Help attaching front license plate holder
#1
Instructor
Thread Starter
Help attaching front license plate holder
Hey Folks,
I'm in MA, so I'm supposed to have my front license plate .
I think I understand how to attached the holder, but I'm just confirming. I pop out the two disks from the front bumper and screw the two pan head screws through the plastic behind those disks, right? Basically these screws are self tapping.
I see another hole in the middle of the top part of the holder, but I don't have any screw supplied for it, and there isn't anything in the bumper which would lead me to believe that I'm supposed to screw that part in. What holds the holder on the top? Seem to me like it's too loose.
Thanks!
I'm in MA, so I'm supposed to have my front license plate .
I think I understand how to attached the holder, but I'm just confirming. I pop out the two disks from the front bumper and screw the two pan head screws through the plastic behind those disks, right? Basically these screws are self tapping.
I see another hole in the middle of the top part of the holder, but I don't have any screw supplied for it, and there isn't anything in the bumper which would lead me to believe that I'm supposed to screw that part in. What holds the holder on the top? Seem to me like it's too loose.
Thanks!
#2
Yep, just those two screws on the bottom. The plate and holder aren't that heavy that you really need anything on the top; just don't try using the front plate as a step when washing the hood.
#3
Instructor
Thread Starter
Originally Posted by kfhughes
Yep, just those two screws on the bottom. The plate and holder aren't that heavy that you really need anything on the top; just don't try using the front plate as a step when washing the hood.
#7
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Originally Posted by Jesstzn
I'm looking for the bumper plugs but in WDP.
Last resort is to order them from a dealer - not really expensive; ~$11 each.
Trending Topics
#9
Suzuka Master
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,600 Likes
on
1,581 Posts
Originally Posted by Jesstzn
I'm looking for the bumper plugs but in WDP.
#10
Advanced
Join Date: Jul 2006
Location: Biloxi, MS
Age: 60
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ReD-BaRoN
I do worry about vibration of this holder, and it messing up the front bumper.
I live in MS where a front tag is not required, and yet I run counter to most opinions on this board, in that I PREFER a front tag/holder on my car. I learned this when I accidentally backed into another car that crept up close behind me in a parking lot a few years back. His front tag/holder saved his front bumper from damage and thus saved me from an insurance claim (also minimized the damage to my rear bumper).
My front tag/holder on my TL has already saved me from more sever damage when I got zinged by a large road stone that flew up in front of me while driving...the tag/holder took the brunt of it.
#11
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Originally Posted by kfhughes
.... just don't try using the front plate as a step when washing the hood.
I just wonder how short someone must be for this idea to even occur?
#12
Originally Posted by Bearcat94
I just wonder how short someone must be for this idea to even occur?
Thread
Thread Starter
Forum
Replies
Last Post
darksky
3G TL Problems & Fixes
2
09-05-2015 03:11 AM
Mugen TSX
Eastern Canada
0
09-01-2015 11:05 PM