phee

iTrader: (5)

as a rule of thumb.

in reference to 19x8 racing hart j5 +32 et

libert69

iTrader: (7)

What bbk? I have wilwoods and my previous wheels were 18x8.5 +45 and I needed a 10mm spacer to fit. I have also been told that wilwoods are wider then the other bbk's

Now I have 18x8.5 +30 NO spacer and there is plenty of room

j1n

iTrader: (1)

not sure but im runnin 19x8.5 +35 with a 3mm spacer

jray906

iTrader: (1)

I have 18X8.5 +41 on my TL-s, still have a lot of room for the front like at least 1CM space between the bbk and wheels.

pearlite TL

iTrader: (1)

I have a 19x9.5 with a 30 offset... im guessing its what disk you will be running cause i had to run a 0 disk to clear mine.... r disk would never have cleared..

Turbonut

iTrader: (1)

I would think it would be determined by the design of the "spokes", rather than the offset of the flange. If the spokes were of a heavy design, or turned inwards as they went towards the outer part of the wheel the offset would be different from what I might say a conventional design.

pearlite TL

iTrader: (1)

Does determine the wheel design but you can always get the same design and run a diff disk and be good to go

D-MacTL

iTrader: (2)

Can I fit a Rotora BBK on the TL 04 - 06 OEM Rims?

libert69

iTrader: (7)

^yes