AckTL05

iTrader: (18)

I am looking at tenzo r type m rims (18x8) for my car. Would this fit brembos?

nikoatx

Just got mine and they dont fit

AMUA6

iTrader: (7)

Spacers?

nikoatx

I just posted in another thread, I want to do that but am a little worried about the consequences. Any thoughts on that?

myron

iTrader: (4)

where do people get this idea that spacers will destroy your car. I have had mine for a year and put about 30 000km on the car with them on and not a single problem. I make sure they are tight, and once every 2-3 months I double check their tightness. I haven't had a single problem with spacers.

nikoatx

awesome, that's what I wanted to know. Thanks man, what size spacers?

myron

iTrader: (4)

whats the offset of the wheels? most probably around 10mm

nikoatx

45. Bryan had these same wheels, the guy who sold his TL-S and had 1/4" spacers on the front. I am going to try that and see what happens. thanks again

myron

iTrader: (4)

you should get spacers in the back too then, and thicker than the front. Or it's gonna look funny. 18x8+45? get 15mm in the front and 20mm in the back. you can get spacers with pressed in studs so you don't have to change out your stock studs with longer ones.

nikoatx

19 x 8.5 + 45
I dont think I need that much, the wheel just barley hits the brembro's. 5mm would give me plenty clearence. I see what you mean though, might as well space them all out the same.

nikoatx

5mm worked! thanks!

Valliyappan

iTrader: (1)

Did you do 5mm all around or a different space size in the back? Any issues with them so far?

07tl-s6spd

iTrader: (1)

yea there is nothing wrong with spacers....ive had mine for months noe and no issues at all they are 15mm