D-100: The Official "Does This Wheel and/or Tire Fit My Car" Thread
#2321
Drifting
These are the 3 rims I'm looking at right now. I need to know which ones will fit? On my car. Oh and Im not lowering my car at all.
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): 6 Spd Manual
Year/Trim (04-07, Base or Type S):04 , Base
Wheel Make/Model: Platinum Widow
Wheel Size (**X**): 20X8
Wheel Offset (+**):42
If lowered (amount):0
Wheel Make/Model: TSW Jarama
Wheel Size (**X**): 19X8
Wheel Offset (+**):40
If lowered (amount):0
Wheel Make/Model: TSW Stowe
Wheel Size (**X**): 19X8
Wheel Offset (+**): 40
If lowered (amount):0
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): 6 Spd Manual
Year/Trim (04-07, Base or Type S):04 , Base
Wheel Make/Model: Platinum Widow
Wheel Size (**X**): 20X8
Wheel Offset (+**):42
If lowered (amount):0
Wheel Make/Model: TSW Jarama
Wheel Size (**X**): 19X8
Wheel Offset (+**):40
If lowered (amount):0
Wheel Make/Model: TSW Stowe
Wheel Size (**X**): 19X8
Wheel Offset (+**): 40
If lowered (amount):0
Hey guys. Had my 08 TL-S for awhile now and the urge finally got too strong to resist
Year: 2008
Model: Type-S 6MT
I'm thinking about getting the Work CR-Kai in 18x8.5. Would run 235/40/18 Continental ExtremeContact DW.
Will the +25 offset rear work without any fender rolling/cutting? And what's the lowest offset I can go in the front and still clear the Brembos?
Lastly, I'll probably also end up dropping my car - nothing too aggressive. Probably 1"-1.5" when it's all said and done.
Would something like +30 front/+25 rear have any fitment issues (even with my planned ride height drop in the future)? Looks-wise would look pretty nice?
Any help is appreciated! TIA!
Year: 2008
Model: Type-S 6MT
I'm thinking about getting the Work CR-Kai in 18x8.5. Would run 235/40/18 Continental ExtremeContact DW.
Will the +25 offset rear work without any fender rolling/cutting? And what's the lowest offset I can go in the front and still clear the Brembos?
Lastly, I'll probably also end up dropping my car - nothing too aggressive. Probably 1"-1.5" when it's all said and done.
Would something like +30 front/+25 rear have any fitment issues (even with my planned ride height drop in the future)? Looks-wise would look pretty nice?
Any help is appreciated! TIA!
20s are big on the TL IMO if u want to pull off 20s your car should be slammed to make them look right and your guna need to run a 25 series sidewall. The front will most likely be flush rears almost flush
#2323
I like turtles
Somebody quickly answer mine just for rear. Ready to buy if this will work (let me know if what is required with it)
F 19x8.5 +35
R 19x10 +35.
I dont want a negative chamber
Will be lowered on Tein SS
Second question would be what size tires.
F 19x8.5 +35
R 19x10 +35.
I dont want a negative chamber
Will be lowered on Tein SS
Second question would be what size tires.
#2324
Question on Brembo/Big Brake Clearance
Transmission: Manual
Year/Trim: 06 6MT
Wheel Make/Model: Forgestar F14
Wheel Size: 19x9
Wheel Offset: +38
If lowered: 2.0''F / 1.75''R (H&R racing spring)
Transmission: Manual
Year/Trim: 06 6MT
Wheel Make/Model: Forgestar F14
Wheel Size: 19x9
Wheel Offset: +38
If lowered: 2.0''F / 1.75''R (H&R racing spring)
#2326
I HAVE 08 TL-S 5AT
Questions on Wheels
Wheel Make/Model: ENKEI RACING PF01
Wheel Size (**X**): 17X8
Wheel Offset (+**): +50
If lowered (amount): at moment not lowered, but what are my lowering limits?
Tire size: 235/45-17
Thank you.
Questions on Wheels
Wheel Make/Model: ENKEI RACING PF01
Wheel Size (**X**): 17X8
Wheel Offset (+**): +50
If lowered (amount): at moment not lowered, but what are my lowering limits?
Tire size: 235/45-17
Thank you.
#2327
THIS WHEEL AS WELL, THANKS
Questions on Wheels
Wheel Make/Model: KOSEI K4R
Wheel Size (**X**): 17X8
Wheel Offset (+**): +50
If lowered (amount): at moment not lowered, but what are my lowering limits?
Tire size: 235/45-17
Thank you.
Questions on Wheels
Wheel Make/Model: KOSEI K4R
Wheel Size (**X**): 17X8
Wheel Offset (+**): +50
If lowered (amount): at moment not lowered, but what are my lowering limits?
Tire size: 235/45-17
Thank you.
#2328
Drifting
^ you'll need spacers those rims are made more for a tsx or a s2000 our stock rims are+40 I believe so either run some spacers o get other better fitting rims
#2331
Here I come!
Which set up should I go with on some 19's for an 05 TL w/Brembos? Should I go staggered or will 19x9.5's look ok all the way around?
My options are:
Sizes available: 19x8.5 and 19x9.5
Offsets available: +35, +38, +40, +45, +48
Don't care about ride quality, just want the wheels flush with minimal rubbing.
My options are:
Sizes available: 19x8.5 and 19x9.5
Offsets available: +35, +38, +40, +45, +48
Don't care about ride quality, just want the wheels flush with minimal rubbing.
#2332
Both the rims I asked about I got from tirerack and when I called the customer service also agreed with fitment. Are they just wrong?
#2333
Drifting
#2334
Drifting
Which set up should I go with on some 19's for an 05 TL w/Brembos? Should I go staggered or will 19x9.5's look ok all the way around?
My options are:
Sizes available: 19x8.5 and 19x9.5
Offsets available: +35, +38, +40, +45, +48
Don't care about ride quality, just want the wheels flush with minimal rubbing.
My options are:
Sizes available: 19x8.5 and 19x9.5
Offsets available: +35, +38, +40, +45, +48
Don't care about ride quality, just want the wheels flush with minimal rubbing.
#2335
#2336
I like turtles
#2337
Here I come!
#2338
Drifting
#2341
Moderator
iTrader: (3)
^The width and offset is fine but I would advise against getting 20s. Look into a set of 19s with the same specs.
The following users liked this post:
ericbad34 (09-20-2012)
The following users liked this post:
ericbad34 (09-20-2012)
#2344
Help with '04 fitment
'04 TL with Aspec kit (not sure about the suspension, but don't think it is Aspec, just body kit)
Auto tranny
Wheels -
front 18x9 +38 offset with 245/40 Falken Azenis
rear 18x9 +30 offset same tires
No drop, just stock suspension. May drop .5 - 1" max in the future. Probably not though unless it just looks ridiculous.
Question is, will I deffinitely need to roll my fenders, and if so do I need to do front and rear or just front or just rear? Thank you guys for your help! I don't know what I'd do without the info I find on this site. Hopefully someday I'll gain enough experience and knowledge to give back some.
Auto tranny
Wheels -
front 18x9 +38 offset with 245/40 Falken Azenis
rear 18x9 +30 offset same tires
No drop, just stock suspension. May drop .5 - 1" max in the future. Probably not though unless it just looks ridiculous.
Question is, will I deffinitely need to roll my fenders, and if so do I need to do front and rear or just front or just rear? Thank you guys for your help! I don't know what I'd do without the info I find on this site. Hopefully someday I'll gain enough experience and knowledge to give back some.
#2345
'04 TL with Aspec kit (not sure about the suspension, but don't think it is Aspec, just body kit)
Auto tranny
Wheels -
front 18x9 +38 offset with 245/40 Falken Azenis
rear 18x9 +30 offset same tires
No drop, just stock suspension. May drop .5 - 1" max in the future. Probably not though unless it just looks ridiculous.
Question is, will I deffinitely need to roll my fenders, and if so do I need to do front and rear or just front or just rear? Thank you guys for your help! I don't know what I'd do without the info I find on this site. Hopefully someday I'll gain enough experience and knowledge to give back some.
Auto tranny
Wheels -
front 18x9 +38 offset with 245/40 Falken Azenis
rear 18x9 +30 offset same tires
No drop, just stock suspension. May drop .5 - 1" max in the future. Probably not though unless it just looks ridiculous.
Question is, will I deffinitely need to roll my fenders, and if so do I need to do front and rear or just front or just rear? Thank you guys for your help! I don't know what I'd do without the info I find on this site. Hopefully someday I'll gain enough experience and knowledge to give back some.
#2346
Help with rim + wheel fitment
Questions on Wheels + tires
Wheel Make/Model: Varrstoen 2.2.1
Wheel Size (**X**): F: 18x9.5 R: 18x10.5
Wheel Offset (+**): F: +12 R: +15
Tire Size: F: 215/40/18 R:235/40/18
If lowered (amount): F:1.75" R:1.5"
Will i need to pull and roll or just a roll? I want to test fit them, but will they even fit the stock wheel wells?
Wheel Make/Model: Varrstoen 2.2.1
Wheel Size (**X**): F: 18x9.5 R: 18x10.5
Wheel Offset (+**): F: +12 R: +15
Tire Size: F: 215/40/18 R:235/40/18
If lowered (amount): F:1.75" R:1.5"
Will i need to pull and roll or just a roll? I want to test fit them, but will they even fit the stock wheel wells?
#2348
Drifting
Questions on Wheels + tires
Wheel Make/Model: Varrstoen 2.2.1
Wheel Size (**X**): F: 18x9.5 R: 18x10.5
Wheel Offset (+**): F: +12 R: +15
Tire Size: F: 215/40/18 R:235/40/18
If lowered (amount): F:1.75" R:1.5"
Will i need to pull and roll or just a roll? I want to test fit them, but will they even fit the stock wheel wells?
Wheel Make/Model: Varrstoen 2.2.1
Wheel Size (**X**): F: 18x9.5 R: 18x10.5
Wheel Offset (+**): F: +12 R: +15
Tire Size: F: 215/40/18 R:235/40/18
If lowered (amount): F:1.75" R:1.5"
Will i need to pull and roll or just a roll? I want to test fit them, but will they even fit the stock wheel wells?
#2350
Questions on Wheels + tires
Wheel Make/Model: Varrstoen 2.2.1
Wheel Size (**X**): F: 18x9.5 R: 18x10.5
Wheel Offset (+**): F: +12 R: +15
Tire Size: F: 215/40/18 R:235/40/18
If lowered (amount): F:1.75" R:1.5"
Will i need to pull and roll or just a roll? I want to test fit them, but will they even fit the stock wheel wells?
Wheel Make/Model: Varrstoen 2.2.1
Wheel Size (**X**): F: 18x9.5 R: 18x10.5
Wheel Offset (+**): F: +12 R: +15
Tire Size: F: 215/40/18 R:235/40/18
If lowered (amount): F:1.75" R:1.5"
Will i need to pull and roll or just a roll? I want to test fit them, but will they even fit the stock wheel wells?
#2352
Questions on Wheels + tires
Wheel Make/Model: Enkei RPF1
Wheel Size (**X**): F: 18x8.5 R: 18x8.5
Wheel Offset (+**): F: +30 R: +30
Tire Size: F: 245/40/18 R:245/40/18
If lowered (amount): F:1.75" R:1.5"
Wondering if this setup will look flush? Or will spacers be required for a flush look?
Wheel Make/Model: Enkei RPF1
Wheel Size (**X**): F: 18x8.5 R: 18x8.5
Wheel Offset (+**): F: +30 R: +30
Tire Size: F: 245/40/18 R:245/40/18
If lowered (amount): F:1.75" R:1.5"
Wondering if this setup will look flush? Or will spacers be required for a flush look?
#2353
4th Gear
Wheel Make/Model: Axis Rev
Wheel Size (**X**): F:19x8.5 R:19x9.5
Wheel Offset (+**): +20
NOT Lowered
also wondering what would be the best tires for said wheels
Wheel Size (**X**): F:19x8.5 R:19x9.5
Wheel Offset (+**): +20
NOT Lowered
also wondering what would be the best tires for said wheels
#2355
Moderator
iTrader: (3)
Those LFA reps have a hub bore of 60.1 while the 3G TL has a hub bore of 64.1. You'll need to get adapters if you want to mount those with no issues. Contact the seller and see if they have any you can buy.
#2356
Team Anthracite President
Join Date: Mar 2002
Location: Silicon Valley, California
Posts: 988
Likes: 0
Received 5 Likes
on
3 Posts
I have a chance to pick up some tires really cheap.
Wheel Make/Model: Nitto 555 250/50/17
Wheel Size (**X**): Stock
Wheel Offset (+**): Stock
If lowered (amount):0
My car is a stock 2007 TL Type S. Will these fit?
Thanks,
Wheel Make/Model: Nitto 555 250/50/17
Wheel Size (**X**): Stock
Wheel Offset (+**): Stock
If lowered (amount):0
My car is a stock 2007 TL Type S. Will these fit?
Thanks,
Last edited by Vffr1; 10-16-2012 at 06:43 PM.
#2357
Moderator
iTrader: (3)
250mm width? Did you mean 255?
Also, the side wall is 5mm too thick. A 45-series sidewall is recommended for 17" wheels. Stock tires were 235/45/17.
Also, the side wall is 5mm too thick. A 45-series sidewall is recommended for 17" wheels. Stock tires were 235/45/17.
#2359
Team Anthracite President
Join Date: Mar 2002
Location: Silicon Valley, California
Posts: 988
Likes: 0
Received 5 Likes
on
3 Posts
Thanks fellows. I got confused, I was thinking 250/40/17, I was planning on getting 245/45/17. Seems either a 245/45 or 255/40 will fit fine.
Think I'll stick with 245/45/17.
Thank you again,
Michael
Think I'll stick with 245/45/17.
Thank you again,
Michael
Last edited by Vffr1; 10-16-2012 at 07:20 PM.
#2360
Will do, any suggestions on where to get some if they don't have any?