The 3G Ramblings & General Discussion Thread (Part 2)
Registered Bike Offender
iTrader: (3)
Taco, I gave a similar piece of feedback to my Acura dealer when they gave me a list of dishonest recommendations. They also said they would call me back, but never did.
Honestly, I can't really blame the brand for this (I can blame the brand for a lot of other shit though). At the end of the day, this is just people. Maybe this behavior is motivated by their salary/commission structure. Or maybe they're just dickheads. Either way, these people often move around from dealership to dealership - so if they're not doing it at Acura, they're doing it elsewhere. I often dream of how rich I would be if I opened up an honest dealership or auto service business. Too bad I would get fed up with it after probably a year or two.
Honestly, I can't really blame the brand for this (I can blame the brand for a lot of other shit though). At the end of the day, this is just people. Maybe this behavior is motivated by their salary/commission structure. Or maybe they're just dickheads. Either way, these people often move around from dealership to dealership - so if they're not doing it at Acura, they're doing it elsewhere. I often dream of how rich I would be if I opened up an honest dealership or auto service business. Too bad I would get fed up with it after probably a year or two.
Chapter Leader (Southern Region)
Somebody posted that trailer earlier, can't remember where. Definitely a badass project. I understand that it's low-budget, but some things are just ridick..
Chapter Leader (Southern Region)
also... @going to stealership and not getting what you expected
At least you didn't pay.. did you?
At least you didn't pay.. did you?
The following users liked this post:
civicdrivr (11-17-2014)
Chapter Leader (Southern Region)
Also taco.. you might consider that the recall specifies that they drain the system out first from the return line, not just res. If they didn't, it would be a violation of proper recall protocol. You should also be aware that even if they did do this and replaced the fluid that was drained, it could still be nearly as dark as it was before.
Chapter Leader (Southern Region)
So.. one... if they didn't do it properly, that's fraud and a liability.. and deux, if they did do it properly.. you can't expect them to do multiple drains and fills on their dime. Add'l time nor fluid is reimbursed by corporate because they were already in there.
Moderator
iTrader: (1)
found my leak; exactly where majofo said it would be.
took off the crank pulley and found a bunch of oil
in true spaceman fashion; I fucked something up tho.
I decided to take off the accessory pulley's this time.
if ya'll recall, i ddint change out the accessory pulley's because I couldnt get them off.
found a six sided 14mm and got to work on one of them. but since my ratchet is pretty big, I didnt notice that it would hit the frame when I was backing out the bolt.
now the ratchet is there permanently. it's stuck between a rock and a hard place.....
I'll have to loosen the front and rear mounts to see if the engine has enough play to get the ratchet out of there.
took off the crank pulley and found a bunch of oil
in true spaceman fashion; I fucked something up tho.
I decided to take off the accessory pulley's this time.
if ya'll recall, i ddint change out the accessory pulley's because I couldnt get them off.
found a six sided 14mm and got to work on one of them. but since my ratchet is pretty big, I didnt notice that it would hit the frame when I was backing out the bolt.
now the ratchet is there permanently. it's stuck between a rock and a hard place.....
I'll have to loosen the front and rear mounts to see if the engine has enough play to get the ratchet out of there.
Last edited by justnspace; 11-17-2014 at 04:35 AM.
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
The following users liked this post:
EL BAN (11-17-2014)
Resident BMW Apologist
I'm a bit late on the congrats train, but... congrats on the new job J!
Ryan and I turned $75 into many, many calories on Friday evening in prep for Turducken:
The party was a great time, tons of food and all of it was quality. We spent yesterday on the couch... it's not often that either of us consumes a few thousand calories of just pork products, cheese and beer and we needed a bit of a breather.
And now it's a rainy/cold Monday. Blech. Probably time to throw the all-seasons on the 128i, we're expecting a bit of snow/slush this Friday.
Any ideas for Acura/TL-related Christmas gifts? He wants a remote starter but those are $$$ for a good one. Can't really swing a $400 gift.
Ryan and I turned $75 into many, many calories on Friday evening in prep for Turducken:
The party was a great time, tons of food and all of it was quality. We spent yesterday on the couch... it's not often that either of us consumes a few thousand calories of just pork products, cheese and beer and we needed a bit of a breather.
And now it's a rainy/cold Monday. Blech. Probably time to throw the all-seasons on the 128i, we're expecting a bit of snow/slush this Friday.
Any ideas for Acura/TL-related Christmas gifts? He wants a remote starter but those are $$$ for a good one. Can't really swing a $400 gift.
The following 3 users liked this post by Brake_L8:
Whats up with RDX owners?
iTrader: (9)
Mmmmm bacon
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Thanks Jake. Looks like a great time!
All weather mats and/or trunk tray for the TL? Those are a must, especially in those conditions.
Resident BMW Apologist
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Stick shift, right?
Three Wheelin'
Join Date: Sep 2014
Location: Shreveport, La.
Age: 43
Posts: 1,572
Likes: 0
Received 177 Likes
on
160 Posts
Good Monday morning to all! I had forgotten about the bacon cheese jalapeño dip until now. Sounds like y'all had a great time Jake. Hope everyone had an enjoyable weekend!
Team Owner
Mojo, no, I didn't end up paying the dealer to do it. I ended up just doing it myself.
Also, today has turned out to be a shitty start to the week. I tried fixing my Nav yesterday, by using one of those lens cleaning DVDs. After multiple tries, nothing changed. Dammit. Unfortunately for me, I was an idiot and left the keys in the car, on II, only to come into the garage this morning and finding a dead battery. Fuuuuuuuu.
Also, today has turned out to be a shitty start to the week. I tried fixing my Nav yesterday, by using one of those lens cleaning DVDs. After multiple tries, nothing changed. Dammit. Unfortunately for me, I was an idiot and left the keys in the car, on II, only to come into the garage this morning and finding a dead battery. Fuuuuuuuu.
Last edited by TacoBello; 11-17-2014 at 10:18 AM.
Whats up with RDX owners?
iTrader: (9)
Flat plane crank
The following 2 users liked this post by civicdrivr:
Majofo (11-17-2014),
rockstar143 (11-17-2014)
Team Owner
Vlad, I know dealerships are greasy as hell. A friend of mine is the General manager of a huge Ford dealership here in town. After switching dealerships and dealership companies several times over, just chasing the dollar. I can't believe the type of people involved in sales- he was the sales manager at one point at one of the Honda dealers here, and he said of the dozen guys working for him, 10 of them had criminal records, lol. There was also a porn star that worked as a sales lady, and a stripper too. Then there was the chick that was nailed by everyone in the dealership, male and female lol. Guys would just pass around photos of themselves plowing her. She didn't seem to care.
And the greasy tactics all these dealers put to use is mind boggling. I hate dealerships with a passion. If it wasn't for the recall, I wouldn't have even bothered going in.
And the greasy tactics all these dealers put to use is mind boggling. I hate dealerships with a passion. If it wasn't for the recall, I wouldn't have even bothered going in.
Senior Moderator
Morning, slores.
Whats up with RDX owners?
iTrader: (9)
Team Owner
Does anyone know how to remove the DVD navi drive out of the trunk? Gonna send mine in for repair...
Chapter Leader (Southern Region)
found my leak; exactly where majofo said it would be.
took off the crank pulley and found a bunch of oil
in true spaceman fashion; I fucked something up tho.
I decided to take off the accessory pulley's this time.
if ya'll recall, i ddint change out the accessory pulley's because I couldnt get them off.
found a six sided 14mm and got to work on one of them. but since my ratchet is pretty big, I didnt notice that it would hit the frame when I was backing out the bolt.
now the ratchet is there permanently. it's stuck between a rock and a hard place.....
I'll have to loosen the front and rear mounts to see if the engine has enough play to get the ratchet out of there.
took off the crank pulley and found a bunch of oil
in true spaceman fashion; I fucked something up tho.
I decided to take off the accessory pulley's this time.
if ya'll recall, i ddint change out the accessory pulley's because I couldnt get them off.
found a six sided 14mm and got to work on one of them. but since my ratchet is pretty big, I didnt notice that it would hit the frame when I was backing out the bolt.
now the ratchet is there permanently. it's stuck between a rock and a hard place.....
I'll have to loosen the front and rear mounts to see if the engine has enough play to get the ratchet out of there.
Mojo, no, I didn't end up paying the dealer to do it. I ended up just doing it myself.
Also, today has turned out to be a shitty start to the week. I tried fixing my Nav yesterday, by using one of those lens cleaning DVDs. After multiple tries, nothing changed. Dammit. Unfortunately for me, I was an idiot and left the keys in the car, on II, only to come into the garage this morning and finding a dead battery. Fuuuuuuuu.
Also, today has turned out to be a shitty start to the week. I tried fixing my Nav yesterday, by using one of those lens cleaning DVDs. After multiple tries, nothing changed. Dammit. Unfortunately for me, I was an idiot and left the keys in the car, on II, only to come into the garage this morning and finding a dead battery. Fuuuuuuuu.
Vlad, I know dealerships are greasy as hell. A friend of mine is the General manager of a huge Ford dealership here in town. After switching dealerships and dealership companies several times over, just chasing the dollar. I can't believe the type of people involved in sales- he was the sales manager at one point at one of the Honda dealers here, and he said of the dozen guys working for him, 10 of them had criminal records, lol. There was also a porn star that worked as a sales lady, and a stripper too. Then there was the chick that was nailed by everyone in the dealership, male and female lol. Guys would just pass around photos of themselves plowing her. She didn't seem to care.
And the greasy tactics all these dealers put to use is mind boggling. I hate dealerships with a passion. If it wasn't for the recall, I wouldn't have even bothered going in.
And the greasy tactics all these dealers put to use is mind boggling. I hate dealerships with a passion. If it wasn't for the recall, I wouldn't have even bothered going in.
Chapter Leader (Southern Region)
I'd try to get a flat head between the ratchet and the socket. Then drive it off the socket, use a hammer on the end of the flathead if you need to.
Moderator
iTrader: (1)
I'll see if the flat head can hit the switch
its too tight to fit the flat head inbetween the socket and ratchet....
Team Owner
Can you actually fix the DVD drive, or are you just yanking my chain? I'm not buying a new one... They're like $3500. I figure sending it to Alpine is probably my cheapest bet, but even that's gonna cost me about $600. Sigh.
Chapter Leader (Southern Region)
600.. fuck that noise. Are you talking about the head unit or the nav unit?
Moderator
iTrader: (1)
^dvd nav unit.
I jinxed him
I jinxed him
Chapter Leader (Southern Region)
If it's the nav / drive unit, that's an easy fix if you're up for it.
Team Owner
Looking for more info...
I'll be pulling the drive unit tonight and will open it up to clean the lens by hand. I have a feeling that the DVD lens cleaning disc didn't do much.
I could hear the unit spinning the disc, so I don't think the drive motor is the problem.
I have very faint scratches on my disc and I'm wondering if it's the drive that caused them or if the previous owner did. They are super fine scratches though- to me it seems crazy that the drive wouldn't be able to read the disc, as I've seen some rough discs get played through all kinds of drives without issues. I don't even think I can get a photo of them, they're so fine.
Which leads me back to thinking the lens is dirty.
Is there a way to adjust something in the drive to keep the disc from scratching? No idea how Alpine does that. From what I've read, other members had a clear ring form on their discs from the scratching, mine definitely doesn't have that.
I'll be pulling the drive unit tonight and will open it up to clean the lens by hand. I have a feeling that the DVD lens cleaning disc didn't do much.
I could hear the unit spinning the disc, so I don't think the drive motor is the problem.
I have very faint scratches on my disc and I'm wondering if it's the drive that caused them or if the previous owner did. They are super fine scratches though- to me it seems crazy that the drive wouldn't be able to read the disc, as I've seen some rough discs get played through all kinds of drives without issues. I don't even think I can get a photo of them, they're so fine.
Which leads me back to thinking the lens is dirty.
Is there a way to adjust something in the drive to keep the disc from scratching? No idea how Alpine does that. From what I've read, other members had a clear ring form on their discs from the scratching, mine definitely doesn't have that.
Team Owner
Chapter Leader (Southern Region)
It's not a lens issue. It's more than likely a board issue. Take it apart, check the board connections for cracks on the substrate or loose connections. If they all look good it's probably the main board that drives the lens. Find the P/N and order it online.
The following users liked this post:
justnspace (11-17-2014)
Team Owner
Computer/electrical knowledge > me.
Moderator
iTrader: (1)
take apart the drive.
if you see what majofo stated (cracks in board/fried capacitors/loose connections), replace board by finding part number on board.
it'll say Part #: askdhagf12934283947
then google said part #
and it will give you a place to buy
The following users liked this post:
TacoBello (11-17-2014)
Team Owner
Thanks guys. I will report back with what I figure out.
Chapter Leader (Southern Region)
It's not even alpine. I'm sure their shit is from an ODM. I'm 99% sure it's a generic board. It might have an Alpine OPN but below that should be the ODM PN.
The following users liked this post:
justnspace (11-17-2014)
Chapter Leader (Southern Region)
Just take some pics and we'll guide your cock..
Team Owner
Chapter Leader (Southern Region)
A hole is a hole I say..
Chapter Leader (Southern Region)
learned dat from UGK from Pocket full of stones.. #rippimpc
The following users liked this post:
justnspace (11-17-2014)