Help me find black 19" wheels with rivets
#1
Anthracite,Carmel,6MT
Thread Starter
Join Date: May 2004
Location: Las Vegas
Age: 59
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Help me find black 19" wheels with rivets
If anyone knows of any wheels that are black with a silver lip and has rivets in size 19s...oh they have to fit onver brembos too. Please let me know.
Please Help Me........
Please Help Me........
#2
http://mackinindustries.com/md/rays/volk.html
check there....volks are the way to go for rims. But if they are too pricey then you can look here also.
http://dazzmotorsports.com/wheels_rac.asp
racing harts are not bad for the money either just not as well made as volks.
check there....volks are the way to go for rims. But if they are too pricey then you can look here also.
http://dazzmotorsports.com/wheels_rac.asp
racing harts are not bad for the money either just not as well made as volks.
#3
Heres more to look at
www.wheelwarehouse.com
SouthBay Acura ask for Kai in parts
310-539-3636
www.importhookups.com
http://www.visracing.com/catalog/con...9c0a4add4091e1
they sell bodykits but I believe they sell rims also. Just remember if you buy volks that the wait time is 4-6 months depending on what you order. Good luck.
www.wheelwarehouse.com
SouthBay Acura ask for Kai in parts
310-539-3636
www.importhookups.com
http://www.visracing.com/catalog/con...9c0a4add4091e1
they sell bodykits but I believe they sell rims also. Just remember if you buy volks that the wait time is 4-6 months depending on what you order. Good luck.
#4
wiz, there should be a ton of those.. it all depends on how much you want to spend and if you want 2 piece with fake rivets or a 3 pc wheel which may run you a couple hundred more.
For the color you want, I would say go for the the DPE's in the brushed dark color they offer. It looks so nice compared to a regular black.
For the color you want, I would say go for the the DPE's in the brushed dark color they offer. It looks so nice compared to a regular black.
#6
Damn now thats HOTTTTT....I wanna say thats a Flat black finish, but it has a greyish tint to them...maybe flat gunmetal...I dont even know if that exsists.....Yet? THe porches wheels have more of a glossy (normal) finish.
Trending Topics
#10
Anthracite,Carmel,6MT
Thread Starter
Join Date: May 2004
Location: Las Vegas
Age: 59
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Thanks everyone for your help.
The HPE wheels are great but damn they cost a lot.
I am looking into the DPE wheels.
I may get the 2P wheels from iforged for $2400. in black with rivets.
The HPE wheels are great but damn they cost a lot.
I am looking into the DPE wheels.
I may get the 2P wheels from iforged for $2400. in black with rivets.
#11
Originally Posted by wizlb
Thanks everyone for your help.
The HPE wheels are great but damn they cost a lot.
I am looking into the DPE wheels.
I may get the 2P wheels from iforged for $2400. in black with rivets.
The HPE wheels are great but damn they cost a lot.
I am looking into the DPE wheels.
I may get the 2P wheels from iforged for $2400. in black with rivets.
I have been reading a lot of complaints from the HRE side too. Those who are hardcore and race their cars say they have broken theirs. The HRE's front face is the only thing that is forged (this is hear say from 6speedonline.com). A lot of people have been backing up Iforged lately and noticed that most lambopower.com (lamborghini's) users are riding on Iforged. One of the guys who said he knows the back end of these business's sees HRE's break all the time and for the Iforged line, none. Makes you wonder! I have the link on my other computer if you want to read it. One of Vincent Wong's arguments towards copying others when he was confronted about it was that he asked.. "How many ways can you create a 5 spoke wheel?". There isnt much and there are tons of other wheel manufacturers who have 5 spoke too.
They also say that HRE has better service, but still not as great as Kinesis. As for Iforged, good luck getting any service, but for the price you get them, you can easily replace one wheel. HRE, DPE & Iforged are all made the same way supposedly, but not from the same place.
#12
Here you go...
http://www.6speedonline.com/forums/s...5&pagenumber=2
extracted:
some have a mob mentality and a snob mentality which leads them to make such comments. I have a strong background working behind the scenes in the aftermarket industry that I laugh when people jump on the hate bandwagon. If some of you only knew the truth about HRE's. one may find out they are far from tip top of quality. Just because a rim may be priced slightly higher than it's competition does not always mean it's better.
I wouldn't buy HRE's cause iv'e seen more than a few sets crack. Iforge I have never heard of or seen this happen, so to me HRE's are beneath Iforged. However, I would never comment in that type of way to someone directly, especially the way this car is put together it gets nothing but 100% respect from me.
__________________
996 Twin Turbo w/ mods
http://www.6speedonline.com/forums/s...5&pagenumber=2
extracted:
some have a mob mentality and a snob mentality which leads them to make such comments. I have a strong background working behind the scenes in the aftermarket industry that I laugh when people jump on the hate bandwagon. If some of you only knew the truth about HRE's. one may find out they are far from tip top of quality. Just because a rim may be priced slightly higher than it's competition does not always mean it's better.
I wouldn't buy HRE's cause iv'e seen more than a few sets crack. Iforge I have never heard of or seen this happen, so to me HRE's are beneath Iforged. However, I would never comment in that type of way to someone directly, especially the way this car is put together it gets nothing but 100% respect from me.
__________________
996 Twin Turbo w/ mods
#13
Pro
Join Date: May 2003
Location: California
Age: 39
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by invincible569
'
They also say that HRE has better service, but still not as great as Kinesis. As for Iforged, good luck getting any service, but for the price you get them, you can easily replace one wheel. HRE, DPE & Iforged are all made the same way supposedly, but not from the same place.
They also say that HRE has better service, but still not as great as Kinesis. As for Iforged, good luck getting any service, but for the price you get them, you can easily replace one wheel. HRE, DPE & Iforged are all made the same way supposedly, but not from the same place.
#15
Pro
Join Date: May 2003
Location: California
Age: 39
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ediddy
DPE are like iforged....they are nice knock off brands.....nice wheels for the money
#16
Originally Posted by 03TL-S
Iforged service isnt bad. Its just better off if you order the wheels through one of their distributors rather than directly with them. I have a set on my car and my brother has a set on his car. It only took 4-6 weeks to get the wheels. From what i hear, iforged wheels are finished at the same place as HRE wheels. I dont know much about DPE
"Wong’s company creates its forged wheels in Anaheim, California, less than two hours away from HRE’s own factory in San Diego."
#18
Former Sponsor
iTrader: (1)
Take it from me, 3 piece wheels are for those who don't mind paying out the nose. The problem per wheel is much higher due to human error, I mean, one monoblock forged piece is better than 3 pieces fastened together in a technical aspect. One out of ten wheels is bound to been have assembled incorectly, or have a n outer than was out of round from the factory. We had 2-3 problems with our three piece wheels that were sent back and fixed, but it was a hassle, and it was due to assembly inaccuracy and defective outer hoops. Guys with Lambos wouldn't mind paying whatever to have their wheels shipped, fixed and returned, but those guys have dough to blow. The only benefits of 3 piece wheels is exclusivety, style and stature. Functionally, they are def not superior than One piece monoblock forged wheels, or even Some cast wheels for that matter.
#19
Anthracite,Carmel,6MT
Thread Starter
Join Date: May 2004
Location: Las Vegas
Age: 59
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
I want to tell all you guys thanks for you help.
I have two things stopping me from buysing new rims, one..i just purchased a SC and two...i want to paint my Calipers Red and see what the look of my car will be with my current 19" OZ classe wheels.
If it needs improvement I will end up buy them in the spring.
I haven't had this car two years yet but I already have lay out 10K in wheels.tires,CAI in then removed, and now a SC.
Ok...one more item is need.....A NICE INTERCOOLER FOR MORE HP....LOL
Have a great day TL Lovers.
I have two things stopping me from buysing new rims, one..i just purchased a SC and two...i want to paint my Calipers Red and see what the look of my car will be with my current 19" OZ classe wheels.
If it needs improvement I will end up buy them in the spring.
I haven't had this car two years yet but I already have lay out 10K in wheels.tires,CAI in then removed, and now a SC.
Ok...one more item is need.....A NICE INTERCOOLER FOR MORE HP....LOL
Have a great day TL Lovers.
#21
Originally Posted by ediddy
Heres more to look at
www.wheelwarehouse.com
SouthBay Acura ask for Kai in parts
310-539-3636
www.importhookups.com
http://www.visracing.com/catalog/con...9c0a4add4091e1
they sell bodykits but I believe they sell rims also. Just remember if you buy volks that the wait time is 4-6 months depending on what you order. Good luck.
www.wheelwarehouse.com
SouthBay Acura ask for Kai in parts
310-539-3636
www.importhookups.com
http://www.visracing.com/catalog/con...9c0a4add4091e1
they sell bodykits but I believe they sell rims also. Just remember if you buy volks that the wait time is 4-6 months depending on what you order. Good luck.
wow there is a kaotik brand of wheels...... weird
#22
Advanced
Join Date: Jul 2004
Location: delawhere!
Age: 42
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
thats my g35 up there with the dpe's they actually look exactly like the ones on that blue m3 but my camera sucks and dpe are not knock offs.. cost way more than volks.. the color of them wheels is like a flat grey bluish color.. more grayish tho.. it looks like brushed aluminum but gunmetal.. real hot!
Thread
Thread Starter
Forum
Replies
Last Post
DunesCreations
3G TL Tires, Wheels & Suspension
13
09-09-2015 12:03 PM
nuldabz
3G TL Tires, Wheels & Suspension
3
09-03-2015 05:49 PM