everto13

Hello Friends,

Over the past few months, I've noticed that the perforated leather on my '04 TL's doors (just above the armrest) is starting to come loose/untucked from the surrounding trim at the edges. This is happening in small places on 3 of the 4 doors.

Does anyone have a fix for this issue? Acura doesn't list this panel as a separate part, so I don't know if it's removable.

Sorry this is a repost, but I did a search and didn't find anything. Thanks!

Slpr04UA6

Must be our Heat in Florida! Mine is doing the same. Almost as if it is coming unglued at little spots. Mine are very small, and only on front doors right now. Interested for a fix, if anyone knows of one.

lilsid112

iTrader: (7)

My front driver door is doing the same think at the corner. I just tuck it back in since its just the very edge thats coming loose. Im wait till it gets worse before I take it to an interior shop to respray some glue to hold it.

everto13

I guess the Florida heat works fast. I've owned the car since new, but only been down here 2 years. If its going to cost $ to fix I guess I'll wait a while, just don't want the material to rip!

@lilsid112, any idea what regluing would cost?

EATSLEEPRACE

iTrader: (1)

I use to hate that on my 05tl before....I uses little glue and put it back together..

everto13

Did you use a glue gun or some other kind of adhesive?

nyczkennyy

its not the florida heat since i live in nyc and both my front door panels are like that. i just keep tucking it back in every time it pops out.

lilsid112

iTrader: (7)

Im actually not sure about the cost. I cant imagine it being expensive.

csmeance

I'd just use some 3M automotive interior adhesive and call it a day.

TheLowLife

^ yep. You can pick a can of that stuff up at a local auto parts store for >$10

Bearcat94

Cool. I've got the same problem .... getting more noticable too.

BboyPezz

Could Anyone who used the adhesive share what they did. My leather on the door is cominng off also and its so annoying.

BboyPezz

Or share the original thread. I cant find a good thread on this.