Vibration under hard acceleration
#1
Vibration under hard acceleration
It first started after I replaced my cracked v2 precat delete with a new v3, and like an idiot I used the intermediate shaft as a leverage point to tighten the O2 defouler. After that it made a horrible vibrating sound, but no vibrations through the steering wheel just a slight vibration through the floor.
So, I bought a new intermediate shaft and installed that. There's still a light vibration, but not as bad as it was before. It only vibrates now at higher rpm, but only when I accelerate. If I'm just cruising at say 5000rpm there's no vibration, but as soon as I floor it then it vibrates.
So, I'm wondering if I could have messed up something in my trans or maybe my differential?
So, I bought a new intermediate shaft and installed that. There's still a light vibration, but not as bad as it was before. It only vibrates now at higher rpm, but only when I accelerate. If I'm just cruising at say 5000rpm there's no vibration, but as soon as I floor it then it vibrates.
So, I'm wondering if I could have messed up something in my trans or maybe my differential?
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM
04, 2004, accelaration, acceleration, acura, cl, hard, heavy, intermidiate, mdx, shaft, shaking, tl, tsx, vibration