SSMTL04

it's going to sit a little below the exhaust bumper cover. Any higher the tips will melt that black plastic cover

blkmz3

When you had them welded you could position or angle it however you want.

maharajamd

iTrader: (1)

^This. I have mine pointing slightly up and slightly out.

jbwua6

Hey I licked the link you posted earlier and that link is expired.
I searched on the site and found these
http://www.afterthoughtsauto.com/twin-exhaust-tips.html

Is these the same ones you have?

Tyler Rendon

Nice i think im going to get me a set of these

tg22ar

Those are badass but I'm ordering these:

http://www.redtailperformance.com/Ex...ance_RTP-I027/

Is 2.5"ID the right size for the inlet?

When I go get these welded on im going to do the mid muffler delete while im there. I need a little purr out of her.

von5t3R

iTrader: (2)

so guys I finally decided to go with quads on a base aspec but finding the right ones took a lot of time,
so I just got my tips in the mail last week and was just wondering if I can get some of your opinion, if I should weld these on or sell em the specs are 14inches long 3in inlet 3.5 and 3in out let here are some pics



thanks in advance

usdmJON

von5t3R

iTrader: (2)

Oh yeah from tip to tip its 7in trimming will be needed

maharajamd

iTrader: (1)

I'm more of a double wall kinda guy myself...

I think I've posted my pics in here before but not sure.

von5t3R

iTrader: (2)

That looks nice

maharajamd

iTrader: (1)

Thanks. Best $67 ever! Lol

DejaVu85

Does this deal still exist?

maharajamd

iTrader: (1)

No but they can be found. I think they are going for like $120 though.

Smooth06

iTrader: (1)

double wall looks sweet

DejaVu85

You think these would fit my 04 Base TL with Aspec.
http://www.summitracing.com/int/part...5168/overview/

maharajamd

iTrader: (1)

I think we have 6 inches to play with and the type-s has 8.

So the answer is probably no on those.

tomlinsonj

iTrader: (2)

^^ The trick is you need to order a pair of tips that are staggered, but in opposition. Double wall, polished, $120, FTW.

DejaVu85

Which ones are yours?

tomlinsonj

iTrader: (2)

These guys, from your second link. You can see that they are polished from the inlet to the outlet. Some alternatives just have the tips polished (Ford Flex look-a-like), but the more popular ones on the forum are polished from end to end:

DejaVu85

My muffler has an Inlet of 2.25
Did you guys have trouble installing 2.5 Tips? Did you have to enlarge the hole of the muffler?

tomlinsonj

iTrader: (2)

There is a 2.25" inlet version. That's what I used.

DejaVu85

Yea, but due to cost and shipping fee's I had to find a supplier here in Canada "DT Exhaust" and they have a 2.5" version of the Tips.

JHAYJHAYB

Nice fit man!

conort2390

i tried looking at those links and the page was not found. does anyone know where to get the tl type s tips?

Kev1n

http://www.socal-autosports.com/

TLin401

I just found this for you $67 modders

http://www.autoanything.com/exhausts...FQxqfgodQQoAig

Kev1n

awh. i got excited that there were still tips that cheap out there. its 60 for just one though, so it ends up being 120 anyway

robowarrio

I guess I'm tardy to the party on this mod....

pedrocj22

wow not bad i see those tips all the time at auto zone

Dizzle21

Looks great!

iTzVlad

Hey y'all,

I got a 2006 base TL. I know the base bumper won't fit the quads so that's why I'm considering either a Type S or A Spec bumper. As for the quads, these are the ones I'm looking at:

Stainless Steel Dual Exhaust Tips 4 0 2 5 Acura 04 08 TLS 09 11 TL 12 14 TL | eBay

Any good places to find a bumper that would fit these?

Steven Bell

iTrader: (2)

Send a PM to one of our Vendors named AckTL (Bruce). He usually has these.

EL BAN

Probably will fit a base if the Rear ASPEC for a Type S is installed.. If you do it post pics!

TonyN923

Just got mine done, tips from socalmotorsports. I like then but I wish I would have known that due to the base exhaust the tips will come out at an angle and sit low. I should have paid more attention to the pictures posted.
So as a WARNING, if you are OCD these tips will not mount striaght out of the bumper, it will come out at an angle and sit low, if you can live with it then you will be happy. Time will tell if this bothers me enough to buy something new or go back to factory tips.

guitarplayer16

iTrader: (8)

People have been able to mount them fine

Yours look good

TonyN923

Thanks but they come out at an slant and also slant upwards, it's the location of the stock opening on the mufflers, the stock tip has a "S" bend.
I'm sure most won notice but if you look back at the pictures in this thread you will see all the base exhaust with the quad tip has this issue.

guitarplayer16

iTrader: (8)

You're right, I suppose it's because you don't have the rear lip to make it sit better.

TonyN923

actually unless your car was a A-Spec or TL-S from the factory, you will have this issue. i been studying pictures for the last 3 hours lol. I guess no one cares but me but once I tell you, you will notice it.

TonyN923

A-Spec