Version Base TL ATLP Exhaust
02-03-2008, 01:28 PM
#41
Originally Posted by Fulani has a TL
Ballin' you losin your swagger mannn...
That was the ATLP Quad. This thread was for a new design that would fit into an 04-06 TL and Aspec without having to get the 07TL-S Aspec lip!!!!
That was the ATLP Quad. This thread was for a new design that would fit into an 04-06 TL and Aspec without having to get the 07TL-S Aspec lip!!!!
Ahhh man, I AM losing my swagger
Sorry about that guys
02-04-2008, 03:50 AM
#43
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Are you planning in keeping the tips seperate for a true quad setup, or will they be cosmetic like the porsche? If the tips are divided and meet at the tail, like I told you before, you won't be able to fill the orders since many people will be interested in such a unique setup
Ps. The tubing from the cat to the y pipe will remain unchanged? Would that make this project easier for production purposes?
Ps. The tubing from the cat to the y pipe will remain unchanged? Would that make this project easier for production purposes?
02-04-2008, 08:06 AM
#48
Turd Polisher
iTrader: (1)
I guess I'm the only one who likes what I see. The exhaust tips are definitely different ... for those who are attention whores .. that's your knight in shining armor :- ].
02-04-2008, 08:25 AM
#49
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
angled up JDM style the bellow style half an inch apart 3" tips each, 6.9" from left to right clears the base lip easy, the angle will allow for room to spare
02-04-2008, 11:58 AM
#54
even though i already have ATLP quads, thought id chime in...
If i still had the base rear, i would def prefer squared tips with rounded edges using a similiar muffler + tip design as the quads, meaning angled mufflers + LONG single tips.
IMHO this look is very VIP, if you check out most VIP cars, they run these kind of set ups (long tips angled mufflers). you guys might not be into VIP but i for one think it's sex
If i still had the base rear, i would def prefer squared tips with rounded edges using a similiar muffler + tip design as the quads, meaning angled mufflers + LONG single tips.
IMHO this look is very VIP, if you check out most VIP cars, they run these kind of set ups (long tips angled mufflers). you guys might not be into VIP but i for one think it's sex
02-04-2008, 04:40 PM
#58
Come on aznbo187...u c what every1 wants: single square outlet like our stockers. Just use the ATLP plumbing for the rest.
We want a sleeper setup--nothing crazy...
We want a sleeper setup--nothing crazy...
02-04-2008, 11:33 PM
#60
Tough crowd.
I'll see. I'm limited to the selection of square tips because we do such limited orders.
On the good news, I'm really happy with the results and the way the ATLP J-pipe turned out.
https://acurazine.com/forums/showthr...21#post1953221
I'll see. I'm limited to the selection of square tips because we do such limited orders.
On the good news, I'm really happy with the results and the way the ATLP J-pipe turned out.
https://acurazine.com/forums/showthr...21#post1953221
02-08-2008, 08:20 AM
#62
Sleeper cell
I'm with the square tip crowd. I like the look of the stock tips, and have been wondering when someone was going to come out with the square tip exhaust. I'm definitely in though, and for the J-pipe.
02-08-2008, 09:16 PM
#64
Maybe someone can contact Thermal, Comptech, Mugen, HKS, or Tanabe. We could use the cat-back plumbing from the ATLP and maybe just have one of those guys make the square tip mufflers.
What do you guys think?
What do you guys think?
02-11-2008, 01:41 AM
#72
A-spec steering wheel ftw
Join Date: Jan 2007
Location: Roslyn Heights, New York
Age: 38
Posts: 1,371
Likes: 0
Received 5 Likes
on
5 Posts
in the interim let's see some trapezoid/square tips aznbo!!!
out of curiosity there's no way to make the same exact trapezoid and just have the entire thing be the "hole"/outlet as opposed to the current one that is basically trapezoidal and just small holes with everything filled in? (did that make sense? I'm taking meds and i'm probably high atm)
out of curiosity there's no way to make the same exact trapezoid and just have the entire thing be the "hole"/outlet as opposed to the current one that is basically trapezoidal and just small holes with everything filled in? (did that make sense? I'm taking meds and i'm probably high atm)
02-11-2008, 01:51 AM
#73
There is. It's just you have to take into consideration that this isn't a mass produced unit. Meaning if it's an irregular shape, we have to develop a new set of tools just for this model. If only 20 people are interested, then that additional tooling cost will be reflected onto those 20 units making it more for those people.
I don't want to bore you guys with all the "technicals" but that's just something I want to let you guys know. But ultimately, if nothing looks as good as the oddball shapes..that's what it will be. Quality over quantity.
I don't want to bore you guys with all the "technicals" but that's just something I want to let you guys know. But ultimately, if nothing looks as good as the oddball shapes..that's what it will be. Quality over quantity.
02-11-2008, 04:34 AM
#74
Originally Posted by aznbo187
There is. It's just you have to take into consideration that this isn't a mass produced unit. Meaning if it's an irregular shape, we have to develop a new set of tools just for this model. If only 20 people are interested, then that additional tooling cost will be reflected onto those 20 units making it more for those people.
I don't want to bore you guys with all the "technicals" but that's just something I want to let you guys know. But ultimately, if nothing looks as good as the oddball shapes..that's what it will be. Quality over quantity.
I don't want to bore you guys with all the "technicals" but that's just something I want to let you guys know. But ultimately, if nothing looks as good as the oddball shapes..that's what it will be. Quality over quantity.
http://www.remusexhaustshop.com/seri...549-p-531.html
Not exactly this style but u can exchange the dual for a single hexagonal tip that mates the base. THIS would be perfect!
02-11-2008, 04:39 AM
#75
02-11-2008, 04:47 AM
#76
Remus makes nice products. I've considered the black paint, which can be done but I think it's a bit overly conservative. Another reason why I stuck with the matte finish for the face (polished canister/tips) is so that it will accompany the persona of the TL having a classy look.
Not to mention, it's also not legal to have a polished exhaust canister face in Europe. =P
Not to mention, it's also not legal to have a polished exhaust canister face in Europe. =P
02-11-2008, 09:58 AM
#77
A-spec steering wheel ftw
Join Date: Jan 2007
Location: Roslyn Heights, New York
Age: 38
Posts: 1,371
Likes: 0
Received 5 Likes
on
5 Posts
wow i was tweaked out yesterday LOL, yea quality over quantity i agree!
illegal in europe? what does europe have anything to do with this?
illegal in europe? what does europe have anything to do with this?
02-11-2008, 10:19 AM
#78
Remus looks good.
Just an idea--maybe Remus or ATLP or someone can offer it to Acura as an A-Spec exhaust so it can be mass produced.
Back on topic: trapazoidal/square/rectangular tips ARE possible!
Just an idea--maybe Remus or ATLP or someone can offer it to Acura as an A-Spec exhaust so it can be mass produced.
Back on topic: trapazoidal/square/rectangular tips ARE possible!
02-11-2008, 11:52 AM
#79
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Originally Posted by JCL622
wow i was tweaked out yesterday LOL, yea quality over quantity i agree!
illegal in europe? what does europe have anything to do with this?
illegal in europe? what does europe have anything to do with this?
