omnuts

^ I'm looking also, no luck so far, damn I should have puller the trigger way back

maharajamd

iTrader: (1)

Wow I must have gotten the last one! Gets welded in tonight!

omnuts

^lucky you

maharajamd

iTrader: (1)

Thought I would update! Tips installed and look great! Did the MM delete too.

I have to say I'm not sure how everyone is getting this done so quickly and cheaply. I went to a place where I stood right there and watched. It took a while to get the placement perfect on the tips. Actually, he tig welded about an extra inch of pipe onto the tips so that they looked right, sat right, and won't blow carbon all over my bumper. The inlet on the tips are much bigger then the outlet on the mufflers. So if you guys are just hacking it off at the base and pushing the tips against the muffler I don't see how it would look right. Nor could you so easily weld the bigger onto the smaller with good strength and fitment.

We did have to trim out some of the inside part of the aspec rear lip and rear bumper. You can't see it at all of course, and I hated watching it happen lol, but to get the angles right I'm pretty sure it must be done.

Honestly putting some short curved pipe on the tips would be the perfect option. That way they are more straight.

As for the MM delete. Hey, you all may say not do it or there is no difference, but I disagree! I effin love it! It sounds more like a G 2k-3k, sounds a bit deeper and more of a growl 33k-5k, and sounds a lot better 5k+. And on the highway going 75 I can just barely hear a deep exhaust note. Which is exactly what I wanted.

Clean_CL-S

I found them on ebay but for twice the price
http://cgi.ebay.com/ebaymotors/ws/eB...m=270314331665

I'll post pics up once I install them.

omnuts

^ nice find, I'll check it out

Horditruck

iTrader: (1)

car is so shiny LOL, but yeah great looking tips

Clean_CL-S

installed the tips over the weekend. Love em'

omnuts

^came out nice, I'll try to get these soon

nivekov

I've had this thread saved for months now and when I decide to pull the trigger its discontinued...

maharajamd

iTrader: (1)

Mine. Installed last week. I've gotten nothing but compliments.

DC2many

imo looks good in some angles or pics some look like they're too small due to the lack of space from the base bumpers/lip
and the price of the ebay one is =( compared to the discontinued one

anyone have something similar to the base tip or the atlp base tip? what is the atlp i think I may have seen its style around before i want it!

maharajamd

iTrader: (1)

If I could say anything bad about them is that they are slightly angled, not straight out like the type-s. And that is due to clearance. We actually tugged on them for a bit and bent the exhaust hangers a little to correct it as much as we could. Worth $100? Sure. $200? Probably not.

Matt HKD

iTrader: (1)

I'll play!

BuffBakerGA

iTrader: (2)

Where did you purchase the tips from Matt?

devilldawgg

Just got mine installed today, thanks for the great advice fellas!!!

kevinballer08

^where did you buy them?

devilldawgg

Got them from here

jmciver92

i just bought em on ebay too. a little more but i hope it will be worth it.
since they are just tips though the sound shouldn't change right?

r3n3gad3II

Shouldn't change with just the tips

beaver88

would these tips look good on the type s rear?

Matt HKD

iTrader: (1)

I'm not sure where mine came from, a friend bought them for me for christmas last year. I'll ask him

vinceeyy

i got them from:
http://www.afterthoughtsauto.com/dual-exhaust-tips.html
they're discontinued as their website says.
Although these fit extremely well and are very easy, I'm sure with some hunting you can find others that would work out as well.
If enough of you hound me, I'm happy to measure them to give you more of a head start.

mallom

http://cgi.ebay.com/ebaymotors/Grand...item1e6445b02d

Project X

Are these the same ones from the pics and original post? Looks very similar and a great price!!

How much would the install cost approximately ?

Please confirm I wanna get these!!

Thanks

Project X

Looks like that auction ended

mallom

I heard they are the same. But I never bought one

magnod

Are those pics with a base A SPEC kit or Type S kit?

I haven't learned to tell the difference between the kits, but I thought the Type S kit had more room for the exhaust. So if I have the base ASPEC kit, would these still fit?

Project X

i just purchased these through the ebay listing.. i contacted the seller directly and they were able to knock off $10 bux.

looking forward to getting these installed when they come in.

maharajamd

iTrader: (1)

The exhaust port areas are wider, like 8" instead of 6". I think. If you got the type-s rear lip then you'll have to do a little bit of cutting to make it fit. But it does fit and it does look nice.

k20eghatch

nice mod

AcuraIntegTL

I have a Base TL with a Type-S rear bumper. This is how it turned out.

beaver88

^ Thanks for the pics, they fit pretty nicely. I was scared that there was going to be a big gap. Where did you get it welded on. I'm in socal

AcuraIntegTL

I'm down in SD. I go to this place in South Chula Vista called Ladezma's. I've been going to them since I was in high school.

magnod

Please excuse me poor reading comprehension, but do you mean that the base ASPEC kits is 8" and the Type S ASPEC is 6"?

So if I get the base ASPEC and dual tips I won't have to cut/shave anything?

Thanks

zinxc

I read somewhere that the ASPEC rear lip on the Type S is 8'' and the base ASPEC is 6''. Idk, I could be wrong. But if this fit perfectly on the base ASPEC, I'm not going to spend money buying a Type S rear ASPEC.

The Blue Abyss

iTrader: (1)

FYI, for those yet to purchase, you can use coupon code = save5 to save 5% when you order them off their website instead of eBay motors:

http://www.assuredautomotiveproducts...e-ACDDW225.htm

eduthesamurai

Awesomeeeeeeee.

Kinetic

man you making everyone want a set of these quads =P

The Blue Abyss

iTrader: (1)

Well, it really turned out to be a save $5 coupon (their Facebook page said 5%), not 5%, which would have been $6 off. Anyhow, I wound up paying $114.90 + $17.80 S&H = $132.70 total. Sure hope they're worth it after paying even more to have them welded on