you must get pulled over a lot with all that tint.

so where can i get the aspec suspention and since my tl back is lower than the front can i just buy the front a spec suspention

Looks great! Can you take a few pictures of the ebony wheels? I have heard a few references made about the new color but haven't seen any pics. Do you also have the part number?

Thanks!

car is looking good. from what i see with my car the aspec suspension raises the back a lil while lowering the front a little more. just what ive seen though

I'm also wondering about this!!

You think you could help us out??

First off your car looks great. I take it you installed the kit yourself? If so what was involved? (time, specialty tools, level of mechanical skill, etc...) And, A-spec suspension raises the rear of the car and lowers the front? Please explain this to me Can you tell us your ride height all the way around after the install. Thanks

Are these the tl-s aspec or just aspec they look different. Can you post pics of the wheels I want to see. Btw how much did it cost you and from where did you buy it

Thanks again everyone for the feedback.

kbptypes and as2222,

The measurments from the dead center of the of the bumber to the top of the A Spec kit is 5 1/2" and from the taillights to the top of the kit is 10 1/2".....hope this helps.

SOCalTLtypeS,

Thanks for the compliments. Yes, I installed the kit with a friend of mine this last weekend. There are no specialty tools needed, just a little bit of confidence in knowing that drilling several 3/8" holes in your bumber is an OK thing to do. We took our time and the body kit took about 3-4 hours, just because we didnt want to miss anything. The suspension litterally took about 2 hours total to do, the stock stuff comes off and the new suspension went right back in.

The car sits overall about 3/4" lower than stock. It definately lowers both the front and the back of the car. I have a stereo in the trunk, which maybe added about 1/8" more lowering in the rear. I have an automatic and used the 6Speed A Spec suspension because I wanted the front to be able to sit a little lower. As far as the measurements, it is 26" from the floor to the bottom of the wheel well in the front and 26 1/4" in the rear of the car.

kosstick,

The kit is for the TLS.

Pictures of the wheels and part number:

I keep coming back to this post.... I think I may steal this pic and use it for my desktop wallpaper

haha.. sorry sorry to ruin a perfectly GREAT picture..
but this is the height i was wondering about.

tclavell,

Thanks! Go for it.

as2222,

The measurement is 5 1/2 inches right there.

kosstick,

I got everything from the local Acura dealer---Regal Acura in Lakeland.

Awesome, thanks for the wheel pics!

that is one SWEET TL! we used to live in Lakeland

daymm that tint is DARK

deansblackcls, how much does each rim weigh?

quick question on your rims. does your center caps come unassembled? Meaning is the chrome part not yet attached to the back center cap plate? Since the chrome piece needs to be secured to the plate with two screws, does it have 3m tape on the back to accompany the screws?

dr_brains510,

I am not sure what the weight is on the wheels....sorry.

cali2882,

Yes, the center caps come unassembled and there is some tape on the back of the Acura symbol to assist the screws to hold it on there.

We can meet up in Jacksonville one day if you want. We need a KBP in the group!

WingMan20,

I will be in Jax on the 15th and 16th if you want to meet up. Let me know.

man, car is Sick, georgous...several other adjectives....!!!! i cant wait to see that thing with the A-Spec tires/rims..u plan on getting the A-Spec badge to place on the back?

jeowen,

Thank you very much. I have the A Spec badge, but will not be installing it. I actually debadged the car while it was at the dealership.

15 and 16 sounds good man. Keep in touch until that time. Gonna be nice to have a TL-S WDP, NBP, and KBP.

sweeet...i love that color