ATLP Quad Exhaust for 2004-2006 Base TL
#161
I used to own a
iTrader: (4)
Bent09, you are in Houston right? You coming out this weekned to D&B? I would really really like to see this and maybe take a ride to hear the cabin noise.
So you have like a '06 rear bumper with a TL-S rear lip? Sorry, I kinda jumped some posts. What do I need to do to my '06 for this to work (I already have factory A-Spec).
So you have like a '06 rear bumper with a TL-S rear lip? Sorry, I kinda jumped some posts. What do I need to do to my '06 for this to work (I already have factory A-Spec).
#162
I used to own a
iTrader: (4)
Originally Posted by RedAggie03
Bent09, you are in Houston right? You coming out this weekned to D&B? I would really really like to see this and maybe take a ride to hear the cabin noise.
So you have like a '06 rear bumper with a TL-S rear lip? Sorry, I kinda jumped some posts. What do I need to do to my '06 for this to work (I already have factory A-Spec).
So you have like a '06 rear bumper with a TL-S rear lip? Sorry, I kinda jumped some posts. What do I need to do to my '06 for this to work (I already have factory A-Spec).
Can someone clarify what needs to be trimmed on the '06 bumper to make the '07 TL-S rear lip fit? Should I just buy a 07 TL-S bumper cover too?
#163
I have car ADD
iTrader: (6)
there is a short DIY write up on how to put the 07+ Aspec lip on the 04-06 bumper.. it requires dremmeling and cutting your bumper. Buying the entire 07+ TL-S rear bumper cover will eliminate that need, but will cost you about $300+ painting of the bumper.... so thats like an extra $500 cost... better off cutting it, or payign a body shop like $200 to make it fit perfectly.
#164
horny =
iTrader: (1)
Originally Posted by BLACKURA_NY
Hey Bent, looks GREAT
What grill are you talking about? something to fill in the rear aspec lip between the exhaust outlets? i think that would look GREAt. and i might try to fabricate something of a mesh style to fill in there... we'll see....
What grill are you talking about? something to fill in the rear aspec lip between the exhaust outlets? i think that would look GREAt. and i might try to fabricate something of a mesh style to fill in there... we'll see....
I called an acura dealer and they said it would be in on Wed. Maybe it is the wrong part number?
If you fab one I would pay.
#165
horny =
iTrader: (1)
Originally Posted by RedAggie03
Bent09, you are in Houston right? You coming out this weekned to D&B? I would really really like to see this and maybe take a ride to hear the cabin noise.
So you have like a '06 rear bumper with a TL-S rear lip? Sorry, I kinda jumped some posts. What do I need to do to my '06 for this to work (I already have factory A-Spec).
So you have like a '06 rear bumper with a TL-S rear lip? Sorry, I kinda jumped some posts. What do I need to do to my '06 for this to work (I already have factory A-Spec).
I bought a painted 07 aspec, cut the stock rear. It is easier to show you.
#167
Originally Posted by bent09
I will be there. This was my first attempt at body work and it was a pain. With that said I can take off a bumper and do another one in about 30 minutes.
I bought a painted 07 aspec, cut the stock rear. It is easier to show you.
I bought a painted 07 aspec, cut the stock rear. It is easier to show you.
Its alot easier to show, than to explain!!!
Looks great bent
#170
Originally Posted by Kennedy
Mike...
When are those ATLP J pipes coming together.
Perhaps you could set up that GB for previous customers and just ship them together with the next round of orders...?
When are those ATLP J pipes coming together.
Perhaps you could set up that GB for previous customers and just ship them together with the next round of orders...?
For the exhausts, they are starting the mandrel bending setup today.
The J-pipe, I'm setting up the dyno before I'd like to finalize production on it. No gain, no pipe...but I did feel a worthwhile difference that put a surprising grin on my face. We'll see how it reflects onto the dyno results.
#171
horny =
iTrader: (1)
Originally Posted by aznbo187
Hey Kennedy, I'm aiming for those J-pipes to be finished at the same time. Hopefully within a month as well. But if the exhaust, or J-pipes finish first, I'd probably ship them out first in order to get the parts out to those who have been waiting for a while already. They will be shipped in different boxes anyway.
For the exhausts, they are starting the mandrel bending setup today.
The J-pipe, I'm setting up the dyno before I'd like to finalize production on it. No gain, no pipe...but I did feel a worthwhile difference that put a surprising grin on my face. We'll see how it reflects onto the dyno results.
For the exhausts, they are starting the mandrel bending setup today.
The J-pipe, I'm setting up the dyno before I'd like to finalize production on it. No gain, no pipe...but I did feel a worthwhile difference that put a surprising grin on my face. We'll see how it reflects onto the dyno results.
#172
'10 Hyundai Genesis Coupe
Originally Posted by bent09
Sounds awesome
I get the grill on Wed.
Did you have to custom paint that aspec lip or were you able to get it painted already? Also are you using an 04~06 bumper or the 07 Type-S?
#173
horny =
iTrader: (1)
Originally Posted by Eoanou
Did you have to custom paint that aspec lip or were you able to get it painted already? Also are you using an 04~06 bumper or the 07 Type-S?
I am using a 04-06 bumper and cut it. The only problem is that there is not a insert for the grill (which I just learned). So that gap will remain until you fab something to fill it in.
#175
horny =
iTrader: (1)
Originally Posted by Fulani has a TL
Bent I'm Stalking ya
But they dont have a grill for the rear????
I haven't had a chance to check it out, but that sucks!!!
But they dont have a grill for the rear????
I haven't had a chance to check it out, but that sucks!!!
The honey comb grill snaps into an 07 tls oem bumper. Then the aspec sits on top of the bumper so the grill you see through the aspec hole is on the oem bumber.
So those of us who have cut the bumper have to fab something.
#177
Originally Posted by robbie82
Anyone have a sound clip or a link to hear what this sounds like? I looked but could not find one anywhere.
http://www.youtube.com/watch?v=-0Key...eature=related
#178
A-spec steering wheel ftw
Join Date: Jan 2007
Location: Roslyn Heights, New York
Age: 38
Posts: 1,371
Likes: 0
Received 5 Likes
on
5 Posts
so the R&D is done for the 04-06 exhaust? or did the thread kind of shift topic? lol
either way, aznbo let's see some pics of what you got/getting/developing
either way, aznbo let's see some pics of what you got/getting/developing
#184
Intermediate
Originally Posted by stillhere153
You should try and fit a type s lip on the rj bumper, would that work?
#185
You should try and fit a type s lip on the rj bumper, would that work?
Hey Mike...
Just checking in on that last batch of quad exhausts.
Just checking in on that last batch of quad exhausts.
#186
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by aznbo187
I'll see how we're doing this Monday for ya. I'm working on a new logo..hopefully the laser etching will be on time as well.
I'll certainly hold out for the new laser etching if it means waiting a few more days.
I just wanted to let you know I was now "ready":
#189
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by ballinfizzle89
That's not the OEM mesh, so I'm guessing either he glued it in? Am I right Chris?
Yep. Used some mirror mastic... It's a thick epoxy kinda shit.
Just taped it on, and laid a glue bead aroud the edge.
It matches my fron grilles... "The drapes now match the rug".
#193
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by aznbo187
Yes, with the 2007 TL-S rear a-spec lip, this exhaust will fit. They are currently being made and should be ready for shipping in a month. 1-26-08
It's now been a month, and I'm ANXIOUSLY waiting my ATLP exhaust...
AND ATLP J-pipe when those come around.
#194
Originally Posted by Kennedy
Anyone heard from Mike in a while?
It's now been a month, and I'm ANXIOUSLY waiting my ATLP exhaust...
AND ATLP J-pipe when those come around.
It's now been a month, and I'm ANXIOUSLY waiting my ATLP exhaust...
AND ATLP J-pipe when those come around.
Exhaust is still on track, we are looking at end of this month/beg. of next month they should be ready to be shipped.
#198
Originally Posted by Kennedy
March 3 2008...
Still waiting, since Christmas. C'mon Mike, get those exhausts in a box please.
As Tom Petty crooned, "The waiting is the hardest part".
Still waiting, since Christmas. C'mon Mike, get those exhausts in a box please.
As Tom Petty crooned, "The waiting is the hardest part".