jayunsplanet

iTrader: (1)

Trying to get them off and the threads are rusted pretty good. I've stripped the allen key part as well - at this point.

Anybody know what kind of endlinks the 05 TL uses? I.E. where/what to get at a auto store (Not Acura). I remember when I was replacing the sway bar on my 03 TL - the endlink stripped and I ended up replacing both sides from ones I got at like Pep Boys or somewhere - they were generic brand.

Acuraluvr

iTrader: (2)

I bought mine from Acura, I have one brand new one left. I think they were 17 or 20 bucks apiece. Definitely use some pb blaster on them to loosen the rust and connection a bit. Let me know if you'd like the end link that I have...

KN_TL

iTrader: (3)

You can get them here too:

http://www.ingallseng.com/mmy.php?ye...e=58&model=749

jokerman826

I had to use a recipricating saw to get them off of my car. The allen key part stripped out and was useless. it took over 2 hours for a 20 minute job. FML

ebelp

Get the OEM endlinks...they're cheap. I had to replace my driver's side endilnk because of the same reason. I ended up buying a new endlink and the entire mounting bracket it's attached to so I could replace it.

jayunsplanet

iTrader: (1)

Disregard - shop was able to get it all patched up - somehow. Guess that's what happens when you have the right tools.