HKS hi-power exhaust?
02-24-2011, 12:15 AM
#1
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
HKS hi-power exhaust?
Is there anyone with a 3G TL with a HKS hi-power exhaust?
I've seen video clips on youtube. But i was wondering where could i get a hold of one of those exhaust? Any clues?
I've seen video clips on youtube. But i was wondering where could i get a hold of one of those exhaust? Any clues?
02-24-2011, 02:22 AM
#2
Racer
I don't think hks makes a exhaust specifically for the 3g Tl. I think you are
getting confused with people swapping out their mufflers with hks hi powered mufflers. Correct me if I'm wrong.
getting confused with people swapping out their mufflers with hks hi powered mufflers. Correct me if I'm wrong.
02-24-2011, 05:40 PM
#4
Three Wheelin'
I have never had one on my TL but i had one on my RB25 setup in my 240sx and i have never heard a smoother deep exhaust. You have to weld two cans onto another exhaust, which may be expensive!
03-01-2011, 11:27 PM
#7
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
--Maybe thats what i meant. Bc of a video i saw on youtube. It was a white TL-S and it had HKS hi power exhaust and i was wondering how he did that. Because i like that setup!
Trending Topics
03-02-2011, 12:29 AM
#8
Intermediate
Join Date: Nov 2010
Location: 818 Valley of LA
Age: 34
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
03-03-2011, 11:11 AM
#9
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
this is what i plan on doing to my setup there 292 at http://store.sp-power.com/ just get em wielded on
03-03-2011, 11:13 AM
#10
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
So im guessing if i want to do this exhaust set up then i will have to do a custom fit then right? or can i just buy the HKS Hi-Power canisters and install/weld them on?
03-04-2011, 02:16 PM
#12
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
I don't have any sound clips (DSLR camera with no video 
), but here are a few pics installed. ATLP v2 J-pipe, Aeromax resonator, 2.5" piping to the two HKS cans. Sounds beautiful. Nice deep tone under load, no drone. It's actually pretty quiet when just cruising 
), but here are a few pics installed. ATLP v2 J-pipe, Aeromax resonator, 2.5" piping to the two HKS cans. Sounds beautiful. Nice deep tone under load, no drone. It's actually pretty quiet when just cruising
03-07-2011, 09:37 PM
#16
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
NICE! I wanna do the same. So basically custom piping and all that then? Where did u get it done at? Any help if so from where?
03-08-2011, 04:17 PM
#17
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Any exhaust shop should be able to fab one up. Keep in mind, the cost of doing a dual TRUE HKS custom exhaust is still going to be costly.
03-08-2011, 11:09 PM
#18
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
03-08-2011, 11:23 PM
#19
bm = black market.
03-10-2011, 07:21 AM
#21
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
cheapest way is to buy a aftermarket exhaust for cheap on the black market then to have the mufflers welded on. best to take to a real exhaust shop, not a meineke because they are underpaid and do horrible work. reason being they might have to offset the driver side exhaust if i recall.
bm = black market.
bm = black market.
03-10-2011, 07:24 AM
#23
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
03-10-2011, 10:30 AM
#24
Three Wheelin'
First Go on ebay, you can buy the mufflers on there for the cheapest.
Then go to www.mandrel-bends.com and you can get all the piping and bends you need.
Then go to www.mandrel-bends.com and you can get all the piping and bends you need.
03-11-2011, 09:38 AM
#25
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
03-13-2011, 11:58 PM
#26
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
First Go on ebay, you can buy the mufflers on there for the cheapest.
Then go to www.mandrel-bends.com and you can get all the piping and bends you need.
Then go to www.mandrel-bends.com and you can get all the piping and bends you need.
I appreciate it.
03-13-2011, 11:59 PM
#27
Intermediate
Thread Starter
Join Date: Sep 2010
Location: MADISON
Age: 31
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
joflewbyu2
5G TLX (2015-2020)
139
10-08-2015 11:16 AM
