Finishing LED Tube from Drivers Side to Passengers Side

Thread Tools
 
Search this Thread
 
Old 07-13-2017, 09:55 PM
  #1  
Intermediate
Thread Starter
 
gopeman's Avatar
 
Join Date: Sep 2016
Location: Detroit, MI
Age: 28
Posts: 38
Received 0 Likes on 0 Posts
Finishing LED Tube from Drivers Side to Passengers Side

Hey everyone! I'm trying to install an LED tube in each of the footwell on my 08 TL base. I got the Module powered in the front drivers side and I'm trying to fish the LED tubes from one side of the car to the other (in the front). Is there an easy way to do this? I tried to fish it through the center panels but it won't go through regardless of where I try to push it through. This is the panel from the front drivers side that I'm trying to fish it through.
Any input is greatly appreciated!
Old 07-17-2017, 11:20 PM
  #2  
Cruisin'
 
Hambizzle1's Avatar
 
Join Date: Sep 2014
Posts: 24
Likes: 0
Received 3 Likes on 3 Posts
Remove the center console. the side panels are pretty easy to come off. probably be less stress in the end. good luck.
Old 07-18-2017, 08:14 AM
  #3  
Senior Moderator
 
thoiboi's Avatar
 
Join Date: Apr 2010
Location: SoCal, CA
Posts: 47,183
Received 8,707 Likes on 6,715 Posts
Can you just get a long drill bit and drill all the way through?
Old 07-18-2017, 08:16 AM
  #4  
Moderator
iTrader: (1)
 
justnspace's Avatar
 
Join Date: Feb 2010
Posts: 86,295
Received 16,264 Likes on 11,973 Posts
If you take it apart, you'll notice there is no space in there. That's why you can't fish it.

It sucked trying to add any type of head unit or aux hardware... literally no space, as it houses electronics and bracing




All times are GMT -5. The time now is 12:18 PM.