SAVCLAUDE Mugen Cu2
The following users liked this post:
kostantinos (11-12-2012)
#165
im gonna have to take my wifes exhaust tips and see how they look.
might have to order some. i like that look much better than the ap2s.
theyre a hell of a lot cheaper too.
when you get your mugen grill, sell me yours!!
LOVE everything about this car!
i might have to try to paint my engine bay trim like that..
hell, sell me your fog light housings too!
ill send you my stock ones + cash for em!
ive been dying to do that. just dont have access to a reasonably priced painter!
might have to order some. i like that look much better than the ap2s.
theyre a hell of a lot cheaper too.
when you get your mugen grill, sell me yours!!
LOVE everything about this car!
i might have to try to paint my engine bay trim like that..
hell, sell me your fog light housings too!
ill send you my stock ones + cash for em!
ive been dying to do that. just dont have access to a reasonably priced painter!
Last edited by BobbyC; 11-12-2012 at 09:10 AM.
#166
test fitted my wifes exhaust tip.
it looks perfect!
i wonder why they didnt use the same tips.
the accord ones look MUCH better.
gonna have to get my brother to order me a set through the dealership.
here you go TTK
i only have the one right now. did you need other angles?
i think theyre a perfect fit and for $33 bucks a pop, a cheap mod
it looks perfect!
i wonder why they didnt use the same tips.
the accord ones look MUCH better.
gonna have to get my brother to order me a set through the dealership.
here you go TTK
i only have the one right now. did you need other angles?
i think theyre a perfect fit and for $33 bucks a pop, a cheap mod
Last edited by BobbyC; 11-12-2012 at 09:41 AM. Reason: pics
#167
Those look pretty great! But I already went and installed some AP2 S2K tips. Its a little bit misaligned on the driver side but overall I am pretty happy. They look very similar to those Accord tips of yours, but the walls looks al little bit thicker. Thanks for the pic
#168
the Ap2s i think are smaller.. im not too sure. its been a while since ive seen em.
i think im gonna get a pair of the accord ones.
they fill out the gap much nicer than the TSX ones.
i think a pair of these would run around $60 or so total for me. where as the AP2s are like $100+.
i think im gonna get a pair of the accord ones.
they fill out the gap much nicer than the TSX ones.
i think a pair of these would run around $60 or so total for me. where as the AP2s are like $100+.
#171
thanks man
im gonna have to take my wifes exhaust tips and see how they look.
might have to order some. i like that look much better than the ap2s.
theyre a hell of a lot cheaper too.
when you get your mugen grill, sell me yours!!
LOVE everything about this car!
i might have to try to paint my engine bay trim like that..
hell, sell me your fog light housings too!
ill send you my stock ones + cash for em!
ive been dying to do that. just dont have access to a reasonably priced painter!
might have to order some. i like that look much better than the ap2s.
theyre a hell of a lot cheaper too.
when you get your mugen grill, sell me yours!!
LOVE everything about this car!
i might have to try to paint my engine bay trim like that..
hell, sell me your fog light housings too!
ill send you my stock ones + cash for em!
ive been dying to do that. just dont have access to a reasonably priced painter!
#174
haha i can guide you to get the material needed you can diy its not that specially on small item
well that was the car then,btw there's a meet on university and ramblewood every thursday night do you go there? i saw a black and a silver 2nd gen a couple times at that spot but never had the chance to meet to who they belong
well that was the car then,btw there's a meet on university and ramblewood every thursday night do you go there? i saw a black and a silver 2nd gen a couple times at that spot but never had the chance to meet to who they belong
#177
haha yeah man you need to give it some flash time minimum 5mns between each coats
#180
#185
#186
i wanted to but i had to work on my other project but im down for next one though
for sure
another Floridian nice
yo of course man i've been going since the firt day this how the accord bay looks like now lots of welding,shaving and bondo work, i even did a harness tuck haha
yup more then a week doing this with motor out
and this is my final result I've been neglecting the tsx to get the accord ready for AFM but once the show is over I'll be putting some more work on her
for sure
another Floridian nice
yup more then a week doing this with motor out
and this is my final result I've been neglecting the tsx to get the accord ready for AFM but once the show is over I'll be putting some more work on her
#191
^^ same here
so i finally did her 1st oil change today after i bought her 8 months ago odo reading 5552 i had another 10% left but wth so i got some mobil1 5w20 along with a mobil1 oil filter also did a tire rotation, checked the air filter,and all the other fluids
I'm a bit messy when it comes to working on car so i did a quick detailing, turtle ice was used to washed it
then i used some meguiar endurance tire gel damn this thing smell like grape fruit and 2 nice coats of wolfgang wax
pretty happy with the outcome, so far with the minor mods that I've done the sway bars are by far the best this thing handles so much better even with stock height
future mods
mugen window visors(bought not installed yet)
coilovers(also bought not installed)
camber kit
wheels I wanted 20'' at first but 19" by some 10'5 would be just fine
hoping to be lucky and get a mugen front bumper
so i finally did her 1st oil change today after i bought her 8 months ago odo reading 5552 i had another 10% left but wth so i got some mobil1 5w20 along with a mobil1 oil filter also did a tire rotation, checked the air filter,and all the other fluids
I'm a bit messy when it comes to working on car so i did a quick detailing, turtle ice was used to washed it
then i used some meguiar endurance tire gel damn this thing smell like grape fruit and 2 nice coats of wolfgang wax
pretty happy with the outcome, so far with the minor mods that I've done the sway bars are by far the best this thing handles so much better even with stock height
future mods
mugen window visors(bought not installed yet)
coilovers(also bought not installed)
camber kit
wheels I wanted 20'' at first but 19" by some 10'5 would be just fine
hoping to be lucky and get a mugen front bumper
#197
^^ thanks guys
not much done to her lately, i did a small touch on the interior and I'm liking it 1st of thanks to ssjoeboe9 for DIY trim removal
I didn't like much the matte grey so i thought why not color match with the car
3 coats of CBP base and 3 coats of clear,they all came out very nice with no dirt,no dry spot simply perfect
on the car
that's all folks
now i wonder if maybe i should to the same for the cup holder and around the shift boot? what ya'll think?
not much done to her lately, i did a small touch on the interior and I'm liking it 1st of thanks to ssjoeboe9 for DIY trim removal
I didn't like much the matte grey so i thought why not color match with the car
3 coats of CBP base and 3 coats of clear,they all came out very nice with no dirt,no dry spot simply perfect
on the car
that's all folks
now i wonder if maybe i should to the same for the cup holder and around the shift boot? what ya'll think?
Last edited by savclaude; 01-12-2013 at 04:58 PM.