Cameras wont work
04-03-2019 | 02:00 PM
#1
Thread Starter
1st Gear
Joined: Apr 2019
Posts: 1
Likes: 0
Cameras wont work
I have a 2017 Acura Truck MDX SH-AWD 3.5L FI SOHC 6cyl. I had a windshield crack and had it replaced at a place that said they could do it, but the windshield may need to be recalibrated. When I went to calibrate the camera for the car at the dealer they stated, that since the windshield was not OEM, the calibration would not work. They tried it, and then the car cameras stopped working. Also, a DTC code came up C0041, after they tried to calibrate it. They stated that since the windshield was not an OEM, the calibration failed. I took the car back to the windsheild replacement place and they had recently obtained OptiAim and they could recalibrate the windshield. They were able to successfully recalibrate it but now the cameras don't seem to display. Everything else is functional. The lane assist. The ADAS, The proximity alert. They all work. Just not the display of the cameras.
We had the C0041 cleared by the dealer and the calibration redone, but the cameras still state they need to be reaimed.
Any idea?
We had the C0041 cleared by the dealer and the calibration redone, but the cameras still state they need to be reaimed.
Any idea?
04-03-2019 | 06:34 PM
#2
Drifting
Joined: Feb 2001
Posts: 2,637
Likes: 117
From: Ontario, Canada
I have a 2017 Acura Truck MDX SH-AWD 3.5L FI SOHC 6cyl. I had a windshield crack and had it replaced at a place that said they could do it, but the windshield may need to be recalibrated. When I went to calibrate the camera for the car at the dealer they stated, that since the windshield was not OEM, the calibration would not work. They tried it, and then the car cameras stopped working. Also, a DTC code came up C0041, after they tried to calibrate it. They stated that since the windshield was not an OEM, the calibration failed. I took the car back to the windsheild replacement place and they had recently obtained OptiAim and they could recalibrate the windshield. They were able to successfully recalibrate it but now the cameras don't seem to display. Everything else is functional. The lane assist. The ADAS, The proximity alert. They all work. Just not the display of the cameras.
We had the C0041 cleared by the dealer and the calibration redone, but the cameras still state they need to be reaimed.
Any idea?
We had the C0041 cleared by the dealer and the calibration redone, but the cameras still state they need to be reaimed.
Any idea?
Thread
Thread Starter
Forum
Replies
Last Post
Roblee23
2G TL Problems & Fixes
25
08-22-2018 08:14 PM
Jah08RL
2G RL Audio, Bluetooth, Electronics & Navigation
7
03-27-2017 08:37 PM