Wiring job went bad - no license plate lights - accord fogs went out too
#1
Race Director
Thread Starter
iTrader: (8)
Wiring job went bad - no license plate lights - accord fogs went out too
I was re-wiring my cold cathode license plate lights.
I KNOW that I wired them right.
I turn on the parking lights and low and behold - my accord fogs turn on then they turned off.
My license plate lights don't even work too because I plugged my leds back in and they didn't light.
Which fuse should I check for?
I KNOW that I wired them right.
I turn on the parking lights and low and behold - my accord fogs turn on then they turned off.
My license plate lights don't even work too because I plugged my leds back in and they didn't light.
Which fuse should I check for?
#2
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
WTF...
Read my thread, just a BAD modding day, huh!?!?
I would say to check out fuse #6 although if that one was fried, you'd have a LOT more not functioning.
Did you pop the inline fuse on your accord fogs?!?
What did you tap your accord fogs into as the trigger to turn on?
Read my thread, just a BAD modding day, huh!?!?
I would say to check out fuse #6 although if that one was fried, you'd have a LOT more not functioning.
Did you pop the inline fuse on your accord fogs?!?
What did you tap your accord fogs into as the trigger to turn on?
#3
Race Director
Thread Starter
iTrader: (8)
SHIT.
I'm stupid.
Not only did my accord fogs and license light go out, my whole parking lights went out!
My accord fogs are tapped to my parking lights.
Fuse on the accord fog is still good.
Dome lights still work.
I'm stupid.
Not only did my accord fogs and license light go out, my whole parking lights went out!
My accord fogs are tapped to my parking lights.
Fuse on the accord fog is still good.
Dome lights still work.
#4
Race Director
Thread Starter
iTrader: (8)
Will you look at that - 10A fuse #4 under hood blown.
But still why does my cold cathode not work and how did it blow the fuse?!?!?
I HOPE I didn't blow the inverter.
That means no driving around at night for a week!
But still why does my cold cathode not work and how did it blow the fuse?!?!?
I HOPE I didn't blow the inverter.
That means no driving around at night for a week!
#6
Race Director
Thread Starter
iTrader: (8)
Replaced the fuse.
No where had 10Amp mini fuses.
All sold out.
I did find 10Amp mini fuses that glow when they pop.
Cost 5 bucks for 2 fuses. About double the price?
Anywho, parking lights now working. Accord fogs work too.
I ghetto wired the cold cathodes and thank goodness the inverter didn't blow.
No where had 10Amp mini fuses.
All sold out.
I did find 10Amp mini fuses that glow when they pop.
Cost 5 bucks for 2 fuses. About double the price?
Anywho, parking lights now working. Accord fogs work too.
I ghetto wired the cold cathodes and thank goodness the inverter didn't blow.
Trending Topics
#8
Race Director
Thread Starter
iTrader: (8)
I definitely didn't cross wires.
I just plugged the blade connectors into the coresponding slot in the connector.
VERY strange.
Thread
Thread Starter
Forum
Replies
Last Post
RLX-Sport Hybrid
3G RLX (2013+)
43
12-16-2015 10:45 PM
darksky
3G TL Problems & Fixes
2
09-05-2015 03:11 AM
prox
5G TLX Problems & Fixes
6
09-01-2015 02:03 AM