TLdream

iTrader: (4)

Just a background on what i am doing. I put a 08 TL type S engine in my 97 honda prelude. When coming up with all the parts, i could not find a 07-08 type s ecu with the key. I have succusfully run the 06 3.2 ecu on the motor, it just isnt running to its full potential.

I have a 08 type s ecu, but i dont have the key for it. I am going into honda on Monday to have the immobilizer overide on the ecu performed. Before i can do that, i need to make sure i have the DLC wired correctly. This is how it is currently wired for the 06 ecu.




If someone has some avaialbe time can you please get me a scan of the DLC for the 07-08 ecu (the one pictured above is for an 06, and i have been told the 07-08 needs the CAN wires connected) . It would be greatly appreciated.

Here is my dyno on the 3.2 ecu.

http://www.youtube.com/watch?v=4EHXT3W9suk

TLdream

iTrader: (4)

finally found it. looks like i will have to move pin 14 GRY to pin 1, and add the CAN bus wires WHT to pin 6, and RED to pin 14.

TLdream

iTrader: (4)

Looks like there are other issues. I have the DLC wired according to the 07-08 diagram, and the Honda HDS tool will not recognize the ecu is plugged in when i hook up the 08 unit.. Looks like there are other issues. So anyone saying they used a 07-08 type S ecu, in an earlier year TL is probably not telling the truth.

Gullyguy

Did you fix the problem