Welp, here it is.
I've been around these forums for a little while and haven't ever shared pictures.
I don't have very many good pictures yet... Part of my TSX experience was diligently pursuing Acura to rebuild the motor under the oil consumption TSB. It took months, but they finally agreed. Once it warms up I will get some better pictures. Here it is some time after I first bought it and after I had a chance to detail it. https://cimg7.ibsrv.net/gimg/acurazi...50c17e291a.jpg Couldn't have people creepin' on me at red lights, so I got some 16% tint. https://cimg2.ibsrv.net/gimg/acurazi...c4cfb2e137.jpg After a bath... https://cimg3.ibsrv.net/gimg/acurazi...019d50c8a6.jpg https://cimg4.ibsrv.net/gimg/acurazi...4d92df3aa7.jpg Random garage photo... Keep in mind, all these pictures were taken from my phone and not my DSLR. Forgive the low quality. https://cimg6.ibsrv.net/gimg/acurazi...98742315d5.jpg Dirty rims after installing powerstop z23 kit... https://cimg2.ibsrv.net/gimg/acurazi...69d26e8f18.jpg Injen cold air intake... If it makes you feel better, the engine bay is no longer dirty. https://cimg6.ibsrv.net/gimg/acurazi...97beff4b8e.jpg Ohio is cold this time of the year. I'll give her a spring cleaning and set up some artsy photoshoots. If I end up keeping this and not getting a V6 the mods left on the list are (and not in any particular order): RV6 PCD, custom exhaust using magnaflow mufflers and vibrant ultraquiet resonator, flashpro with vitviper tune, Koni sports, Tein h-tech/s-tech, 18" OEM wheels, various audio projects... and other things as I get the urge. Thanks for your time and I'll update as updates occur. |
About time! Looks great :)
|
Damn I thought my 20% tint was dark lol. look forward to seeing some mods. Even if you trade to a v6, I would imagine you would do the same things. More or less?
|
Originally Posted by Rdub81
(Post 15696273)
Damn I thought my 20% tint was dark lol. look forward to seeing some mods. Even if you trade to a v6, I would imagine you would do the same things. More or less?
It really hinges on my girlfriend wanting to take mine. If she doesn't I may add the supercharger to the mod list. |
Haha sweet!
|
whaaaa someone else from Ohio?
I'm in Columbus, where are you located? |
Originally Posted by ssjoeboe9
(Post 15696884)
whaaaa someone else from Ohio?
I'm in Columbus, where are you located? |
ahhhh that's too bad lol
|
how do you like those power stops and CAI?
|
Very clean looking car... I have to keep my vehicles tinted also.
|
Originally Posted by devinv1994
(Post 15699283)
how do you like those power stops and CAI?
The brakes work much better than the stockers did, and don't wear out as quickly. No heat fade. Instant bite. Minimal rust. I've had the CAI on and off half a dozen times while troubleshooting the oil consumption. There certainly is a difference not only in sound but responsiveness. Can't say it makes it much quicker, if at all, but I think higher up in the RPMs it is noticeable. |
using too much oil or?
Originally Posted by t3hhcaptain
(Post 15699837)
Love them both.
The brakes work much better than the stockers did, and don't wear out as quickly. No heat fade. Instant bite. Minimal rust. I've had the CAI on and off half a dozen times while troubleshooting the oil consumption. There certainly is a difference not only in sound but responsiveness. Can't say it makes it much quicker, if at all, but I think higher up in the RPMs it is noticeable. |
Originally Posted by devinv1994
(Post 15705035)
using too much oil or?
First, lets agree a "normal, healthy" engine will use some oil over the course of 5,000 - 10,000 miles. Since the engine was rebuilt under the TSB warranty by Acura, I've put roughly 10,000 miles on. In about 6,000 miles it had consumed under a quarter of a quart in oil. I've replaced it and have gone another ~ 4,000 miles and I have used 0. Actually, I overfilled it a bit. Oops! That wasn't a problem pre-rebuild because it would be gone in a couple days. I'm going to actually need to measure out 0.3 of a quart so I don't overfill, because it stays... And bulges the seals... |
Originally Posted by t3hhcaptain
(Post 15696907)
Cincinnati. :toocool:
You're braver than me with the tint, I kept mine legal at 50% Car looks nice and clean |
Originally Posted by mrsparkle666
(Post 15706042)
I'm in Cincy too, west side.
You're braver than me with the tint, I kept mine legal at 50% Car looks nice and clean Also I'm east side, the best side. :tomato: |
Actually, I had an officer harass me about tint just about a year ago.. it was 6:15am (still dark) and he was trying to tell me my tint was too dark, and then I asked him what the laws were for all 6 windows, and he kept spouting off 50% for the front, and then gave me a warning for the tint and handed me a speeding ticket :/
|
I hear cbus officers are ... strict...
|
It was my first ticket of my entire life! 79mph in a 70 smh
|
I am from NJ and have 20% all around, front windshield has none. I have a few cop friends who tell me most of the time you won't get pulled over for it, and it mostly is a secondary offense. When its sunny out, from certain angles, and with the sun roof visor open, it doesn't look too bad.
I've seen several cars with 5% and other mods that would attract more attention (obnoxious wheels, camber, odd color headlights, etc.). My car looks stock other than the LED interior and license plate lights which now make it just have that luxury look. I also have a clean driving record and have been pulled over maybe 3 times in my 11 years of driving. I know the risks, but love my tint regardless. |
Originally Posted by Eggs999bacon
(Post 15706882)
I am from NJ and have 20% all around, front windshield has none. I have a few cop friends who tell me most of the time you won't get pulled over for it, and it mostly is a secondary offense. When its sunny out, from certain angles, and with the sun roof visor open, it doesn't look too bad.
I've seen several cars with 5% and other mods that would attract more attention (obnoxious wheels, camber, odd color headlights, etc.). My car looks stock other than the LED interior and license plate lights which now make it just have that luxury look. I also have a clean driving record and have been pulled over maybe 3 times in my 11 years of driving. I know the risks, but love my tint regardless. |
Originally Posted by t3hhcaptain
(Post 15707219)
Yeah, I think if you aren't obviously modded they will probably leave you alone. I think its just a stereotyping thing. ssjoeboe probably looks like trouble. :tongue:
WAZE has become my best friend these days haha |
Originally Posted by ssjoeboe9
(Post 15707326)
Probably lol
WAZE has become my best friend these days haha |
Did a detail job in the parking lot over the weekend.
https://cimg5.ibsrv.net/gimg/acurazi...ee44cde0bf.jpg |
You know it's clean when a white car is acting like a mirror. Great job!
|
Originally Posted by xtcnrice
(Post 15730919)
You know it's clean when a white car is acting like a mirror. Great job!
I did a wash, bar of clay, glaze, polish, sealant, carnauba wax, and a spray wax on top of that. Edit: The "polish" was actually a cleaner glaze and sealant... figured what the hell though, might as well use it all. Did it all by hand as well. I'm looking into cordless polishers. |
Originally Posted by t3hhcaptain
(Post 15730923)
Thanks man!
I did a wash, bar of clay, glaze, polish, sealant, carnauba wax, and a spray wax on top of that. Edit: The "polish" was actually a cleaner glaze and sealant... figured what the hell though, might as well use it all. Did it all by hand as well. I'm looking into cordless polishers. |
Originally Posted by xtcnrice
(Post 15731789)
Well damn that must've taken you the whole day! I did it by hand once, and ever since I've moved onto a Griot's Garage 6" DA polisher lol. I use it for polish/compound as well as wax application.
|
Originally Posted by xtcnrice
(Post 15731789)
Well damn that must've taken you the whole day! I did it by hand once, and ever since I've moved onto a Griot's Garage 6" DA polisher lol. I use it for polish/compound as well as wax application.
|
Yep I've downsized the bp as well. I'm using 3 different Lake Country Hydro-Tech pads with Meg's UC and M205. Car is a 2013 and I'm the original owner, so I skipped M105 thinking the paint couldn't have been THAT messed up from the factory :tongue:
|
I bought the DA with the LC kit and have some Chemical Guys Hexlogic foam pads from another starter kit, but never took a liking to them. They didn't seem to give the best finish with the CBP. The MF cutting and finishing pads give me the best results. ... Maybe CBP is just that finicky?
|
clean car. did it come with the side body molding or did you install it yourself?
|
noticed you dropped a yellow top in. how is it for you
|
Originally Posted by RxCU2_JSG
(Post 15740133)
clean car. did it come with the side body molding or did you install it yourself?
Originally Posted by urbanstereo
(Post 15740469)
noticed you dropped a yellow top in. how is it for you
|
Finally have an update to share! I decided to go with the Koni yellows, Eibach prokit, and an Ingalls rear camber kit. I had them all installed by a local performance suspension shop, aptly named Performance Alignment. They did a great job and have a plethora of knowledge and experience. I am very happy with the install and alignment.
I haven't been able to put the new shocks/springs through the curves, but I have toyed around with it a bit and it is a clear upgrade from stock. It helps a lot with body control, keeping it flat and responding better through corners. Still very comfortable as my daily driver! I imagine the next suspension upgrade will be the Progress rear sway bar. I see there are some optional links for it, but I probably will just get the sway bar at first. I also am considering the spherical compliance bushings down the road. Also on the list is custom exhaust, rv6 PCD (though I see some have mentioned possibly a high flow version of this for the i4? Someone was welding one in I think??), and flashpro. I may get the flashpro first and do the base reflash before getting the other addons. I recently swapped out the license plate bulbs, interior dome lights and courtesy lights to some Philips LED bulbs. Very nice white light, doesn't have hot spots, and isn't blinding. I have used vleds interior lights before and found them to be way over powered and limiting their practicality. I am much happier with the Philips bulbs. I'm trying to find a good place to do some industrial style photos, as I wanted to do over the summer. I need to ask a couple lot owners and hopefully get some good DSLR photos soon! No more mods until next summer, probably. https://cimg0.ibsrv.net/gimg/acurazi...c445a3613a.jpgkoni yellows and eibach prokit https://cimg1.ibsrv.net/gimg/acurazi...4248d9e60c.jpgkoni yellows and eibach prokit https://cimg2.ibsrv.net/gimg/acurazi...e06bd35255.jpgkoni yellows and eibach prokit https://cimg3.ibsrv.net/gimg/acurazi...637b8f2276.jpgkoni yellows and eibach prokit The red mazda 3 GT hatchback is also ours. It is my girlfriends daily driver. Really impressive bang to buck ratio. |
Looks great captain!
If you don't mind me asking, where'd you get the philips interior lights from? Also, what temperature are they? I suggest you do Progress RSB before exhaust, that way if you do decide to go custom, you can work around the RSB. In my case, I have the GReddy Supreme SP and the flange that connects the (left?) muffler to the Y-pipe + right muffler was hitting the Progress RSB. I had to extend the exhaust a bit outwards, so that the flange would no longer touch the RSB. Something to consider. |
Originally Posted by xtcnrice
(Post 15878711)
Looks great captain!
If you don't mind me asking, where'd you get the philips interior lights from? Also, what temperature are they? I suggest you do Progress RSB before exhaust, that way if you do decide to go custom, you can work around the RSB. In my case, I have the GReddy Supreme SP and the flange that connects the (left?) muffler to the Y-pipe + right muffler was hitting the Progress RSB. I had to extend the exhaust a bit outwards, so that the flange would no longer touch the RSB. Something to consider. You can order the bulbs from Amazon. They are 6000k. Here is a handy dandy chart I agree - it would be a good idea to do the RSB before an exhaust given that situation. |
It's been a while since I've posted.
Here's what I've done in total: Injen Cold Air Intake Koni Sport Shocks Eibach Pro-kit Progress 26.4mm rear sway bar Hondata Flashpro w/ custom dyno tune RV-6 PCD, HFC, and vibrant resonator with stock piping Custom alignment Michelin Pilot Sport A/S 3 Plus Powder-coated red calipers Hawk HP Plus front pads Hawk HPS rear pads Hawk Talon rotors Kenwood DDX-9903s Focal Access components in the front Focal Access 2-ways in the rear Focal 4-channel amplifier for the speakers (not the sub - and I forget which model it is) JBL GT-BassPro12 Also got the mv-tuning hood strut thanks to RatchetRacing Edit: I have a dyno graph that I can post when I remember, but on a 95F day with high humidity it was putting down 180ish whp IIRC. This is also a 5AT. SCCA Solo Points Event 5 (video) https://cimg5.ibsrv.net/gimg/acurazi...c64a96858e.jpg |
The 26.4mm should read 25.4mm.
Next plans are to put on some lighter wheels. Probably the RPF1. |
|
Thanks for the vid! Your car should do better with some RPF1s no doubt. What are your alignment numbers? It looks like you can maybe dial the camber lower a bit to help a bit with the understeering. Nice driving!
|
All times are GMT -5. The time now is 05:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands