neogauge

Got my H&R Sport springs 50104 this morning and I was ready. Had the old ones off and Bam! they were on. Measured...Drove it around for about 50 miles and measured again...Hmm well, Specs say (Front 1.4" and (Rear 1.3"). Well I got the (1.3" Rear @ 1 1/4" with my measuring stick) but the (Front 1/2" drop only) whats going on here?

ifirahse

iTrader: (6)

Give it about a week to fully settle.

neogauge

thanks for a answer... I thought it might be a bit stiffer in the front because of the motor, so the weight will soon get to it.

stillhere153

iTrader: (1)

h&r drop is minimal...
eibach = comptech = h&r > aspec
but they are all minimal and on the eibach/comptech/h&r the rear will look saggy

h&r + koni yellows = puresex

neogauge

yeah man, I am setup for a set of Koni's. From what I read that is the way to go with the H&R Sport springs. I measured from under the car at the jack spot and the front and rear are sitting 5 7/8" from the garage floor. So its not like the front didn't drop. So I should be happy that the car is level...

LookLikeTypeS

i dont know if anyone can tell me, right now i have 245 30 20 tires all the way around and have a two finger gap. i was thinking of getting the eibach prokit springs and only installing the fronts so i can close up the gap a little can anyone tell me if it will be just a little less then a two finger gap in the front if i do that?

LookLikeTypeS

i dont want that sagging in the back look cant stand that, and the two finger gap that im talking about is only in the back not in the front.

neogauge

well right now my in the front is 2fingers....Hmm I just thought of tequila, anyways yeah and I'm running 235/40-18"

six6

im getting eibach sportlines. that gonna look saggy?

bb4_vtec

i just installed comptech springs and i'm getting a horrible sag on the rear, 3 fingers in the front and 2 in the back. any way to get rid of the sag?

bb4_vtec

is it true that in the 6mt the driver front side would run a little higher than the passenger side?

neogauge

You installed CT Springs and you still have a gap? Were they lowering springs? Something just don't sound right.

neogauge

and what they hell is saggy? You know having the front higher than the back is so 80's LOL