HFL CircuitBoard - How many times should you bake the board to see if it will work?
#1
Intermediate
Thread Starter
HFL CircuitBoard - How many times should you bake the board to see if it will work?
'05 TL Navi Auto SSM - HFL went out at 152K. Read through all of the AZ threads on the topic. Tried baking the circuit board at 385 degrees for 9 minutes. Let cool and reinstalled. Nothing. Nada. Still no link (no phone icon on the upper dash). Will accept verbal commands to change radio/CD/EM. Is this a sign that it is time to buy the module new and start? Should I try to bake it again? Any other thoughts on how to get it working without the capital investment? Thanks Group!!
#2
Registered Bunny
You can bake it as many times as you want, worst, it doesn't work.
But the bake trick is to soften the solder and make the parts properly connected again. If the parts are broken, no amount of baking the board will fix it.
But the bake trick is to soften the solder and make the parts properly connected again. If the parts are broken, no amount of baking the board will fix it.
The following users liked this post:
Phil B (06-24-2015)
The following users liked this post:
Phil B (06-24-2015)
#4
Intermediate
Thread Starter
Damned if the second round of baking didn't do the trick. I love this forum! Thanks to all who dealt with this issue before me and came up with a cheap and creative solution. Really appreciative.
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
handsom-hustla
Car Parts for Sale
70
11-13-2015 05:04 PM