New weeyolls! (Update 7/11/12)
Trending Topics
#11
Thanks all =]
and the wheels are 18x9.5 +27 (22 w/ 5mm spacer front for clearance)
I love the way the rear sits as is, but the front needs less poke but I cannot help it as I need to clear the calipers I'm not a fan of poke but I'll have to settle
ride is good, although w/ the nankang ultra sport ns2 I wouldn't drive too aggressive. So far is quite comfortable though surprisingly with the thinner sidewall and still same tread width. I wonder if I can fit a 245 and not rub but given
I've counted only 3 instances of rub and I bet it was the driver side bumper tab not too sure yet.
I am also rolled all around, I think that is necessary
I'll be shooting it in a few hours and pictures possibly tonight.
and the wheels are 18x9.5 +27 (22 w/ 5mm spacer front for clearance)
I love the way the rear sits as is, but the front needs less poke but I cannot help it as I need to clear the calipers I'm not a fan of poke but I'll have to settle
ride is good, although w/ the nankang ultra sport ns2 I wouldn't drive too aggressive. So far is quite comfortable though surprisingly with the thinner sidewall and still same tread width. I wonder if I can fit a 245 and not rub but given
I've counted only 3 instances of rub and I bet it was the driver side bumper tab not too sure yet.
I am also rolled all around, I think that is necessary
I'll be shooting it in a few hours and pictures possibly tonight.
Last edited by DC2many; 05-02-2012 at 02:42 PM.
#13
keep it clean
Nice! What brand of spacers are you running? I assume you didn't need to use extended studs.
#17
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,219
Received 1,983 Likes
on
1,336 Posts
LOL at your thread title.
I text like that to my gurlfreeyend.
wheels look good.
I text like that to my gurlfreeyend.
wheels look good.
#19
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Nice wheels-I like the Brembo's too.
#21
Moderator
iTrader: (3)
LOVE
#23
Thanks! glad you like them =] they were gasping for air previously =p and now they can be seen too!
Why thank you jelly =]
Thank you good sir JD =)
235/40/18, I'd like to go 245 but may start rubbing after what I've noticed so far
Ask and so thy may receive
Thanks for the rawesome
Thanks for the T
hehe
Yes it is, but in my head 5mm seems to be too booby poppin (if rear is booty poppin) =S. Thanks for the =]
Now you're in the multi-quote thanks for the and yes they are Enkei nt03
Arigato! and -drum roll- nao you nO! Thanks for the compliment =]
Thanks for the comment! and yes
Access Granted
Why Thank You AnthraciteAspec =]
Glad you like them! Thanks! and 18x9.5 +27 (22 up front to clear caliper)
Thanks for the compliment
Thanks wid it, Appreciate the compliment =]
Thanks for the guise!! =]
I could use a little bit of sunk but gotta clear the caliper so what can I do -shrug-
Finally the stress of first wheel set is over! At first thought these were too "track" looking but I guess I'm slowly getting use to it. 200 miles so far and no complaints from me. Butt dyno likes the dynamic weight loss they weigh ~19lbs each no tire. Argh and I want a bit of sunk to the front =S lol
Very rusty with camera =S I think I could do a lot better
Last edited by DC2many; 05-03-2012 at 12:41 AM.
The following users liked this post:
AcuraIntegTL (05-03-2012)
#24
Safety Car
Nice wheels man. Your lip kit is sagging a bit in the back also.
#25
Cruising in my
How much did you pay to paint your rear Type-s lip? I have a white one sitting in my basement ready to go for when my ATLP quads arrive
Love the wheels - I've been running GTC01's for 3 years now
Love the wheels - I've been running GTC01's for 3 years now
#28
Thanks mang =] and yea, I hate sagging if it is something that can be reverted while it may be annoyingly so.. >=[
I need to get it re-sprayed so I have to take it off anyway and I'll re-drill the zipclip spot. I think I have it drilled too low and also not running the metal brackets.
Would I need new tape or has anyone ran the rear lip with no tape and it sat flush. Thanks in advance
I just bought the paint and paid my cousin a pack of cigarettes beer or something because he painted it.
You'll definitely like the quad look and atlp
and
Thanks for the T =]
Thanks for the compliment =]
Haha I became fond of the dual valve stems
I think their purpose is either for nitrogen and purge the other stem of air I believe.
Because race car
I need to get it re-sprayed so I have to take it off anyway and I'll re-drill the zipclip spot. I think I have it drilled too low and also not running the metal brackets.
Would I need new tape or has anyone ran the rear lip with no tape and it sat flush. Thanks in advance
You'll definitely like the quad look and atlp
and
Thanks for the T =]
Haha I became fond of the dual valve stems
I think their purpose is either for nitrogen and purge the other stem of air I believe.
Because race car
Last edited by DC2many; 05-05-2012 at 04:38 AM.
#30
Thank you Clean_CL-S =] I don't think they're available in 19. 18 largest diameter they make and they can get to 10.5 width
I could be wrong but size chart says only 17 and 18 but I've seen smaller sizes not on the chart
#31
Moderator
iTrader: (3)
I absolutely love those wheels. Your car is so hawt
#32
#34
#38
#39
Race Director
iTrader: (8)
Looks great!
#40
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Nice....rubbing elbows with the Ferrari's!