MandrelExhaustSystems.com
#41
Racer
iTrader: (1)
Atlas, how much are you getting mufflers for?
So you basically proved my point in your statement you sell parts for your friends shop meaning you get to do work/get parts for a discount.
Still factoring in the time, margin for error and the fact you actually have to take measuements and ensure a proper fit it's worth it to buy it from a vendor who has already mastered this even if it costs $100 more if you don't see my point I don't understand how you are allowed to drive.
So you basically proved my point in your statement you sell parts for your friends shop meaning you get to do work/get parts for a discount.
Still factoring in the time, margin for error and the fact you actually have to take measuements and ensure a proper fit it's worth it to buy it from a vendor who has already mastered this even if it costs $100 more if you don't see my point I don't understand how you are allowed to drive.
#42
Damn phone and predictive text... ugh
#43
Instructor
iTrader: (1)
If this is for your accord, compatability with the TL's I can't answer and won't argue because I don't know it to well.
Why do you want a 3" compared to a 2.5". I mean obviously it will sound different but have you seen if the difference is worth it?
Sorry for being harsh lol
Why do you want a 3" compared to a 2.5". I mean obviously it will sound different but have you seen if the difference is worth it?
Sorry for being harsh lol
#44
If this is for your accord, compatability with the TL's I can't answer and won't argue because I don't know it to well.
Why do you want a 3" compared to a 2.5". I mean obviously it will sound different but have you seen if the difference is worth it?
Sorry for being harsh lol
Why do you want a 3" compared to a 2.5". I mean obviously it will sound different but have you seen if the difference is worth it?
Sorry for being harsh lol
#46
If you can find someone do to good welding for cheap I would say yes. But you also have the ability to find a exhaust used
#47
The Track Terror
No dyno charts here. But I will have some after its installed. And hopefully pre-muffled and muffled. There are some over on v 6 p . N e t from Accords.
If you can find someone do to good welding for cheap I would say yes. But you also have the ability to find a exhaust used
If you can find someone do to good welding for cheap I would say yes. But you also have the ability to find a exhaust used
#48
3" Vibrant Stealth Mufflers
#51
1st 3g Turbo TL-S
iTrader: (5)
i'll say it again as i did in another thread...
http://www.cmperformanceexhaust.com/
i had them do my setup. 700$, labor, materials. 3" pipes, muffs, tips, everything. True mandrel bent custom system. can't beat their quality to detail either
http://www.cmperformanceexhaust.com/
i had them do my setup. 700$, labor, materials. 3" pipes, muffs, tips, everything. True mandrel bent custom system. can't beat their quality to detail either
#52
Let me upload pics amd videos. And then i will post my review. I did run the car with the 3" exhaust woth no mufflers for a whole week. Was surprised i didn't get pulled over.
#53
So the two videos of car with no mufflers
https://www.youtube.com/watch?v=WMYv...e_gdata_player
https://www.youtube.com/watch?v=6CHG...e_gdata_player
The exhaust need modified...
1.Cut about a foot our of the mid pipe where the flange was.
2. Cut ~2" out of the long section on the Y split.
3. Angle cut the short part of the Y to aim muffler straight
4. Cut and rotated short Y up because muffler aimed down.
Some pics
Last pic you can see two spots were modified above.
Sound clips with mufflers on
https://www.youtube.com/watch?v=QOwf...e_gdata_player
https://www.youtube.com/watch?v=GNcj...e_gdata_player
https://www.youtube.com/watch?v=WMYv...e_gdata_player
https://www.youtube.com/watch?v=6CHG...e_gdata_player
The exhaust need modified...
1.Cut about a foot our of the mid pipe where the flange was.
2. Cut ~2" out of the long section on the Y split.
3. Angle cut the short part of the Y to aim muffler straight
4. Cut and rotated short Y up because muffler aimed down.
Some pics
Last pic you can see two spots were modified above.
Sound clips with mufflers on
https://www.youtube.com/watch?v=QOwf...e_gdata_player
https://www.youtube.com/watch?v=GNcj...e_gdata_player
The following 6 users liked this post by Atlas.46:
350 (11-17-2012),
a beastyUA6 (10-26-2012),
heyitsnickk (11-23-2012),
JCharged (10-27-2012),
LoveMyTL-S (02-08-2018),
and 1 others liked this post.
#56
I'm still debating a resonator. ..
#57
Registered Member
iTrader: (8)
Yeah you can add one to tame it down a little more if you think it's too loud or if there is too much drone. I would look into a Dynomax resonator, I see a couple on their site with a 3.5" inlet/outlet so it will fit over the new exhaust piping without having to modify it.
http://www.dynomax.com/mufflers.php?muffler=racebullet
http://www.dynomax.com/mufflers.php?muffler=racebullet
#63
Advanced
Yes, I bought it this weekend and I will be doing a few changes as I install it. I am not sure of the date when i be getting it, but I will keep you updated....or please ask me if I forget.
#65
Advanced
http://www.mandrelexhaustsystems.com...EXHAUST/Detail
I am going to try to use my 2 stock mufflers....lets see if I can pull it off. I am having trouble finding a reducer, but I might be able to get a custom reducer made. I dont want to have it welded, I want to use clamps. I will take pics of everything as I am putting together and onto my car.
I am going to try to use my 2 stock mufflers....lets see if I can pull it off. I am having trouble finding a reducer, but I might be able to get a custom reducer made. I dont want to have it welded, I want to use clamps. I will take pics of everything as I am putting together and onto my car.
#66
I ordered the 3" and scheduled delivery is on the 20th... yet the ups tracking # they supplied has NO time stamps or anything yet they supposedly shipped it on the 13th ... FML i want this shit nao...
Sounds good Atlas, any exterior sounds with muffler ?
Sounds good Atlas, any exterior sounds with muffler ?
Last edited by DC2many; 02-18-2013 at 11:10 PM.
#67
My first ricer
iTrader: (4)
I wonder how it would sound if you just put one larger muffler in the middle and straight to the tips, instead of paying for 2 mufflers. I still have stock piping but run no rear mufflers and still have the mid and a Dynomax res in place of the stock one. I just can't see the advantage of having 2 unless you want more noise control as long as the muffler is straight through.
#68
Pro
I wonder how it would sound if you just put one larger muffler in the middle and straight to the tips, instead of paying for 2 mufflers. I still have stock piping but run no rear mufflers and still have the mid and a Dynomax res in place of the stock one. I just can't see the advantage of having 2 unless you want more noise control as long as the muffler is straight through.