrv.net/gimg/acurazi...ee6007ef85.jpg https://cimg7.ibsrv.net/gimg/acurazi...8ae285dfba.jpg https://cimg8.ibsrv.net/gimg/acurazi...811f052062.jpg https://cimg9.ibsrv.net/gimg/acurazi...062c4f442e.jpg |
Dopeboy, the wheels look awesome. Glad you got a good deal on them. Think you may need to trim the rear tabs in the rear to address the rubbing. Fender roll may not be necessary yet looking at your pics.
|
Think you may need to trim the rear tabs in the rear to address the rubbing. Fender roll may not be necessary yet looking at your pics. |
Originally Posted by dopeboy1
(Post 16092110)
Hey thanks man im not having much luck on rolling the fenders, other than doing it myself. It would be great if I didn't have to but what exactly do you mean by trim the rear tabs, can you explain a little further?
|
Rear diffuser looks good on black.
|
Rear diffuser looks good on black |
Originally Posted by dopeboy1
(Post 16094396)
Thanks for that link it explains everything. I took a look at it and im really not sure if its rubbing on that tab or the edge of the fender. Anyways ill shave that tab first and see if that helps.
I was hoping it would. I really like how well it fits with a little modification. Also love your avatar carbontsex, its so g! |
All times are GMT -5. The time now is 09:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands