Ron A....need your help if you can.
#1
Pro
Thread Starter
Join Date: May 2004
Location: Southern Cali.
Age: 52
Posts: 534
Likes: 0
Received 8 Likes
on
2 Posts
Ron A....need your help if you can.
I was just wondering in your infinite library of scans if you have any instructions on how to get to the junction box behind the glove box to the area that has the tweeter wire separations.
Someone mentioned in another thread that there is a box behind the glove box that is where the splits are for the tweeter wires.
From what I have seen with people removing the glove box to get to change the cabin air filter, there is a plastic 'wall' behind the glove box when you remove it. Is what I am wondering is if there is a way to remove that 'plastic' wall.
Thanks in advance.
Someone mentioned in another thread that there is a box behind the glove box that is where the splits are for the tweeter wires.
From what I have seen with people removing the glove box to get to change the cabin air filter, there is a plastic 'wall' behind the glove box when you remove it. Is what I am wondering is if there is a way to remove that 'plastic' wall.
Thanks in advance.
#2
I went through the whole audio section of the service manual, and I didn't find anything like you are looking for.
I did scan these pages with the circuit diagrams, in case there is something in there that might help..
I did scan these pages with the circuit diagrams, in case there is something in there that might help..
Thread
Thread Starter
Forum
Replies
Last Post
jterp7
3G MDX (2014-2020)
9
02-03-2016 08:34 PM
lanechanger
Member Cars for Sale
4
10-13-2015 10:56 AM