RV6 True Dual Exhaust for '04-'08 TL. Accepting deposits now
#361
2004 NBP TL 6MT
Thanks for offering such great products.
Not doing many mods to my DD 04 TL, but will eventually do an RV6 V3 J-pipe and dual exhaust system. Glad the exhaust system came out. I was waiting for it and like your $100 off incentive to purchase both products.
Not doing many mods to my DD 04 TL, but will eventually do an RV6 V3 J-pipe and dual exhaust system. Glad the exhaust system came out. I was waiting for it and like your $100 off incentive to purchase both products.
#364
Senior Moderator
iTrader: (1)
i'm liking the black chrome as well.
#366
Burning Brakes
Black Chrome Iz in da Building and look at all who agree!!!
#369
Veni, vidi, vici
We are half way done with August, but no update pics with Ti Tips
Hey Richie, any progress? You believe you mentioned earlier that you should have a batch comming by the end of August, is this still happening? or are you waiting on more exhuast tips to come in?
I'm moving the end of this month anyway, so i don't mind waiting a lil longer, just wondering if you have any pics
Hey Richie, any progress? You believe you mentioned earlier that you should have a batch comming by the end of August, is this still happening? or are you waiting on more exhuast tips to come in?
I'm moving the end of this month anyway, so i don't mind waiting a lil longer, just wondering if you have any pics
#370
Former Sponsor
Thread Starter
I am looking into black chrome, I admit it does look great. The current place I am looking at wants 3 months to do one batch.
I have so many tips I am tripping over them constantly. Here are a few, again the titanium look a little rough close up. I rather find a supplier with higher quality.
What do you guys think of the stainless tips? They would look great polished up or black chromed.
I have so many tips I am tripping over them constantly. Here are a few, again the titanium look a little rough close up. I rather find a supplier with higher quality.
What do you guys think of the stainless tips? They would look great polished up or black chromed.
#373
contemplating future mods
iTrader: (4)
Not a fan of the stainless ones... sorry.
I say look into the Black Chrome ones previously mentioned. They looked so close to the Stock TL-S tips and would look great.
Personally, I would probably pull my deposit with what I am seeing so far. Keep up the search
I say look into the Black Chrome ones previously mentioned. They looked so close to the Stock TL-S tips and would look great.
Personally, I would probably pull my deposit with what I am seeing so far. Keep up the search
Last edited by Morrissey25; 08-17-2010 at 03:54 PM.
#378
Former Sponsor
Thread Starter
Those would be easy to make. Just have to get them black chrome coated. Does anyone know the diameter of the stock TL-s tips?
#379
contemplating future mods
iTrader: (4)
Here is my eyeball estimation... please don't laugh
It is just to get the idea and my math may be a bit off. I would have a professional give you the correct information
As for the tips, I do like that style but I also like the angled tips that come with stock.
Hope it helps
#380
Former Sponsor
Thread Starter
This is probably the worst rendition but it is what I have to work with.
Here is my eyeball estimation... please don't laugh
It is just to get the idea and my math may be a bit off. I would have a professional give you the correct information
As for the tips, I do like that style but I also like the angled tips that come with stock.
Hope it helps
Here is my eyeball estimation... please don't laugh
It is just to get the idea and my math may be a bit off. I would have a professional give you the correct information
As for the tips, I do like that style but I also like the angled tips that come with stock.
Hope it helps
The exhaust piping will be done this week I should have it ~18 days after that. Right now I am just trying to find some nice tips.
I havent given up on titanium yet but I will look for a nice looking polished stainless and plated black chrome tip as well.
#382
socal WDP
iTrader: (2)
Join Date: May 2008
Location: San Diego/Irvine
Age: 33
Posts: 953
Likes: 0
Received 1 Like
on
1 Post
i think you should just have a longer tip, something that looks more oem because if you have something like the tips you posted above you will see them bend inwards on the side and they will look ... gay
#383
contemplating future mods
iTrader: (4)
Thanks for the sketch. Did you measure the dia of the tips or is it a approximation? Those black chrome M3 tips are only 2.75" dia. They might go well with the base bumper.
The exhaust piping will be done this week I should have it ~18 days after that. Right now I am just trying to find some nice tips.
I havent given up on titanium yet but I will look for a nice looking polished stainless and plated black chrome tip as well.
The exhaust piping will be done this week I should have it ~18 days after that. Right now I am just trying to find some nice tips.
I havent given up on titanium yet but I will look for a nice looking polished stainless and plated black chrome tip as well.
The M3 ones will probably be great for the base... As for the type-s folks... I guess the search continues.
I hope that I am not being a pain in the ass here... Its just a lot of cash and I want it to look classy, proper, and respectable... but mean as hell
#384
Will they clear Brembos?
iTrader: (2)
measurements might be off by 1/16 - 1/8. I just ran out real quick. I measured the circumference and did a little geometry ( C =pi(d) ) and got 3.5... I'm sure that someone will correct me if I am wrong.
The M3 ones will probably be great for the base... As for the type-s folks... I guess the search continues.
I hope that I am not being a pain in the ass here... Its just a lot of cash and I want it to look classy, proper, and respectable... but mean as hell
The M3 ones will probably be great for the base... As for the type-s folks... I guess the search continues.
I hope that I am not being a pain in the ass here... Its just a lot of cash and I want it to look classy, proper, and respectable... but mean as hell
However, you know what is awesome? Someone that is willing to work with the TL community this much while R&D'ing a product of substantial $$$. Even be it something simple like tips, it's what your going to see most everyday. That to me is worth every penny and someone who get my respect over a "This is it, take it or leave it" alternative.
Is my exhaust worn out? No.
Am I going to buy the RV6 setup? Absofrigginlutely
Just my
#387
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 40
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
Damn i haven't lurked the parts and performance section in a long time and then i find this thread! Very nice!
#391
Former Sponsor
Thread Starter
I will try to get some custom rolled tips ordered this week. As for the black chrome will see if someone can do a sample for me.
#393
Burning Brakes
the second one titanium from lower row going left to right those r okay could have them angled sorta like E39 m5 type possibly....but yeah def black chrome FTW and if you can have an exact replica of the Type-S tips then that would be money...either way keep up the good work Richie, at the end of the day I know you will make the Best desicion
#394
Suzuka Master
#396
Instructor
iTrader: (2)
I'm a CAD Engineer so if you need any 3D or 2D drawings on the stock tips I can measure them and give you the exact size. I have a type-s so I'll try to get a rendering together in the next couple of days.
BTW, my vote would be for the black chrome tips in the same size diameter as the stock type-s tips with rolled edges and angle cut (or at least offset) as the stock tips.
BTW, my vote would be for the black chrome tips in the same size diameter as the stock type-s tips with rolled edges and angle cut (or at least offset) as the stock tips.
#397
I'm a CAD Engineer so if you need any 3D or 2D drawings on the stock tips I can measure them and give you the exact size. I have a type-s so I'll try to get a rendering together in the next couple of days.
BTW, my vote would be for the black chrome tips in the same size diameter as the stock type-s tips with rolled edges and angle cut (or at least offset) as the stock tips.
BTW, my vote would be for the black chrome tips in the same size diameter as the stock type-s tips with rolled edges and angle cut (or at least offset) as the stock tips.
#399
Thanks for the sketch. Did you measure the dia of the tips or is it a approximation? Those black chrome M3 tips are only 2.75" dia. They might go well with the base bumper.
The exhaust piping will be done this week I should have it ~18 days after that. Right now I am just trying to find some nice tips.
I havent given up on titanium yet but I will look for a nice looking polished stainless and plated black chrome tip as well.
The exhaust piping will be done this week I should have it ~18 days after that. Right now I am just trying to find some nice tips.
I havent given up on titanium yet but I will look for a nice looking polished stainless and plated black chrome tip as well.
#400
Former Sponsor
Thread Starter
They are around 2.75" I emailed the seller.
I would owe you big time! Have we met? I am around 25 minutes away from Elgin.
I'm a CAD Engineer so if you need any 3D or 2D drawings on the stock tips I can measure them and give you the exact size. I have a type-s so I'll try to get a rendering together in the next couple of days.
BTW, my vote would be for the black chrome tips in the same size diameter as the stock type-s tips with rolled edges and angle cut (or at least offset) as the stock tips.
BTW, my vote would be for the black chrome tips in the same size diameter as the stock type-s tips with rolled edges and angle cut (or at least offset) as the stock tips.
I would owe you big time! Have we met? I am around 25 minutes away from Elgin.