Any more, and I need sunblock
06-01-2008, 10:58 PM
#1
Drifting
Thread Starter
Any more, and I need sunblock
As some of you may recall, I have an LED setup in my interior lighting. all 4 dome lights, as well as the two door courtesy lights, have each a bulb with 3 high-powered SMT LEDs. my trunk has a 9 SMT LED module. pics of the old setup are below:
interior:
trunk light:
I bought replacement LEDs from a friend recently. these are five, 24 high power LED modules. I left the license plate and door courtesy lights alone as they were bright enough, but i figured my interior lights needed an upgrade.
so here are the pics i took. they're straight from RAW, no processing.
front domes (my map lights have 5 SMT LEDs before the recent upgrade):
comparison with a stock filament bulb (YUCK)
another angle:
rear domes:
rear domes lit:
views from afar:
doors open:
interior shot:
front shot:
trunk shot:
anybody have some sunblock?
thanks for looking
interior:
trunk light:
I bought replacement LEDs from a friend recently. these are five, 24 high power LED modules. I left the license plate and door courtesy lights alone as they were bright enough, but i figured my interior lights needed an upgrade.
so here are the pics i took. they're straight from RAW, no processing.
front domes (my map lights have 5 SMT LEDs before the recent upgrade):
comparison with a stock filament bulb (YUCK)
another angle:
rear domes:
rear domes lit:
views from afar:
doors open:
interior shot:
front shot:
trunk shot:
anybody have some sunblock?
thanks for looking
06-01-2008, 11:06 PM
#4
Drifting
Thread Starter
Originally Posted by AcuraTLboi
amazing! how much did they cost??
this is one of them in my license plate light. its very bright :
what they look like currently:
06-01-2008, 11:07 PM
#5
Drifting
Thread Starter
Originally Posted by JJaber06
Damn i have my cargo net setup completely wrong 
Looks great though!
Looks great though!
hahaha it took me a while to figure it out when i got the car.
Trending Topics
06-01-2008, 11:30 PM
#8
Unregistered Member
Join Date: Sep 2007
Location: Vancouver
Age: 35
Posts: 1,522
Likes: 0
Received 0 Likes
on
0 Posts
looks crazy man, a quick question, do you just replace the factory interior lights with these LEDs, str8 up plug and play or is ther some modification needed?
06-02-2008, 12:35 AM
#9
Drifting
Thread Starter
Originally Posted by bigBLACKTL
looks crazy man, a quick question, do you just replace the factory interior lights with these LEDs, str8 up plug and play or is ther some modification needed?
06-02-2008, 12:48 AM
#10
Unregistered Member
Join Date: Sep 2007
Location: Vancouver
Age: 35
Posts: 1,522
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sixsixfour
its a straight up plug and play. they come with a wedge type adaptor to fit on the stock sockets.
06-02-2008, 02:07 AM
#16
All the world's a stage
I want that clean white light for my license plate lights like you have. Where can I get the bulbs and for how much? What is the exact part number? Thanks!
06-02-2008, 03:36 AM
#18
Instructor
Isn't it too bright?
I have blue ones from ebay. works fine, but got tired of it and Im thinking about changing it to white ones. but I am kind of worried that it might be too bright.
I am thinking that it might reveal little tiny dirts in the car which wouldnt look so good.
I have blue ones from ebay. works fine, but got tired of it and Im thinking about changing it to white ones. but I am kind of worried that it might be too bright.
I am thinking that it might reveal little tiny dirts in the car which wouldnt look so good.
06-02-2008, 05:02 AM
#19
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
dude that looks awesome, i was thinking of doing these, but feared 1 would go out... they also have some that are twice the side you put on each side... so you'd have double the light output on both sides, dunno if it fits tho rofl
06-02-2008, 08:28 AM
#20
Drifting
Thread Starter
Originally Posted by -sNaFu*
I want that clean white light for my license plate lights like you have. Where can I get the bulbs and for how much? What is the exact part number? Thanks!
06-02-2008, 10:10 AM
#25
Stacking chips.
My license plate leds keep burning out! I like how bright yours look but am afraid the will jus burn out again. Thinking about getting the cold cathold, (*sp?)
06-02-2008, 03:00 PM
#29
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
wow Mr. Lights
06-02-2008, 03:22 PM
#33
Drifting
Thread Starter
Originally Posted by kjelly
Do you have the actual parts number for the trunk light and where I can get it?
06-03-2008, 12:29 AM
#38
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
just in case anyone is interested in the OP's setup... - http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481
06-03-2008, 05:06 PM
#40
NBP+Wash=Full Time Job!
Originally Posted by stillhere153
just in case anyone is interested in the OP's setup... - http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481