Aspec Kit Install - Portland/Seattle Area
#1
Three Wheelin'
Thread Starter
Aspec Kit Install - Portland/Seattle Area
I'm heading down to Portland in the next couple weeks and figured it would be a good time to pickup the Aspec Kit (from Heeltoe).
I would like to have the kit installed, instead of lugging it back across the border to Canada.
Does anyone have any contacts that can install the kit for a decent price.....when I say decent.....I've been quoted anywhere from 400-450 for installation (from Heeltoe and Portland/Seattle dealerships), which is ridiculous.
Thanks!
I would like to have the kit installed, instead of lugging it back across the border to Canada.
Does anyone have any contacts that can install the kit for a decent price.....when I say decent.....I've been quoted anywhere from 400-450 for installation (from Heeltoe and Portland/Seattle dealerships), which is ridiculous.
Thanks!
#2
Race Director
iTrader: (8)
Parking lot, 2-3 hours, screwdrivers, socket set, compact drill, bring a friend.
Drive back to Canada, enjoy the new look.
Remove all bumper bolts/screws prior to making the trip, use anti-seize on everything and put the bolts back - just so you know you're not gonna run into trouble when you're in a parking lot.
Or ask around in the Seattle Regional board and see if you can work together on a driveway. Don't forget to bring beer.
If you ask a shop, you will most likely be charged an hourly rate. It will take around 2-3 hours to install.
Good luck, been there done that and was worth the savings opposed to buying here in Canada.
Drive back to Canada, enjoy the new look.
Remove all bumper bolts/screws prior to making the trip, use anti-seize on everything and put the bolts back - just so you know you're not gonna run into trouble when you're in a parking lot.
Or ask around in the Seattle Regional board and see if you can work together on a driveway. Don't forget to bring beer.
If you ask a shop, you will most likely be charged an hourly rate. It will take around 2-3 hours to install.
Good luck, been there done that and was worth the savings opposed to buying here in Canada.
#3
Three Wheelin'
Thread Starter
yeah I did it with my base...ordered the kit to my po box and drove it over. Had a friend install for me.
might just have to do it again, but this time save the shipping costs since I'bb be in Portland to pick it up.
Its too cold out to do it in a parking lot...
appreciate the input though
might just have to do it again, but this time save the shipping costs since I'bb be in Portland to pick it up.
Its too cold out to do it in a parking lot...
appreciate the input though
Thread
Thread Starter
Forum
Replies
Last Post
bonknhead
2G TL (1999-2003)
3
08-15-2006 03:14 AM
Kwangmin
1G TSX Performance Parts & Modifications
5
05-17-2004 02:44 PM