Acura Front Bumper Decal and Clear Bra
#1
Acura Front Bumper Decal and Clear Bra
For those who have the Veneerz.com Acura front bumper decal, what do ya'll think? How long have you had it? I'm concerned it will peel off after car washes.
Also, anybody have the decal and then put a clear bra over it? What are your experiences with the decal and clear bra?
Also, anybody have the decal and then put a clear bra over it? What are your experiences with the decal and clear bra?
#3
Racer
Join Date: Mar 2005
Location: Streamwood, IL
Age: 55
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smoothie97
For those who have the Veneerz.com Acura front bumper decal, what do ya'll think? How long have you had it? I'm concerned it will peel off after car washes.
Also, anybody have the decal and then put a clear bra over it? What are your experiences with the decal and clear bra?
Also, anybody have the decal and then put a clear bra over it? What are your experiences with the decal and clear bra?
Here is a pictures of the problem lettering. The letters in the photo below the bumper lettering were the first set I received. The letters above the bumper lettering were the replacement set. I only have a picture of the letters "C" and "U" because the others fit fine. Ignore the adhesive behind the tops of the letters...I didn't stick them on properly because this was just staged for a picture to send to Veneerz.
#4
Pro
FYI, all the TL front bumpers are new for '07 (TL Base and TLS).
I suspect those letters will fit 04-06 bumpers just fine, but it appears the ACURA letters are a different size on the '07 bumper (at least they are on the TLS as your picture shows).
Want to verify that? Park next to an earlier year and just measure the lettering on both to compare.
I suspect those letters will fit 04-06 bumpers just fine, but it appears the ACURA letters are a different size on the '07 bumper (at least they are on the TLS as your picture shows).
Want to verify that? Park next to an earlier year and just measure the lettering on both to compare.
#5
Whoa...thanks for the warning guys. Yeah, the C and U aren't even close to fitting. I was about to shell out the $21 for the Veneerz. But I guess I'll wait until they design new letters to fit 2007 models, as I also have a stock 2007 TL-S.
#6
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Originally Posted by Smoothie97
Whoa...thanks for the warning guys. Yeah, the C and U aren't even close to fitting. I was about to shell out the $21 for the Veneerz. But I guess I'll wait until they design new letters to fit 2007 models, as I also have a stock 2007 TL-S.
I'll let you know how it goes.
http://cgi.ebay.com/ebaymotors/O4-07...QQcmdZViewItem
Trending Topics
#8
Racer
Join Date: Mar 2005
Location: Streamwood, IL
Age: 55
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bearcat94
Well, I just bought the Domed Decal's on fleabay and called out in the PayPal notes that I had an '07 Type-S. Then when I saw this sent them a very specific e-mail for them to make sure they know I've got the Type-S. Gave them an out if they want to back out.
I'll let you know how it goes.
http://cgi.ebay.com/ebaymotors/O4-07...QQcmdZViewItem
I'll let you know how it goes.
http://cgi.ebay.com/ebaymotors/O4-07...QQcmdZViewItem
#9
Banned
Join Date: Nov 2003
Location: Internet USA
Age: 54
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Speaking from experience the clear bra will not go into that area on the bumper. If someone tried to put it down there it would peel up, bubble and not look smooth unless. they cut the Acura logo out for it alone. You should be just just fine
#10
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Originally Posted by Bearcat94
Well, I just bought the Domed Decal's on fleabay and called out in the PayPal notes that I had an '07 Type-S. Then when I saw this sent them a very specific e-mail for them to make sure they know I've got the Type-S. Gave them an out if they want to back out.
I'll let you know how it goes.
http://cgi.ebay.com/ebaymotors/O4-07...QQcmdZViewItem
I'll let you know how it goes.
http://cgi.ebay.com/ebaymotors/O4-07...QQcmdZViewItem
Originally Posted by carguyrob
That link you attached actually says it will fit in the indentions of a 04/06 TL. If the letters actually changed for 07, you might have the same issue I had.
Yeah, I know. If you look at the Listing it is '04 - '07. Description is '04 - '06.
Thats why I specified my car type. I got a reply e-mail today. Basically, "We've sold lots of '07 with no problems." So, I've got to trust they know they're own product.
If not, I've got a lot of back up to make a case for refund.
#11
06 TL 6spd. Navi/A-spec
I ordered mine for my 06 tl from verneerz and i was very satisfied with the fitment all the letters fit perfectly. Ive only had mine on for a few weeks now they seem to be holding up pretty good. When i installed them i made sure to clean the surface well with isopropyl alcohol, hope that will make them stick a little better and last longer! Here is a pic of them...
#12
2006 TL MT RJ BodyKit
Join Date: Apr 2006
Location: Canada
Age: 45
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Is it just me or are you not trying to use the "U" as the "C" and the "C" as the "U"?
Just rotate them 90 degrees...I think they will fit fine...keep in mind all we have to look at is the pic.
Is it just me???
Just rotate them 90 degrees...I think they will fit fine...keep in mind all we have to look at is the pic.
Is it just me???
Originally Posted by carguyrob
I actually purchased the Veneerz lettering for the front of my TL-S and was pretty unimpressed with the quality of the letters...they looked really cheap. On top of that, the "C" and the "U" in ACURA were not even close to a correct fit. I complained to Veneerz customer service. About 2 weeks later, I received a new set of letters that were even worse than the first set. The overall letters were not the right thickness and were too narrow for the indentations in the front bumper. Veneerz customer service kept insisting that my car must have an aftermarket front bumper (it is just a stock TL-S). After a lot of complaining on the phone, they finally credited me for the purchase.
Here is a pictures of the problem lettering. The letters in the photo below the bumper lettering were the first set I received. The letters above the bumper lettering were the replacement set. I only have a picture of the letters "C" and "U" because the others fit fine. Ignore the adhesive behind the tops of the letters...I didn't stick them on properly because this was just staged for a picture to send to Veneerz.
Here is a pictures of the problem lettering. The letters in the photo below the bumper lettering were the first set I received. The letters above the bumper lettering were the replacement set. I only have a picture of the letters "C" and "U" because the others fit fine. Ignore the adhesive behind the tops of the letters...I didn't stick them on properly because this was just staged for a picture to send to Veneerz.
#14
Godfather of Chrome
Join Date: Dec 2006
Location: Santa Cruz, and yes I'm a hippie with retro 1970s sideburns and a chrome fetish
Age: 46
Posts: 1,297
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Steeve
Is it just me or are you not trying to use the "U" as the "C" and the "C" as the "U"?
Just rotate them 90 degrees...I think they will fit fine...keep in mind all we have to look at is the pic.
Is it just me???
Just rotate them 90 degrees...I think they will fit fine...keep in mind all we have to look at is the pic.
Is it just me???
#15
Originally Posted by Steeve
Is it just me or are you not trying to use the "U" as the "C" and the "C" as the "U"?
Just rotate them 90 degrees...I think they will fit fine...keep in mind all we have to look at is the pic.
Is it just me???
Just rotate them 90 degrees...I think they will fit fine...keep in mind all we have to look at is the pic.
Is it just me???
That would be hilarious if they were just the wrong letters. I'll give the OP the benefit of the doubt that he tried to switch the C and U, but if not, his face will be the color of his car.
I wish I wasn't in NY and my license plate didn't have to block that awesome logo. I am sure there are mods to move the plate somewhere else, but noting easy enough for me to do.
#16
Well, carguyrob....we are all waiting to know if you accidentally transposed the "U" and "C"! Let us know soon! Because if you did and discover that the fit is good, I'll be ready to order them from Veenerz for my 07 TL-S.
#17
Racer
Join Date: Mar 2005
Location: Streamwood, IL
Age: 55
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smoothie97
Well, carguyrob....we are all waiting to know if you accidentally transposed the "U" and "C"! Let us know soon! Because if you did and discover that the fit is good, I'll be ready to order them from Veenerz for my 07 TL-S.
I am actually not going to turn red over this one because they actually do come pre-stuck on a card in order...apparently just the wrong order...both times.
Order away. And be prepared to switch the letters around as necessary.
#18
Pro
AWESOME catch Steeve!!! Really, we should ALL feel a little red-faced for not seeing that.
Glad to hear it fits. Also NOT glad. I've been on the fence about these things...do it or don't do it...I was almost releived to hear the letters wouldn't fit my bumper. NOW I'm stradding the rail again.
Carguyrob...can you shoot a few shots of the letters mounted? Would love to see what they look like on MRP.
Glad to hear it fits. Also NOT glad. I've been on the fence about these things...do it or don't do it...I was almost releived to hear the letters wouldn't fit my bumper. NOW I'm stradding the rail again.
Carguyrob...can you shoot a few shots of the letters mounted? Would love to see what they look like on MRP.
#20
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Funny. I got the Domed Decal set off of Ebay today. I noticed the same thing - the "C" and "U" look very similar and you've got to get the right one in the right place.
The Ebay decals fit fine on an '07 TL-S.
The Ebay decals fit fine on an '07 TL-S.
#21
I've got a Silver Type-S. Anybody have pictures of the Ebay Domed Decal "Bright Silver" or "Brushed Aluminum" colors? I want the color that most closely matches the chrome on the grill.
Bearcat94: Your picture doesn't show up btw.
Bearcat94: Your picture doesn't show up btw.
#22
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Originally Posted by Smoothie97
I've got a Silver Type-S. Anybody have pictures of the Ebay Domed Decal "Bright Silver" or "Brushed Aluminum" colors? I want the color that most closely matches the chrome on the grill.
Post #23 is cleaned up
https://acurazine.com/forums/ramblings-12/one-fukd-up-bum-nyc-160472/
Originally Posted by Smoothie97
Bearcat94: Your picture doesn't show up btw.
Thanks. Fixed it.
#25
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Originally Posted by Smoothie97
I've got a Silver Type-S. Anybody have pictures of the Ebay Domed Decal "Bright Silver" or "Brushed Aluminum" colors? I want the color that most closely matches the chrome on the grill.
https://acurazine.com/forums/showthr...hlight=Brushed
#26
Racer
Join Date: Mar 2005
Location: Streamwood, IL
Age: 55
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ChicagoBurbs
AWESOME catch Steeve!!! Really, we should ALL feel a little red-faced for not seeing that.
Glad to hear it fits. Also NOT glad. I've been on the fence about these things...do it or don't do it...I was almost releived to hear the letters wouldn't fit my bumper. NOW I'm stradding the rail again.
Carguyrob...can you shoot a few shots of the letters mounted? Would love to see what they look like on MRP.
Glad to hear it fits. Also NOT glad. I've been on the fence about these things...do it or don't do it...I was almost releived to hear the letters wouldn't fit my bumper. NOW I'm stradding the rail again.
Carguyrob...can you shoot a few shots of the letters mounted? Would love to see what they look like on MRP.
#28
Racer
Join Date: Mar 2005
Location: Streamwood, IL
Age: 55
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smoothie97
Are the veneerz decals domed or just flat?
#31
Originally Posted by brettallica
That's a good point, but my guess is that the letters came pre-stuck in sequence, so that such a mistake couldn't be made. Ya know? Definitely good looking out...and it would be very interesting to see whether this is what the problem is, to say nothing of completely shocking.
haha, i think you made a good point and that he is using the letters backwards
#32
Kaa - Ching !!!
Join Date: Nov 2006
Location: Rhode Island.....Self-Proclaimed Chromed Cousin of Brettallica
Age: 58
Posts: 1,718
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by carguyrob
I have never seen the eBay ones so I can't comment on them...
Thread
Thread Starter
Forum
Replies
Last Post
Oakes
Wash & Wax
10
10-12-2015 11:17 AM
asahrts
Member Cars for Sale
0
09-04-2015 05:55 PM
robowarrio
Car Parts for Sale
2
09-01-2015 09:25 PM