Fatfrii

i have been looking for 2 hours on here and every time i find a post. the photos have been removed. Im so pissed. can you also state if ur rolled or rub

bluetl04

iTrader: (4)

https://acurazine.com/forums/3g-tl-photograph-gallery-96/just-some-random-pics-855651/

that is a link to a thread that i started....Scroll to the bottom and you will see lots of pics...the blue tl is mine and the grey one is my girls. Her back wheels are 19x9.5 +35...That is all i have to offer you

Italiano

Rubbing is dependent on set up...how low u are, tire size etc... et35 is a safe offset on a 9.5 wheel...if u want flushness then et 22-25 rear and et 30 in the front...but that's a whole another ballgame..

Fatfrii

well i want a balance of flush and safety. what is most important to me is not going inot negative camber to me t looks ugly as well as performs like shit.

i guess my real question is "am i safe to put 9.5 +35mm all the way around"

captain_crunch

Not exactly what you're asking for but here's mine with 18x9 +35. No roll, no rubbing at this height with plenty of space still.

https://acurazine.com/forums/3g-tl-photograph-gallery-96/my-not-so-stanced-wdp-advans-860516/

TWiSDiT

iTrader: (4)

with 235/40 series tires u will have no problem.

Fatfrii

thats regarding the 9.5 or 9?

thanx ofr the picks btw the 9" on +35 looks very flush i think another half inch might be too much. problem is the rims i am interested in go from 8.5 to 9.5 no in between

Italiano

^^^^235/40/18...or 235/35/19....with 8.5 et 35 will be a safe bet....^but if u truly want flush on a 8.5 wheel then front et would be +22 and rear et +9......

vc123

it also depends on ur camber.
if ur dropped with proper (manufacture) camber, 9.5 + 38 with 235/40/18 tires
u will require fender rolling


that's my car with manufacture alignment spec + no gap between tire/fender
with fender rolled
no rub over bump with 2 passengers

dagreenek

iTrader: (2)

19x9.5 +36

235/35/19

Italiano

Gotta run camber on flush fittments for sure...and tire stretching if lowered more then 2 inches....

Fatfrii

yeah i think ill stick to 8.5" too bad the wheels i want dont come in a 9....maybe they will in the future

UA6

You can easily pull off 9.5 with those specs. I'm running 18x9.5 +20 and the rims just poke out a little.

TWiSDiT

iTrader: (4)

sorry for the late response. Its regarding the 9.5. Im running exact setup as vc123 and have no problem (factory alignment specs as well). I can even add a 5mm spacer

oostevey

18x9.5 +35 no rub no problem.

Fatfrii

^any 1 else not seeing these pics?

oostevey

sorry hope these work now

Fatfrii

oem camber or are they tucked? what size tires u got?

cellph titled