EDFC - New Design! Black Control Module Housing...
#1
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
EDFC - New Design! Black Control Module Housing...
TEIN has redesigned their Electronic Damping Force Controller.
The new unit comes with a black control module and smaller motors. The new module is non compatible with the old motors and vice versa.
I believe the light up display is not green anymore but a whitish blue.
Image:
New motor on the right.
The new unit comes with a black control module and smaller motors. The new module is non compatible with the old motors and vice versa.
I believe the light up display is not green anymore but a whitish blue.
Image:
New motor on the right.
#4
Senior Moderator
when you intall the edfc and the SS, do you need to change the strut bar or anything else?
#5
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by Danny04TL
do you know if the new modual is the same price same install and everything?
#6
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by csmeance
when you intall the edfc and the SS, do you need to change the strut bar or anything else?
A) Delete the OEM strut bar
B) Cut of modify the OEM strut bar
C) Use Greddy 03+ Accord strut bar
D) Use Neuspeed 03+ Accord strut bar
E) Design your own strut bar!
#7
Burning Brakes
iTrader: (1)
Join Date: Aug 2005
Location: carpentersville, IL
Age: 37
Posts: 848
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by ACCURATEin
I believe it will retail for the same price as the original version which is $380
Do you guys know when the new black EDFC will be available?
Trending Topics
#8
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by shayan
I think the price is about the same. They are making you buy everything seperate. The controller kit is $230. The motor kit is $150. Strut kit is $30. But the strut kit is not available for our TL. I e-mailed Tein and they said that they are going to make the strut kit for the Rsx and the integra form the Acura lineup
Do you guys know when the new black EDFC will be available?
Do you guys know when the new black EDFC will be available?
...does anyone have this new kit per chance?
#10
Originally Posted by RJANACONDA
ok i hope i dont sound like a complete we todd but am i correct in thinking this device reads road/driving conditions and adjusts you shocks accordingly
#12
Burning Brakes
iTrader: (1)
Join Date: Aug 2005
Location: carpentersville, IL
Age: 37
Posts: 848
Likes: 0
Received 1 Like
on
1 Post
Sun of a gun It is not going to be compatible with the Tein SS, if I got this correct. On the website it says that the new EDFC is only compatable with the mono flex and comfort sport dampers. Why do we always get screwed over
#13
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by shayan
Sun of a gun It is not going to be compatible with the Tein SS, if I got this correct. On the website it says that the new EDFC is only compatable with the mono flex and comfort sport dampers. Why do we always get screwed over
#17
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
You will need to order the TEIN Super Street Dampers, which will include the full assembly of shocks and springs.
I've been running these for 54,000 miles and so far no problems.
I've been running these for 54,000 miles and so far no problems.
#18
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
I've got this kit here...ill take a picture of it...its pretty sweet lookin.
...can't wait to get this module installed so i can set it back to level 2 or 3 and hit the turns hard. i've been stuck on level 14 ever since that bastard broke into the TL and stole the original module.
...can't wait to get this module installed so i can set it back to level 2 or 3 and hit the turns hard. i've been stuck on level 14 ever since that bastard broke into the TL and stole the original module.
#19
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
#21
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,640
Received 3,860 Likes
on
2,580 Posts
well damn I was going to buy a set just for the black module and then sell my display with the new motors but since the new display wont work with the old motors guess I am keeping my silver one cause I am definitly not rewiring those things that was a pain.
#22
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by Danny04TL
looks nice.... $$$$?????
i was wondering where did you have it mounted?
i was wondering where did you have it mounted?
It'll be mounted in the slot above the power outlet.
#24
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by ACCURATEin
TEIN has redesigned their Electronic Damping Force Controller.
The new unit comes with a black control module and smaller motors. The new module is non compatible with the old motors and vice versa.
I believe the light up display is not green anymore but a whitish blue.
Image:
New motor on the right.
The new unit comes with a black control module and smaller motors. The new module is non compatible with the old motors and vice versa.
I believe the light up display is not green anymore but a whitish blue.
Image:
New motor on the right.
My brother came over and insisted we attempt to plug the new module up to the existing motors from the original EDFC. I told him that's fine and so we did. Apparently the new module DOES WORK with the original motors. I'm not sure why TEIN has this listed as them being noncompatible.
The display is still green, but if i remember correctly the original is a little different color green...the new one is greener if you will.
So now I am able to adjust the dampening from the driver seat once again. It has been stuck on level 14 ever since the original module was stolen.
If anyone feels the need to break the window on my TL and steal this new module, please don't do that...Just leave a note on my car with your number and i'll buy you one. Thanks.
#25
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by lembowski
So how much is the going rate for SS's and this ACCURATEin........installed of course
#27
8 second & 150 mph member
iTrader: (2)
I just left a note in your pm box hope thats enough as i couldnt drive down and leave a note for you but just ship mine to that address and all will be cool HAHA j/k i just got done installing the new edfc with the new motors tonight on a CL-S. Thing is sweet and adjusts the motors fast with the presets.
#28
Originally Posted by ACCURATEin
If anyone feels the need to break the window on my TL and steal this new module, please don't do that...Just leave a note on my car with your number and i'll buy you one. Thanks.
#29
FOR SALE - BM
Join Date: Nov 2005
Location: Philadelphia, PA
Age: 46
Posts: 1,503
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ACCURATEin
Allrighty then. Here is the story.
My brother came over and insisted we attempt to plug the new module up to the existing motors from the original EDFC. I told him that's fine and so we did. Apparently the new module DOES WORK with the original motors. I'm not sure why TEIN has this listed as them being noncompatible.
The display is still green, but if i remember correctly the original is a little different color green...the new one is greener if you will.
So now I am able to adjust the dampening from the driver seat once again. It has been stuck on level 14 ever since the original module was stolen.
If anyone feels the need to break the window on my TL and steal this new module, please don't do that...Just leave a note on my car with your number and i'll buy you one. Thanks.
My brother came over and insisted we attempt to plug the new module up to the existing motors from the original EDFC. I told him that's fine and so we did. Apparently the new module DOES WORK with the original motors. I'm not sure why TEIN has this listed as them being noncompatible.
The display is still green, but if i remember correctly the original is a little different color green...the new one is greener if you will.
So now I am able to adjust the dampening from the driver seat once again. It has been stuck on level 14 ever since the original module was stolen.
If anyone feels the need to break the window on my TL and steal this new module, please don't do that...Just leave a note on my car with your number and i'll buy you one. Thanks.
#30
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by RYAN97812
I just left a note in your pm box hope thats enough as i couldnt drive down and leave a note for you but just ship mine to that address and all will be cool HAHA j/k i just got done installing the new edfc with the new motors tonight on a CL-S. Thing is sweet and adjusts the motors fast with the presets.
haha that's funny but at the same time its not a laughing matter!! I was upset because at first i didnt think the guy got away with anything because when i looked in the window the radar detector was in the seat...so i assumed that if the radar detector never made it out then nothing else would be gone. Apparently the EDFC module was the primary target and i finally realized it was missing 24 hours later.
..send the payment via paypal and i'll send it ups ground...should arrive in jersey in 2 business days. j/k!
How much of a pain was it to wire those motors up?!
#31
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by ComptechTL
I know how that feels. I'd rather give it away rather than going thru all the trouble. Its such a PITA when you have to fix and replace something that go damaged/stolen.
#32
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by drdamian
So, are you going to use the old motors with the new controller???.... if this really does work then maybe i will just buy the control box. its a pain in the ass to run those wires again.
Tein has it listed on their website that the new module isn't compatible with the old motors, but according to the results of the experiment,..the motors seem to adjust without any problems.
It definitely wouldn't have been fun to rewire the entire system.
#33
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
I just called Tein and spoke to Joe in the tech dept and he confirmed that the new black module will work just fine with the old motors.
Thread
Thread Starter
Forum
Replies
Last Post
BoricuaTL
Car Parts for Sale
138
04-08-2016 01:08 PM
HeloDown
3G TL Problems & Fixes
4
09-08-2015 06:51 PM