opboarding's 2011 GLM V6 - satisfaction guaranteed!
#82
Everyday I'm rofling
Thread Starter
#84
Everyday I'm rofling
Thread Starter
#86
Everyday I'm rofling
Thread Starter
This weekend I made a trip down to College Station, Tx and I decided to take as many back roads/farm to market roads as I could on this 3.5 hour journey. I always take the interstate, which is really flat and straight the entire way which is boring. On my way back today I took my time and stopped to enjoy some of the countryside and took a few pictures.They were taken with my phone and edited a little bit in photoshop with my non existent art/photography skills.
Last edited by opboarding; 05-13-2012 at 09:18 PM.
#88
ROTAREDOM
+1 for not being asian
#93
Everyday I'm rofling
Thread Starter
He's right, I'm not asian. Pretty hard to tell in that picture, maybe it was the hair that gave it away? Maybe he pulled some high tech CSI stuff on it. Enhance!
The following 2 users liked this post by ed_423:
718Tsx (05-14-2012),
TWENTYNINE (04-04-2013)
#96
Everyday I'm rofling
Thread Starter
I know there is already a thread for these in the photography sub thread but I wanted to also document these here. You know, because they are awesome.
And while I'm at it here's one from last weekend in Houston with justnspace and I are LEGEND.
And while I'm at it here's one from last weekend in Houston with justnspace and I are LEGEND.
#104
ROTAREDOM
#105
Everyday I'm rofling
Thread Starter
So I just spent the last 9 hours installing the coils. I am completely spent. Doing this by yourself and not having the right tools is not the way I should have approached this. I lowered around 1" on front and back, but if they settle any it might be more like 1.1" or something. I didn't have time to install the control arms, maybe next weekend. I finished when it was dark so I'll take some pictures tomorrow.
#106
SeeYou2Crew #2
damn bro you did it alone?? good job man haha. no way in hell i could've done it alone without my friend's help.
FYI coils dont really settle too much. i didnt notice much settling for mine
FYI coils dont really settle too much. i didnt notice much settling for mine
#107
Everyday I'm rofling
Thread Starter
As much I hate having to look at other people terrible quality phone pictures, this is all I have, so deal with it. Before and after pictures of coilovers. Didn't have time to put spacers on, but they will be on soon. I am about 1.1" rear and 1.2" front according to my crappy "before" measurements. Could be a little inaccurate but now we'll never know for sure. I am thinking about either going .1"-.2" lower in the front(or raising the rear that much) to give a little more of a rake look. I already scraped my bumper on the steep garage entry at my work today, so lower in the front might be a bad idea. Its really hard to take it at enough of an angle the way the garage
is laid out...
Got some camber (15mm spacers going on this weekend)
And I found this mischievous little guy while installing the coils...
is laid out...
Got some camber (15mm spacers going on this weekend)
And I found this mischievous little guy while installing the coils...
#108
As much I hate having to look at other people terrible quality phone pictures, this is all I have, so deal with it. Before and after pictures of coilovers. Didn't have time to put spacers on, but they will be on soon. I am about 1.1" rear and 1.2" front according to my crappy "before" measurements. Could be a little inaccurate but now we'll never know for sure. I am thinking about either going .1"-.2" lower in the front(or raising the rear that much) to give a little more of a rake look. I already scraped my bumper on the steep garage entry at my work today, so lower in the front might be a bad idea. Its really hard to take it at enough of an angle the way the garage
is laid out...
is laid out...
#109
Everyday I'm rofling
Thread Starter
Theres a light scrape across most of the bottom of the front bumper. You cant see it since its underneath so its not a big deal to me.
#110
ROTAREDOM
100% better bro.The moderate drop looks great! I loved how mine looked when I installed my springs! Can't believe you did the install by yourself. It's the engineer in you.
#115
The following 3 users liked this post by KillerG:
#116
Looks great man. And that really does look mischievous
#117
Everyday I'm rofling
Thread Starter
I cut squares that were about 4" wide out of a cheap sheet of aluminum. I drilled a hole in them and put them behind the bottom mesh, then used bolts to attach to the plate frame.
Today: killerg feels like he isnt annoying enough as he is. Decides to use large text.
The following users liked this post:
TWENTYNINE (04-04-2013)
#118
Everyday I'm rofling
Thread Starter
#119
Everyday I'm rofling
Thread Starter
Oh and I also installed the J power 3 piece rear control arms this weekend too. I didnt have time to do the front ball joints but I'll put them on in the next week or two. The rear arms feel just like factory did. Car is driving great so far.
#120
Everyday I'm rofling
Thread Starter
next page