splitter
#2
I just finished my own front splitter this week. Just start measuring and see what you can make yourself. As far as I know, no one makes or will probably ever make a perfect fitting splitter for a TL. It's a great DIY.
#5
#6
Rev High; Drive Happy
iTrader: (2)
Joined: Feb 2008
Posts: 4,076
Likes: 398
From: Scarborough, Ontario
I made my own based off of the s2000 Mugen lip/splitter back in June.
I stopped working on it for a month... but it's more-or-less completed.
It just needs to be remade or wrapped in CF and it's completed.
It is attached to my a-spec-front-replica.
pictures are in one of my threads i made a while back about CanAm.
edit: I shouldn't actually say 'made' but I rather... modded the S2000 Mugen lip/splitter. A lot of custom fabbing was done to make it long enough for the TL and fit with the front a-spec. Essentially it's half poly-urethane [from the s2k lip] and half fiberglass [from my fabbing].
p.s: i also drew very very rough mock-ups in a thread about rear-diffusers... in which i also posted mock-ups of.
I stopped working on it for a month... but it's more-or-less completed.
It just needs to be remade or wrapped in CF and it's completed.
It is attached to my a-spec-front-replica.
pictures are in one of my threads i made a while back about CanAm.
edit: I shouldn't actually say 'made' but I rather... modded the S2000 Mugen lip/splitter. A lot of custom fabbing was done to make it long enough for the TL and fit with the front a-spec. Essentially it's half poly-urethane [from the s2k lip] and half fiberglass [from my fabbing].
p.s: i also drew very very rough mock-ups in a thread about rear-diffusers... in which i also posted mock-ups of.
Last edited by o4Komodo; 08-23-2010 at 09:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Yumcha
Automotive News
4
09-15-2015 06:44 PM
Yumcha
Automotive News
3
09-14-2015 10:48 AM