Xxr 530
#2681
Racer
iTrader: (1)
The one in the picture is the 18x8.75 +20mm rim.
I did like 10 weight measurements it varied from 21.2-21.4lbs
also moved the scaled to the Flattest area I could find.
At the end 21.4lbs was the number I kept getting.
Not bad considering other wheels I weights like 17" Type S at 25lbs and Type S replicas at 29lbs
I did like 10 weight measurements it varied from 21.2-21.4lbs
also moved the scaled to the Flattest area I could find.
At the end 21.4lbs was the number I kept getting.
Not bad considering other wheels I weights like 17" Type S at 25lbs and Type S replicas at 29lbs
#2682
Acura TL 2005 x xxr 530
I have an Acura TL 05 stock Ake really want the 530 xxr wheels but I’m to much of a wheel/tire person so I don’t real know which one would fit perfect on 05 Tl’s if anyone is still in the thread please help.
#2684
Suzuka Master
Public Service Announcement!
So I just hit something pretty good and my 530 has a crack in it and is loosing pressure slowly. I contacted a wheel repair place and they want $285 to true, repair and refinish the wheel!
I contacted the seller where I purchased my wheels and unfortunately they do not have any more of the 5 hole drilled wheels in my finish so I am going to replace one of my wheels with one of the 10 hole Chromium Black universal wheels........YUCKO but whatever.
But if anyone is looking for rare 5 hole drilled wheels they have many still available but they are in flat back finish.
I really held out a long time to get the 5 hole wheels originally as they look so much better.
So if your looking for 5 hole wheels in flat black, 18 x 8.75 33 offset I would contact Jason at SGMotoring 909-989-1807 and tell em John sent ya! Only place I know of that special ordered 5 hole drilled wheels.
So I just hit something pretty good and my 530 has a crack in it and is loosing pressure slowly. I contacted a wheel repair place and they want $285 to true, repair and refinish the wheel!
I contacted the seller where I purchased my wheels and unfortunately they do not have any more of the 5 hole drilled wheels in my finish so I am going to replace one of my wheels with one of the 10 hole Chromium Black universal wheels........YUCKO but whatever.
But if anyone is looking for rare 5 hole drilled wheels they have many still available but they are in flat back finish.
I really held out a long time to get the 5 hole wheels originally as they look so much better.
So if your looking for 5 hole wheels in flat black, 18 x 8.75 33 offset I would contact Jason at SGMotoring 909-989-1807 and tell em John sent ya! Only place I know of that special ordered 5 hole drilled wheels.
#2685
I hate to be the to revive an old thread, but I'm thinking of getting these wheels in 18x8.75 +20. The only thing I'm concerned about is that actual handling and ride quality of a 225/40 vs 235/40. Naturally, I'd prefer the 235, but as everyone is saying, I'd run into issues with that. But I also don't want to lose performance by going to a smaller wheel. Is the difference in handling noticeably different for the two sizes?
#2686
Cablevision Employee
There is a difference, The bigger wheel grips harder for sure, especially on corners. I had both on my car and made the adjustment for the 235
The following 2 users liked this post by robbie82:
David_BNSF (03-26-2023),
SSDarkside (07-15-2022)
#2687
Thread
Thread Starter
Forum
Replies
Last Post