Linea Corse Wheels
08-12-2008, 06:25 PM
#1
Type- (S)low
Thread Starter
Linea Corse Wheels
I'm looking into these Replica LM's (Lemans) , Z2S , Strasse.
I emailed them , but so far no one from Azine sport these wheels, the E92 guys are sporting them on their cars.
Email their customer service today , he said he hasn't sold it to any Acura TL , but he'll get his friends's friends to test fit.
Open to suggestions on fitments ,quality, etc.
I emailed them , but so far no one from Azine sport these wheels, the E92 guys are sporting them on their cars.
Email their customer service today , he said he hasn't sold it to any Acura TL , but he'll get his friends's friends to test fit.
Open to suggestions on fitments ,quality, etc.
08-12-2008, 06:43 PM
#2
That's Racist
Join Date: Aug 2004
Location: San Diego native. UCLA resident. =)
Age: 38
Posts: 5,634
Likes: 0
Received 0 Likes
on
0 Posts
i've seen a lot of people run the bbs reps on bimmer forums. they look pretty solid; the real BBS LM's definitely look good on 3rd gen TL's. search: blackberryle (sp?)
08-12-2008, 09:22 PM
#3
Type- (S)low
Thread Starter
Originally Posted by Time For Sleeep
i've seen a lot of people run the bbs reps on bimmer forums. they look pretty solid; the real BBS LM's definitely look good on 3rd gen TL's. search: blackberryle (sp?)
I just wanted to know if anyone running these particular brand.
I might be first.
08-12-2008, 11:12 PM
#5
Type- (S)low
Thread Starter
Originally Posted by CF21TL-S
I almost positive the LM reps aren't offered in our bolt pattern.
Doesn't IS has same bolt pattern as TL??
Correct me if I'm wrong.
Trending Topics
08-13-2008, 02:57 AM
#9
My Garage not
iTrader: (2)
Join Date: Jun 2006
Location: Westsiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiide
Posts: 2,121
Likes: 0
Received 4 Likes
on
1 Post
nevermind, i found it. a little less than 25 pounds for the fronts and a little more than 25 pounds for the rears, but i don't know if they offer these in a non-staggered set??
08-13-2008, 04:01 AM
#10
Instructor
iTrader: (3)
Join Date: May 2007
Location: SF
Age: 43
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 808nighthawkua6
Niice! What's the price per wheel in 19x10?"
Front: 19x8.5 - +38mm offset
Rear: 19x10 - +43mm offset
One more pic:
08-13-2008, 06:30 AM
#11
Type- (S)low
Thread Starter
I know these wheels will get you guys's attention.
Inexpensive / Stylish = make much sense. Now we just need some Local CA resident to do a test fit.
Inexpensive / Stylish = make much sense. Now we just need some Local CA resident to do a test fit.
08-13-2008, 06:41 AM
#12
Type- (S)low
Thread Starter
Fyi:
If someone With TL-s who lives near Fremont, CA is willing to test fit these wheels. Please contact Zoeb.
AIM: DaWheelDude Phone: 877.DUDE-555 Email: Sales@WheelDude.com
He's willing to let us do this.
AIM: DaWheelDude Phone: 877.DUDE-555 Email: Sales@WheelDude.com
He's willing to let us do this.
08-13-2008, 09:47 AM
#13
Stand For Something
Originally Posted by Paul_2007S
Doesn't IS has same bolt pattern as TL??
Correct me if I'm wrong.
Correct me if I'm wrong.
08-13-2008, 12:11 PM
#14
My Garage not
iTrader: (2)
Join Date: Jun 2006
Location: Westsiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiide
Posts: 2,121
Likes: 0
Received 4 Likes
on
1 Post
anyone know if it comes non-staggered? it looks like it'll fit a tl, but with the flat face spoke design i'm kinda doubtful it'll clear the acura bbk...although not like that affects me at all. with the 10's in the back we'll need some fender rolling.
08-13-2008, 02:16 PM
#15
Type- (S)low
Thread Starter
Originally Posted by wasupdog
anyone know if it comes non-staggered? it looks like it'll fit a tl, but with the flat face spoke design i'm kinda doubtful it'll clear the acura bbk...although not like that affects me at all. with the 10's in the back we'll need some fender rolling.
08-13-2008, 03:17 PM
#17
Type- (S)low
Thread Starter
Good news for some.
Email Zoeb again today and got some more info for those interested.
His reply was
"If 3 people or more are interested, he'll make them for us in hyper silver with polished lip for $1249 shipped. He'd need a $200 deposit up front and $1049 when the wheels are ready to ship. It will take about 2-3 months, but he'll do all the R&D as to what offset is needed in order to have them clear without having to use spacers on the car. a Non-Staggered, 19x8.5 all around setup is not a problem. If we wanted 19x9.5 all around he can do that as well, but it would be $1349 for the set if we did that, however people might have clearance issues with that as the offset will have to be pretty low to clear the calipers and with a 9.5" wide wheel, it may stick out too much"
I have nada to do with the sellers, not getting any commissions, I just want to contribute for those who have challanges with fitments from BBK.
His reply was
"If 3 people or more are interested, he'll make them for us in hyper silver with polished lip for $1249 shipped. He'd need a $200 deposit up front and $1049 when the wheels are ready to ship. It will take about 2-3 months, but he'll do all the R&D as to what offset is needed in order to have them clear without having to use spacers on the car. a Non-Staggered, 19x8.5 all around setup is not a problem. If we wanted 19x9.5 all around he can do that as well, but it would be $1349 for the set if we did that, however people might have clearance issues with that as the offset will have to be pretty low to clear the calipers and with a 9.5" wide wheel, it may stick out too much"
I have nada to do with the sellers, not getting any commissions, I just want to contribute for those who have challanges with fitments from BBK.
08-13-2008, 11:49 PM
#20
Type- (S)low
Thread Starter
Originally Posted by 808nighthawkua6
Nice find Paul_2007S! Let's see.....Linea Corse for $1249, or BBS for $4000. No brainer there! For 4 grand, I can these wheels and tires, I.C.E., and suspension!
Hopefully someone will jump on these soon. I'm still broke.
08-14-2008, 03:31 PM
#22
Type- (S)low
Thread Starter
List?
Originally Posted by CF21TL-S
Im definitely interested in the LM reps.
You want to be the first on the list? If yes , start with your name and a #1.
08-14-2008, 04:21 PM
#24
Type- (S)low
Thread Starter
Originally Posted by aznbo187
Too bad he's in Fremont. I've been interested in these wheels for a long, long time!
You don't think you can generate some vendor to vendor deals?
08-18-2008, 11:46 PM
#25
Stand For Something
I also contacted wheeldude.com and asked if they could custom make a set that are 19x8.5 all around with a +42 offset, they said they could do it as long as 3 people are going to buy them. However they also said that the only problem would be that they have no way of knowing if the rims will clear the OEM BBK. Sooo we need someone near Fremont to go test fit a set!!!
but im in orlando and cant test fit..
08-20-2008, 09:02 PM
#28
If someone With TL-s who lives near Fremont, CA is willing to test fit these wheels. Please contact Zoeb.
AIM: DaWheelDude Phone: 877.DUDE-555 Email: Sales@WheelDude.com
He's willing to let us do this.
AIM: DaWheelDude Phone: 877.DUDE-555 Email: Sales@WheelDude.com
He's willing to let us do this.
Hmm, i actually know of this guy. He used to come out the to milpitas meet, but never got a chance to talk to him. I will test fit for u guy =)
Zoeb with the blue 335i right? wheeldude..
My cousin is actually really good friends with one of the workers there. My other buddy with an e46 was about to get these but ended up for BBS CH's since my other buddy was sellin them for cheap!
Thread
Thread Starter
Forum
Replies
Last Post
JByron
Car Parts for Sale
7
01-08-2016 09:49 PM
