wojo1988

So im almost done and need a bit of help from someone! I plan to write up a DIY for all those interested but let me just say that it is by no means an easy task. Ive put in probably minimum of 20 hours on these. The adjustment knobs have to be custom made and welded in and the back of the housing has to be rebuilt. Almost 75% of the rear has to be rebuilt.


Basically Im at a point where I need someones help to wire it up to my car! On the jewel eyes there is one connector with 5 pins.


pin 1 - ground
pin 2 - lows
pin 3 - drl
pin 4 - highs
pin 5 - Does nothing.


I want to make a quick connect so I can connect these right into my factory harness. Whoever helps me out will get my full help with anything to do with the jewel eye retro. Once Im done 100% and they are on the car I will write the DIY detailed with all pictures of the process.

Oh Sickest TL

iTrader: (3)

wow dude those look amazing! good luck

vietxquangstah

iTrader: (7)

Can't offer any help but I'm dying to see some pictures of the cutoff line against a wall at night.

Mojojojo!

Drei

iTrader: (2)

Somebody help wojo quick!

TheChamp531

iTrader: (3)

Do it for me... for minimal cost.

1black_seven

iTrader: (2)

Can't help but there's a guy I know locally who is the best of the best when it comes to auto electrical applications. Even better he owns an extensively customized 3G TL so he is pretty familiar with our cars wiring. I'm certain he would be 100% on board for your project.

Where are you located?

wojo1988

^ thanks but im in Canada. I heard its very easy and not that many wires. If im correct and I just learned I can just connect all the grounds and then match the drl wire on the jewel eyes to the drl positive wire coming from the car? So on with the rest of the wires aswell.

Steven Bell

iTrader: (2)

Looks fantastic.

guitarplayer16

iTrader: (8)

You did all this retrofitting but don't know wiring basics?
I kid, but, yes, that's how it works.

TLin401

!!!!!!!!! Wooooooo !!!!!!!!!!

truonghthe

The cut off looks like a S2k projector with clear lense, sharp with blue hue color near the cut off line.

Steven Bell

iTrader: (2)

I'm so anxious to see these installed.

rockyfeller

iTrader: (6)

Glad you're making progress but is there any valid reason you made a 2nd thread about it? For the most part this has been months of hype. Normally people put a thread up after the mod is done and show pics in retrospect. It seems like you are putting more effort in putting people in suspense than completing your mod.

Not trying to be a jerk btw, I do appreciate the pioneering efforts and you are doing a good job. I just find these threads a bit strange.

luckystrikeed

So sick !! MOre pics !!!

Steven Bell

iTrader: (2)

^^^ That would be a good idea.

20TwozZZZzz

Props!!

slcxow

Looking good! Can't wait to see final results.

bla8291

Bro just stick it in already

TLin401

Steven Bell

iTrader: (2)

^^^^^ LoL.......

thoiboi

Yeah, I can't see why this would pose any issues whatsoever from an purely electrical perspective. I think the only thing to note is whether or not the jewel eyes take a 12V or a 6V input. My assumption would be 12V so you would run into the typical "LED DRL" issue on the 3G meaning the need for a relay harness.

So I guess this is what I would do

pin 1 - ground ground them all together it shouldn't matter it's "COMMON" ground anyway
pin 2 - lows wire up to the positive input of the prior to the ballast
pin 3 - drl wire it up to the positive output of the relay harness (I'd suggest using a 9006 male connector to mate properly with the relay harness output. Ground the negative of the relay harness
pin 4 - highs wire it up to the positive output of the bixenon solenoid.
pin 5 - Does nothing.

I can't see why this wouldn't work! I'm excited to see what you have in store! Good luck!

bla8291

^ That looks correct.

grizzlysamra

Those look amazing in the 3g housing. Can't wait to see them on the car.

RU_JELLY

iTrader: (1)

fawkkkkk

Steven Bell

iTrader: (2)

Waiting.......................patiently.

UA7Marine626

Finally!!

twigglius

iTrader: (6)

So. Much. Win.

oostevey

Paul!!! I gotta see these in person!

Steven Bell

iTrader: (2)

You're bringing this car to the National Meet, right?

javiersanchez06

looks amazing, excellent work!!

Spectra Phantom

Come on man show us already!

Steven Bell

iTrader: (2)

Now he's just playing with us, that tease.......

Spectra Phantom

Dat tease doe

TLin401

I saw a 9th gen Civic on Instagram that completed this mod and it was AMAZING

TLin401

Found it!

guitarplayer16

iTrader: (8)

That's a 8th gen JDM civic or Acura CSX in Canada.

Looks pretty wicked.

justnspace

iTrader: (1)

for some reason; i dont like it in the civic above.

Spectra Phantom

Maybe because the beak complements it

justnspace

iTrader: (1)

at gif

Steven Bell

iTrader: (2)

Those headlights will take some getting used to....