Dan00313

I'm having a hard time making a wheel decision based on the fact that there aren't any 2nd gens out there with either of these wheels. They will be going on my 2010 PWP for reference. I can't tell if the 2nd gen looks better with a lip or with a concave multi spoke look. I have attached pics for your viewing pleasure, so let me know which you prefer or better yet if oddly enough you have these wheels POST PICS! If I go with the works they will be black with a polished lip as pictured below. If I get Weds, they will either be matte gray or gloss black.

Work Meister S1






Weds SA55M

princelybug

iTrader: (16)

Can't lose either way. The Weds are more sporty.

ttk5

work meister work meister. Although the new SA55's are very very sick also.

ed_423

i say sa55's! im not really feeling the works

CU2MIKE

You'd need 20 inch works to make it look like they are 19s..... And I don't think it looks that nice.

Dan00313

That's one thing I worried about with this style wheel it always looks a size smaller then it Really is. I do really love the lip though.

5thTo2nd

Those works are hideous. The SA55's will be so much nicer on a 2G

Dan00313

What I like about the works....huge lip, and thick spokes to hide the puny brakes of the TSX. I like the Weds because they are more sporty looking, but have tiny spokes which shows a lot of ugly brake. Also the paint on the weds tends to chip very easily due to the design of the spokes. I'm still torn

ed_423

i just dont think the works fit the cu2, and if u dont like the brake, have you thought of getting new slotted roters and stuff? or if u like thick spokes, maybe some volks te's?

Alee:)

Works!

tobwac

Weds SA55M

Dan00313

I thought of the TE's since they are one of my favorite wheels, but I had them on my last car so I was thinking something a little different. I contemplated a BBK but I dont see myself doing a brake upgrade for a long while. I personally don't think slotted rotors make it look any better but thats just my opinion. I wish I could see what either of these look like on a CU2.

Prototype

I can picture the 2G TSX go either way, You'll need a PHAT lip for the Work Meisters and do the 'hellaflush' them to look right IMO, though.

On the other hand, the 2G TSX looks pretty dope with a 'race' type wheel. Look up the Realtime 2G TSXs for reference. I'm pretty sure the RPF1s on the 2G TSXs are 17x8 +35 or +38 and possibly running spacers

5thTo2nd

Like ed said if the brakes are the problem then BBK it up. You should get someone to photoshop those rims if you're still considering them

Mr. NC

Work Meister, classic lines never fail

TSteezyX

WedsSport's

Meister's would look awful on a TSX.

Euronoob

Weds!

DerwoodEE

x2

Those Meisters don't belong on a sedan.

godfather2

Do work

johnclancy01

those works are butt ugly, do the weds

Dan00313

Don't think I'm doing either anymore...most likely TE37.

ed_423

^ i'd love to see some te's on the cu2

Dan00313

Me too, just hope I can get them to fit....18x9.5 +22

ed_423

^make them fit

jwr0ng626

iTrader: (1)

TE or varrstoens? lol do it!

Dan00313

Volks why do you say varrstoens? Not into knock offs.

jwr0ng626

iTrader: (1)

^ lol just a less expensive alternative.

TE would def look better tho

24boosted

Did the OP get either? I was hoping to see pics of either on the TSX.

ed_423

^ me too. but op seems to disappeared afterwards.

SinCityTLX

The weds are cool, but the Works are absolutely terrible looking. Almost looks like the deep dish wheels they sell at pep boys that gardeners drive around.

ua6-spec

if u like lip get the 3pc work sp1. the step lip style is sickkk!
. i would only go with the works if u wanna go with that vip or hella flush style. coilovers would be a must for perfect height, the weds are nice but it more .. simple?

2010plattsx

weds...i went with 18" forgestars. i like that look on 2nd gen.

ttk5

Which forgestars did you buy? I've been looking at them too.

2010plattsx

I have the 18x8.5 F14's in matte black on my 2010 palladium TSX. I had them weighed and each one is 17.8lbs. If you do get them be patient it takes a while. They make them as the orders come in. I can tell you this it is definately worth the wait! I will post a picture when I figure out how. I am new to the whole forum thing.

Euronoob

Ooo, looking forward to the pictures!
You could use an uploading site like www.imageshack.us?

ed_423

how much did you get them for? im looking at 19's F14's. they are sick in gunmetal...

mrstak

iTrader: (1)

Weds all the way. The Works look hideous imo...

2010plattsx

I paid 1400 for the set, that includes delivery.

tobwac

cant wait for pics

2010plattsx

pics are in garage cant seem to get them on this thread.