Onky's Accord Euro CU2 (Aussie Spec)
#1
Onky's Accord Euro CU2 (Aussie Spec)
Hey all,
I'm new to the club - bought my Honda Accord Euro from a dealership on April 1st 2015.
Her name is "Yuki" - means "Snow" in Japanese.
Current mods:
- 20" King Matrix Black Piped Wheels (+43) with Pirelli 245/35r20 Tyres
- DVD screens in headrests
- Silver Globes for all indicators
- LED interior, parkers and reverse globes
- Gloss Black vinyl wrapped roof
- Debadged
- Removed chrome handle scuff plates
Future mods:
- Roll guards, with Eibach Pro kit (Waiting in the garage)
- Camber kit
- HID fog light upgrade
- Plastic Dip front and rear diffusers
- ICE upgrade
- Many other ideas...
Day I picked her up:
I'm new to the club - bought my Honda Accord Euro from a dealership on April 1st 2015.
Her name is "Yuki" - means "Snow" in Japanese.
Current mods:
- 20" King Matrix Black Piped Wheels (+43) with Pirelli 245/35r20 Tyres
- DVD screens in headrests
- Silver Globes for all indicators
- LED interior, parkers and reverse globes
- Gloss Black vinyl wrapped roof
- Debadged
- Removed chrome handle scuff plates
Future mods:
- Roll guards, with Eibach Pro kit (Waiting in the garage)
- Camber kit
- HID fog light upgrade
- Plastic Dip front and rear diffusers
- ICE upgrade
- Many other ideas...
Day I picked her up:
#3
Headrest DVD Screens
Headrest DVD Screens
These came with the car when I bought it. They have individual DVD drives each, but the drivers side can act as a master, and allows the passenger side to view the same thing.
I also like that they zip up when not in use for a 'stealthy' appearance.
I plan to install a DVD screen upfront eventually and will run these off that unit too.
These came with the car when I bought it. They have individual DVD drives each, but the drivers side can act as a master, and allows the passenger side to view the same thing.
I also like that they zip up when not in use for a 'stealthy' appearance.
I plan to install a DVD screen upfront eventually and will run these off that unit too.
#4
Debadged
Debadged
One of my favourite mods on any car. Cleans up the appearance of the back end quite dramatically.
Used fishing line and "cut" the double sided tape, slicing between the badges and the car.
Cleaned up left over double sided tape with bug/tar remover then finished up with a quick little polish. Not a mark left on the car.
Before:
After:
One of my favourite mods on any car. Cleans up the appearance of the back end quite dramatically.
Used fishing line and "cut" the double sided tape, slicing between the badges and the car.
Cleaned up left over double sided tape with bug/tar remover then finished up with a quick little polish. Not a mark left on the car.
Before:
After:
#5
Gloss Black Vinyl Wrapped Roof
Gloss Black Vinyl Wrapped Roof
Ever since wanting this car in white, I wanted a black roof!
Today my vinyl arrived and I attacked it. I had never worked with vinyl before so this was a new experience for me.
Let me just say, this is not for the feint of heart DIY'er. It is by no means an easy task and requires a lot of patience. It's not a perfect job, but for my first effort, I am very pleased.
Here is the finished product:
Ever since wanting this car in white, I wanted a black roof!
Today my vinyl arrived and I attacked it. I had never worked with vinyl before so this was a new experience for me.
Let me just say, this is not for the feint of heart DIY'er. It is by no means an easy task and requires a lot of patience. It's not a perfect job, but for my first effort, I am very pleased.
Here is the finished product:
#6
TSX AMG Type //M i-VVT
Somebody definitely added those chrome handle plate things aftermarket.... they didn't look very good and that's not an oem peices.
Car looks good now!
Car looks good now!
Trending Topics
#8
Racer
and nice car man, id love to come to aus and see the car scene for my self. you guys have some great stuff down there !
#9
Hidden iPhone Cable
Hidden iPhone Cable
I was a little sick of my iPhone cable sticking out of the top of the centre console so I decided to do a little poke around.
After removing the gear surround/cup holder trim, I was able to unplug and unclip the USB socket from behind/beneath the centre console. After dismantling it, I was able to run the lightning cable alongside the existing cable inside.
I could have unplugged it all and had it all hidden under the trim, but I thought this way I could still access it in case I wanted to plug something else in.
I then ran the cable beneath the centre trim and brought it up from the gap near the handbrake. This is where my phone holder sits.
Neat little mod.
I was a little sick of my iPhone cable sticking out of the top of the centre console so I decided to do a little poke around.
After removing the gear surround/cup holder trim, I was able to unplug and unclip the USB socket from behind/beneath the centre console. After dismantling it, I was able to run the lightning cable alongside the existing cable inside.
I could have unplugged it all and had it all hidden under the trim, but I thought this way I could still access it in case I wanted to plug something else in.
I then ran the cable beneath the centre trim and brought it up from the gap near the handbrake. This is where my phone holder sits.
Neat little mod.
The following users liked this post:
xtcnrice (04-14-2015)
#10
Removed centre trim scratches
Removed centre trim scratches
This isn't a "mod" as such, but just detailing really.
I pulled up the gear surround/cup holder trim and gave it a nice little polish to remove the scratches.
I will probably hit it up with some "Scratch-X" soon to get rid of the swirls but at least many of the main visible scratches have been removed.
Before:
After:
This isn't a "mod" as such, but just detailing really.
I pulled up the gear surround/cup holder trim and gave it a nice little polish to remove the scratches.
I will probably hit it up with some "Scratch-X" soon to get rid of the swirls but at least many of the main visible scratches have been removed.
Before:
After:
#12
#13
TSX AMG Type //M i-VVT
I wish i would have done that one ^
i have a few scratches now from loading / unloading stuff. and my rear bumper doesn't even have clearcoat
i have a few scratches now from loading / unloading stuff. and my rear bumper doesn't even have clearcoat
#15
TSX AMG Type //M i-VVT
#18
Debadged
One of my favourite mods on any car. Cleans up the appearance of the back end quite dramatically.
Used fishing line and "cut" the double sided tape, slicing between the badges and the car.
Cleaned up left over double sided tape with bug/tar remover then finished up with a quick little polish. Not a mark left on the car.
Before:
One of my favourite mods on any car. Cleans up the appearance of the back end quite dramatically.
Used fishing line and "cut" the double sided tape, slicing between the badges and the car.
Cleaned up left over double sided tape with bug/tar remover then finished up with a quick little polish. Not a mark left on the car.
Before:
How much for the Euro badge shipped to the USA?
#19
Beautiful car. Wish I had your grille and headlights.
#21
#23
Source us headlights and grilles
#25
#26
#28
JDM Style Pedals
#32
Lowered on Eibach Springs
Lowered on Eibach Springs
She is finally lowered after getting the guards rolled for precaution and maybe future wheel changes.
Installed the Eibach Pro Kit with factory shocks. Overall drop is about 1" which I'm very happy with. Ride is a little stiffer, but handling is a lot better.
Here are the pics:
She is finally lowered after getting the guards rolled for precaution and maybe future wheel changes.
Installed the Eibach Pro Kit with factory shocks. Overall drop is about 1" which I'm very happy with. Ride is a little stiffer, but handling is a lot better.
Here are the pics:
#34
I only get one day off a week so last week I spent that day getting the guards rolled, this week was the suspension.
Maybe next week...
The following users liked this post:
xtcnrice (05-21-2015)
#38
My last trip there, my friend had bought a Porsche and it ended up costing him about 3 x's what it'd cost in the U.S. !! Do they still stick it to you unless it's an Aussie-built car ??? Craig
#39
DRLs and PlastiDip
DRLs and PlastiDip
So after a teaser a little while ago, I finally got around to finishing the DRLs.
And while the bumper was off, I also had some fun with PlastiDip.
I "PlastiDipped" the front lip, the two inner griller inserts and the rear diffuser.
Here are the photos:
DRL Kit from eBay:
Needed to be cut to fit, template made:
Lens and Board cut:
Test fit:
Wiring Run:
Testing:
It's all about the prep work:
First coat:
After 4 coats of black, 2 coats of glossifier:
Masking removed carefully:
One last test:
Finished products:
So after a teaser a little while ago, I finally got around to finishing the DRLs.
And while the bumper was off, I also had some fun with PlastiDip.
I "PlastiDipped" the front lip, the two inner griller inserts and the rear diffuser.
Here are the photos:
DRL Kit from eBay:
Needed to be cut to fit, template made:
Lens and Board cut:
Test fit:
Wiring Run:
Testing:
It's all about the prep work:
First coat:
After 4 coats of black, 2 coats of glossifier:
Masking removed carefully:
One last test:
Finished products:
#40
Hey I saw your car in the Melb CBD parking on Saturday night and googled your number plate and look where I landed Your car looks great!!
My graphite euro was parked on the same level (With the modulo kit).
I'll definitely be keeping an eye on ur blog! I'm thinking of doing some mods as well on mine like DRLs, Spirior LED tail lights etc....
My graphite euro was parked on the same level (With the modulo kit).
I'll definitely be keeping an eye on ur blog! I'm thinking of doing some mods as well on mine like DRLs, Spirior LED tail lights etc....