So this just happened - furious!!!!
#2
So you were there when it happened? Good thing since if you weren't around they probably would have just taken off. I always remind my kids to open the doors slowly and be careful not to hit other cars.
#5
That's disgusting. People are such selfish self-centered tools.
The side molding would not have helped you there. At least the guy gave you his insurance. I would imagine other folks might just look at you and brush it off.
The side molding would not have helped you there. At least the guy gave you his insurance. I would imagine other folks might just look at you and brush it off.
Last edited by oblio98; 07-25-2018 at 05:38 PM.
#6
Yeah im glad he caught me. I would have been flipping the fuck out if he had bailed. His kid is in my daughters dance class so he wouldn’t have gotten far lol
Trending Topics
#9
Even if they do a perfect repair job, you'll always know it's there and look at it as an imperfection. Very sad.
#10
#11
I would be wigged out, as I'm sure most on this site would be. We care about our cars. That said, it will be fixed. And at the end of the day, it's a first world problem plus you don't have to pay for the repair. Breath deep. Tomorrow will look better. It seems every time I get a new car, within a month or so something happens to ding it. My current car was hit by a highway rock that skipped across my hood like throwing a skipping rock across a lake. My previous Q5 had a cement chunk dropped on its hood (second day of ownership) from a near by construction site. I didn't see it until the next morning and either way I'd have trouble proving it. My high deductible meant--out of pocket. Life goes on. I tell myself it's why they make more cars.
#14
Well I already have a check from the dudes insurance. They estimated $680 for repair. No PDR, just repairing and repainting the panel. They have to drop the bumper cover and wheel liner, take out some trim and glass pieces to make sure they get the whole panel painted and cleared and blended. I took it to an Acura dealer and their assessment was the same.
doesnt seem like enough to me but whatever overages his insurance will cover.
2 day job likely.
I have a couple PDR guys I want to look at it as well.
More to come....
doesnt seem like enough to me but whatever overages his insurance will cover.
2 day job likely.
I have a couple PDR guys I want to look at it as well.
More to come....
#15
So one PDR company says they can get it out PDR. My good buddy who does body work and PDR for a Honda dealer said he could but doesn’t thnk it’ll be factory good. So he wants to repair and paint but here’s the kicker. Their shop can’t match the paint because they don’t have that toner available (his dealership is too cheap to buy the good products). So the Alex blue pearl is so new and different than it’s going to be tough to find a shop that can match it. This has me leaning towards the PDR option because I don’t want an obvious mismatched panel.
#17
this. I call it parking in a dent free zone. Of course we’ve had ours 2 weeks now, and my wife parked in spot next to a cart return and opened the back door into a rail. Just a small chip in the door edge thank goodness.
#18
i was literally parked, took my daughter in to dance and back out in under 2 minutes.
Had it not been pouring I wouldn’t have even parked in a spot I would have pushed her out on a fly by.
#19
I parked 3/4 over the left line all the way on the end of a row where nobody could park in the driver side and you had almost 2 spots on the passenger side. Dipshit still parked within striking distance 😂
i was literally parked, took my daughter in to dance and back out in under 2 minutes.
Had it not been pouring I wouldn’t have even parked in a spot I would have pushed her out on a fly by.
#20
Well I already have a check from the dudes insurance. They estimated $680 for repair. No PDR, just repairing and repainting the panel. They have to drop the bumper cover and wheel liner, take out some trim and glass pieces to make sure they get the whole panel painted and cleared and blended. I took it to an Acura dealer and their assessment was the same.
doesnt seem like enough to me but whatever overages his insurance will cover.
2 day job likely.
I have a couple PDR guys I want to look at it as well.
More to come....
doesnt seem like enough to me but whatever overages his insurance will cover.
2 day job likely.
I have a couple PDR guys I want to look at it as well.
More to come....
So one PDR company says they can get it out PDR. My good buddy who does body work and PDR for a Honda dealer said he could but doesn’t thnk it’ll be factory good. So he wants to repair and paint but here’s the kicker. Their shop can’t match the paint because they don’t have that toner available (his dealership is too cheap to buy the good products). So the Alex blue pearl is so new and different than it’s going to be tough to find a shop that can match it. This has me leaning towards the PDR option because I don’t want an obvious mismatched panel.
It looks like the edge of the other cars door must have hit it right on that crease. What a shame on a new car.
#21
So one PDR company says they can get it out PDR. My good buddy who does body work and PDR for a Honda dealer said he could but doesn’t thnk it’ll be factory good. So he wants to repair and paint but here’s the kicker. Their shop can’t match the paint because they don’t have that toner available (his dealership is too cheap to buy the good products). So the Alex blue pearl is so new and different than it’s going to be tough to find a shop that can match it. This has me leaning towards the PDR option because I don’t want an obvious mismatched panel.
#22
IMO: PDR, on that dent, next to impossible, to return to even semi factory line. A really good PDR Tech, could (POSSIBLY) make it un-noticeable, from 10 feet, but YOU would always look at, and see the imperfection, immediately! I would wait, until I found a shop, that could blend the paint, to match!
#23
After taking it to multiple shops, I think I’ve decided to go to the PDR place that specializes in that and has great reviews and 40 years of experience. It seems as though the body shops want to tear out the floating glass trim and the actual glass itself, won’t paint the bumper, and they’ll blend to the door. With the apex blue being so new and a special type of toner they would have to special order I don’t trust them to do a good enough job that’s unnoticeable. I would rather have a 99% result from PDR and maybe, maybe have a minor blemish that only I would see, than to have a noticeable paint flop from the panel to the bumper. If it was on the rear door, and they were blending just doors, that would be less of an issue but I just don’t think painting it is a good idea. There is no “broken” paint or clear coat so the PDR guy is 100% confident that the factory paint will remain in tact and the results will be near perfect. They have been known to work magic and every body shop I went to recommended them if I decided to do PDR. Worst case is I end up having to do a traditional repair but from what I gathered from two separate PDR places and 3 body shops (including one that specializes in exotic high end cars like Lambo, Porsche, Ferrari’s etc), along with the dealer is that PDR is a better option than repainting since I prefer a less invasive approach and a bad paint job is hard to fix.
#24
IMO: I think your taking the best approach. If doable, PDR is always the better option. Even a VERY high quality painter, CANNOT perfect match paint! If you think about it, temperature, humidity, paint tint, metallic particle, shape and size, percentage of thinner, and dryer, gun distance from the surface, air pressure, nozzle design, etc., would all have to be identical, to the factory procedure, in order to obtain a PERFECT match. Yours, is a VERY difficult dent, to address. Can't wait to hear how it turns out.
#26
That sucks! one can never completely avoid these situations, but's its why i practice defensive parking, one tenet being parking as far away from where most people park. More walking and fewer door dings (touch wood). Especially on a windy day.
#28
#29
So the PDR guy attempted to get to it. Thru the tail light was a no go because there’s no hole to get to it. Through the wheel well wasn’t an option because they would need to drill through the sheet metal brace which is right below the dent. They found a small hole in the frame near the bumper but weren’t able
to reach it without taking the bumper off. So it looks like PDR isn’t really an option without drilling and I don’t want to drill especially in the wheel well and expose it to road salt and water with potential to rust. I dont care If they seal it, still exposed in my mind.
so back to square one and probably going traditional repair route and just taking a small chance on the paint.
to reach it without taking the bumper off. So it looks like PDR isn’t really an option without drilling and I don’t want to drill especially in the wheel well and expose it to road salt and water with potential to rust. I dont care If they seal it, still exposed in my mind.
so back to square one and probably going traditional repair route and just taking a small chance on the paint.
#30
So the PDR guy attempted to get to it. Thru the tail light was a no go because there’s no hole to get to it. Through the wheel well wasn’t an option because they would need to drill through the sheet metal brace which is right below the dent. They found a small hole in the frame near the bumper but weren’t able
to reach it without taking the bumper off. So it looks like PDR isn’t really an option without drilling and I don’t want to drill especially in the wheel well and expose it to road salt and water with potential to rust. I dont care If they seal it, still exposed in my mind.
so back to square one and probably going traditional repair route and just taking a small chance on the paint.
to reach it without taking the bumper off. So it looks like PDR isn’t really an option without drilling and I don’t want to drill especially in the wheel well and expose it to road salt and water with potential to rust. I dont care If they seal it, still exposed in my mind.
so back to square one and probably going traditional repair route and just taking a small chance on the paint.
There are some really masterful body and paint techs out there.
Good luck.
#31
So I’m still dealing with this. The PDR guy I went to today after 3 weeks of phone tag didn’t want to try glue pulling it cuz he’s convinced it won’t work. I am not expecting perfection on a PDR job and I do think it will get damn close to 100% with the right guy. As proof of how easy this metal is to work, I took it upon myself to pull the dent to about 80% with a rubber suction cup from a fucking $6 shower caddie. If I can get it to her with a suction cup, then surely a better tool and a skilled craftsman can get this taken care of.
#33
This dent is in the worst possible spot.
Last edited by Dizzyg12; 08-25-2018 at 07:23 PM.
#36
Exactly! My wife thinks I’m crazy because I don’t party in the closest spots and instead park out in no-man’s land and/or where someone can only park on one side of me. It’s inevitable that dings and scratches will happen but I do my best to prevent as many as possible.
#37
Also do you need to be a dealer or certified tech to register for that site?
#38
can you find out if there’s access to the passenger rear quarter panel from inside the cargo area? Got a dent and looking for access for PDR - I’m thinking the only option is removing the interior trim and subwoofer box.
Also do you need to be a dealer or certified tech to register for that site?
This is the best I could find, but I don't know how much it helps you:
#39
Anyone can subscribe. They offer either a day, month, or year subscription. https://techinfo.honda.com/rjanisis/logon.aspx
This is the best I could find, but I don't know how much it helps you:
This is the best I could find, but I don't know how much it helps you:
to get a tool in there to pop it from the inside if we were to remove the bumper, or is that square area boxed up and containing anything? See where I marked on the diagram the location of my dent, right on that body line.